Abstract:High-temperature superconductor (Re)Ba2Cu3Ox (ReBCO) conductor on round core cable (CORC®) has a large current carrying capacity for high field magnets. Lorentz forces acting on CORC conductors, cause a reduction of the critical current, or even permanent degradation of their performance when exceeding critical values. Transverse compressive stress is one of the principal mechanical stresses when CORC cables are bundled to CICC conductors capable of operating at currents up to 100 kA in magnetic fields of up to 20 T. In this research, a mechanical-electromagnetic model is developed to study the effect of transverse compressive loads on the electromagnetic performance of CORC cables. A mechanical transverse load on the cable is implemented to simulate the electromagnetic force. A comparison of numerical simulations with experiments for a three-layer CORC cable is first performed to validate the model's reliability, with particular attention to critical current reduction during the transverse compression process. A novel feature of this paper is that the model developed can analyze both mechanical response under transverse compressive loads and electromagnetic performance under applied AC magnetic fields with low amplitudes. On this basis, the model investigates the effects of winding parameters on the axial strain and critical current reduction of the ReBCO layer in a single-layer CORC cable. The numerical analysis shows that increasing the winding angle can reduce the axial strain and critical current reduction of the ReBCO layer in the contact area. Subsequently, a detailed comparative study is carried out studying the axial strain of the ReBCO layer in the non-contact area with and without taking the winding core into account. In addition, a sudden increase of the magnetization loss is explained when the transverse compressive load reaches a certain level. Finally, a six-layer CORC cable's electromagnetic analysis is performed, and each tape layer's critical current reduction is investigated and discussed. The comparison of magnetization loss and current density between six- and single-layer CORC cables in the no-strain case is also given. This FE model can guide optimizing a cable design for specific application conditions.

Magnetization Loss of Corc Cables under Axial Tensile Loading

Numerical Analysis of the Mechanical and Electrical Properties of CORC Cables under Torsional Loading

Investigating the effect of transverse compressive loads on the electromagnetic performance of superconducting CORC® cables

Prediction of strain, inter-layer interaction and critical current in CORC<sup>®</sup> wires under axial strain by T-A modeling

Prediction of strain, inter-layer interaction and critical current in CORC (R) wires under axial strain by T-A modeling

Analysis of Mechanical Properties of Each Layer of Superconducting Tape of Multi-Layer CORC Cable under Transverse Compression Load

Magnetization Loss Characteristics in Superconducting Conductor on Round Core Cables with a Copper Former

Study on Torsion Behavior of Superconducting Conductor on Round Core Cable

Mechanical Response of Conductor on Round Core (CORC) Cables Under Electromagnetic Force

Experimental and Numerical Study on the Transport AC Loss of Bent CORC Cables

Analysis on the Transverse Compression Performance of the CORC Cable

A method to model the electromagnetic performance of bent CORC® wires for SMES magnets

Study on the Influence of Thermal and Magnetic Field on CORC Cable Properties by a 2D Model

Analysis of AC Transport Loss in Conductor on Round Core Cables

The Impacts of Winding Direction on the Electromagnetic Characteristics of CORC Cables

Numerical Study on AC Loss Characteristics of Conductor on Round Core Cables under Transport Current and Magnetic Field

Mechanical behavior of multi-layer CORC cable in high external field with 3D numerical model

Numerical Study on Mechanical Properties of Conductors on Round Core Cables

Analytical Analysis of Hollow CORC Cable under Thermo-Mechanical Loads

Numerical Simulation of the Mechanical Behavior of Superconducting Tape in Conductor on Round Core Cable Using the Cohesive Zone Model

Experimental Research on the Influence of HTS Tape Width and Former Type on the Transverse Compression Performance of CORC Cables