Abstract:：Buckling is one of the most important failure modes for thin-walled cylindrical shell structures under axial compression loads.Based on the fact that the load carrying capacity of thin-walled cylindrical shell structures under axial compression loads are very sensitive to initial imperfections, the theoretical, experimental and numerical research works done by domestic and foreign researchers for more than half a century in considering the influence of initial imperfections on the critical buckling load of axial loaded cylindrical shells are systematically reviewed.Researches have shown that two kinds of equivalent methods to consider the effects of initial imperfections have been established, namely, the deterministic approach based on numerical analysis and the non-deterministic approach under statistical probabilistic theory.Specifically, the former mainly focuses on the initial geometric imperfections, while the latter also includes non-traditional initial imperfections, such as material, thickness and loading imperfections, etc.These two methods have their own characteristics and advantages in predicting the axial load carrying capability of cylindrical shells and conducting buckling design.Compared with the test results, the highest prediction accuracy of the multiple perturbation load approach and single boundary perturbation approach can reach more than 90% and also has a certain safety margin simultaneously.Finally, some research direction and relevant urgent works in the future about the buckling problems of thin-walled cylindrical shell structures considering initial imperfection sensitivity are pointed out, which can provide some guides for related researches. Key words： thin-walled

Buckling Pressure of Imperfect Spherical Shell Damaged by Concentrated Impact Load

Elastic-plastic dynamic stability analysis of single layer spherical latticed shells considering damage accumulation effect

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Buckling of Spherical Shells with Pitting Corrosion under External Pressure

Buckling failure analysis of PMMA spherical pressure hull

Buckling of cylindrical shells with general axisymmetric thickness imperfections under external pressure

Influence of Initial Imperfections on Ultimate Strength of Spherical Shells

Investigation of Crack Propagation and Failure of Liquid-Filled Cylindrical Shells Damaged in High-Pressure Environments

Destabilization of Cylindrical Shells Coupling Effect of Local Impact Load and Circumferential Pressure

Numerical Simulation of Spherical Shell's Fracture Caused by the Inside-Explosive Loading

Buckling of composite cylindrical shells with ovality and thickness variation subjected to hydrostatic pressure

Dynamic response of cylindrical shell supporting structure under multiple impacts: experimental and numerical investigation

Buckling and Post-Buckling Behavior of Perfect/Perforated Composite Cylindrical Shells under Hydrostatic Pressure

STUDY ON DEFORMATION CONTROL METHOD OF SHALLOW SPHERICAL SHELLS UNDER IMPACT LOADS

On Elastic-Plastic Collapse of Subsea Pipelines under External Hydrostatic Pressure and Denting Force

Impact Experiment and Buckling Criterion Analysis of Thin-Walled Cylindrical Shells

Investigation of the Dynamic Buckling of Spherical Shell Structures Due to Subsea Collisions

Imploding Load Induced Deformation and Spallation of Thermal-Plastic Spherical Shell of Medium Thickness

Experimental investigation and computer simulation on dynamic buckling behavior of liquid-filled cylindrical shells under axial impact