Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Multi-objective Optimization of Printed Circuit Heat Exchanger Used for Hydrogen Cooler by Exergoeconomic Method

Multi-objective optimization of precooled JT cryocooler working at liquid hydrogen temperature

Multi-objective Optimization Design and Strength Analysis of Printed Circuit Heat Exchangers for Supercritical CO2 Brayton Cycle

A Novel Optimization Framework for Designing Multi-Stream Compact Heat Exchangers and Associated Network

Simultaneous Optimization of a Heat Exchanger Network and Operating Conditions of Organic Rankine Cycle

Multi-objective optimization of heat exchange network and thermodynamic cycles integrated system for cooling and power cogeneration

Optimizing the size of a printed circuit heat exchanger by multi-objective genetic algorithm

A Thermal Design Method for the Performance Optimization of Multi-Stream Plate-Fin Heat Exchangers

Multi-objective optimization research of printed circuit heat exchanger based on RSM and NSGA-II

Flow pattern analysis and multi-objective optimization of helically corrugated tubes used in the intermediate heat exchanger for nuclear hydrogen production

Multi-objective Optimization of Heat Exchanger Networks Based on Analysis of Minimum Temperature Difference and Accumulated CO2 Emissions

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Multi-objective Optimization on a Heat Exchanger Network Retrofit with a Heat Pump and Analysis of CO2 Emissions Control

Optimization of Cooler Networks with Different Cooling Types in Series and Parallel Configuration

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter

Comparisons and optimization of two absorption chiller types by considering heat transfer area, exergy and economy as single-objective functions

Multi-objective optimization of hollow fiber membrane-based water cooler for enhanced cooling performance and energy efficiency

Methodology of design and analysis on the thermal hydraulic performance of the cross-flow printed circuit heat exchanger

Numerical investigation on thermal-hydraulic performance of variable cross section printed circuit heat exchanger

A New Computer-Aided Optimization-Based Method for the Design of Single Multi-Pass Plate Heat Exchangers

An Optimization Study on the Finned Tube Heat Exchanger Used in Hydride Hydrogen Storage System – Analytical Method and Numerical Simulation