Abstract:The porous structure formed by the interweaving of yarns in textiles is favorable for sound absorption. However, the absorption of sound waves by porous materials conforms to the law of linear response, which leads to poor sound absorption of textiles in the low-frequency range. It is usually necessary to increase the thickness to improve the low-frequency acoustic absorption performance of textiles, which does not meet the performance requirements of lightness, thinness, width and strength. This work proposes a method to increase the acoustic absorption performance based on acoustic-electric conversion and yarn resonance effect. In the form of a woven spacer fabric structure, different parts of the structure were prepared using nylon and PVDF yarns with different triboelectric sequences to realize acoustic-electric conversion between dielectric materials. Control samples woven with the same material were also prepared. Further, the resonance frequency of the yarns was modulated by controlling their tension to change the resonant frequency corresponding to the maximum acoustic-electric conversion efficiency and sound absorption peak. It was found that fabrics composed of two different materials had better sound absorption than fabrics composed of only one material. This is because the larger triboelectric sequence difference between materials results in more charge transfer, which favors acoustic-electric conversion and acoustic energy consumption. A significant acoustic absorption peak at 390 Hz with a peak value of about 0.05 was observed for a fabric with a thickness of about 4 mm after tension adjustment. This study demonstrates that acoustic-electric conversion between dielectric yarns and proper tension control improves the acoustic absorption efficiency and provides a reference for the development of structures based on this novel acoustic absorption mechanism.

Investigation on the Sound Absorption of Multilayered Woven and Nonwoven Fabrics with Different Bonding Conditions

Acoustic Properties of Glued Laminated Bamboo and Spruce-Pine-fir

Fabrication of flexible sound absorption composite by constructing membrane with damping function on fabric

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Design and Acoustical Performance Investigation of Sound Absorption Structure Based on Plastic Micro-Capillary Films

Sound absorption performance of folded structures prepared from woven prepreg and porous material composites

Enhanced broadband sound absorption of multi-layer composite material based on three-dimensional warp-knitted spacer fabric

Research Progress on Sound Absorption of Fiber-Based Materials and Their Composites

Fabrication, sound absorption simulation and performance optimization of multi‐layer gradient fiber‐based composites

Sound absorption property of nonwoven based composites

Influential properties on sound-absorption behavior of textile material-based multi-layer composite

Sound absorption coefficient analysis and verification of weft-knitted spacer fabrics for noise reduction application

Assessing the Sound and Heat Insulation Characteristics of Layered Nonwoven Composite Structures Composed of Meltblown and Recycled Thermo-Bonded Layers

Preparation and Characterization of Waste Cotton Fabric Reinforced Polylactic Acid Green Composites with Multifunctional Properties in a Low-Carbon Process

Composite Sound-Absorbing Materials Using Electrospun PS Fibrous Membranes and Needle-Punched PET Non-Woven Fabrics

Nylon/PVDF Spacer Fabric with Acoustic-Electric Conversion and Yarn Resonance Effect for Improved Low-Frequency Sound Absorption Property

Design of microperforated nanofibrous membrane coated nonwoven structure for acoustic applications

Simulation, measurement and optimization of sound absorption in gradient impedance fiber-based composites

Study on Void Formation in Multi-Layer Woven Fabrics

Dynamic cushion, quasi-static stab resistance, and acoustic absorption analyses of flexible multifunctional inter-/intra-bonded sandwich-structured composites

Investigation and prediction of laminate quality and interlaminar mechanical performance of the tufted sandwich composites with different core structures