Abstract:The two-phase loop thermosyphon (TPLT) with a high filling ratio is considered an efficient heat transfer device and therefore has a good application prospect in the field of high heat flux dissipation engineering. However, the heat transfer mechanism of the TPLT with high filling ratios remains elusive. In this study, we establish a computational fluid dynamics (CFD) model of the loop thermosyphon. In order to accurately simulate boiling and condensation processes, we take into account the relationship between saturation temperature and pressure in the phase change model. There were two flow patterns, i.e., the bubbly flow and the slug flow, under low filling ratios in the heating section, in which the pool boiling dominates the main heat transfer mechanism, and dropwise condensation occurred in the condensation section. The driving force to propel the liquid during the vapor bubbles rise cannot be transferred to the liquid in the right tube, resulting in lower flow velocity. In stark contrast, the single-phase flow and the bubbly flow occurred periodically in the loop thermosyphon with high filling ratios, in which the dominant heat transfer mechanism is the flow boiling. The rising bubbles promote the clockwise flow of liquid in the loop like a pump. Because of the switch of the heat transfer mechanism, the average flow velocity increased, and the thermal resistance decreased. The minimum thermal resistance was 0.15 K/W under a filling ratio of 75%, and the maximum average velocity of the fluid was 0.19 m/s. Furthermore, we found a strong coupling relationship between the heat transfer performance and the flow characteristics of the loop thermosyphon. For low filling ratios, local dry-out occurred in the loop thermosyphon under a high input heat flux, leading to an increase in the thermal resistance. For high filling ratios, the average velocity of the fluid was augmented with the increase in heating power, while the liquid was capable of being replenished quickly in the heating section to avoid the dry-out. Therefore, the loop thermosyphon with high filling ratios enables a better heat transfer performance under a high heat flux than those with low filling ratios.

Investigation of a loop heat pipe to achieve high heat flux by incorporating flow boiling

Simulation of Steady-State Operation of an Ejector-Assisted Loop Heat Pipe with a Flat Evaporator for Application in Electronic Cooling

Experimental investigation on the thermal performance of a novel loop heat pipe (LHP) with micro-channel structure

Experimental study on a rectangular evaporator loop heat pipe with a phase-change material heat sink

Experimental Investigation on the Temperature Distribution Characteristics of the Evaporation Section in a Pulsating Heat Pipe

Visualization study of a flat confined loop heat pipe for electronic devices cooling

Experimental Investigation on the Heat Transfer Performance and Evaporation Temperature Fluctuation of a New-Type Metal Foam Multichannel Heat Pipe

Experimental investigation of a loop heat pipe with a flat evaporator and cupric oxide nanofluids as working fluid

Advanced loop heat pipe application for cooling high power LED lights

Experimental Study on an Thermosyphon Loop with Bubble Pump Effect

Experimental investigation on the start-up performance of a novel flat loop heat pipe with dual evaporators

Development of hybrid loop heat pipe using pump assistance for cooling application on high heat flux device

Experimental investigation for the loop heat pipe with a bifacial flat evaporator

Performance of a novel loop heat pipe coupled with micro vapor-driven jet injector – An experimental and numerical study

Experimental Investigation Thermal Performance of Loop Heat Pipe Operating with Different Working Fluids

Investigation of a Gas-Pump-Driven Loop Heat Pipe

Experimental investigation on the start-up performance of a loop heat pipe with three flat disk evaporators combined

Study of Heat Dissipation Characteristics of Loop Heat Pipe with Heat Sink of Composite Material

Study of a new thin flat loop heat pipe for electronics

Numerical simulation on the heat transfer characteristics of two-phase loop thermosyphon with high filling ratios

Experimental research on the thermal performance of a flat evaporator loop heat pipe with a new composite wick