Abstract:Solid polymer electrolytes (SPEs) were investigated for several decades due to their good compatibility with electrodes. However, meeting the essential requirements for solid polymer electrolytes, including enhanced ionic conductivity, superior solubility with conductive lithium salts, and robust interface stability when in contact with a Li anode, remains a formidable challenge. In our work, we found that transition metal carbides (NiNbCeC) over mesoporous silica (SBA-15) can be filled into the Polyethylene Oxide (PEO) matrix to form composite solid electrolytes which can greatly improve the ionic conductivity of PEO. We investigate a series of transition metal carbides with varying mass ratios of Cerium (5%, 10%, and 20%) to fabricate All-Solid-State Li-S batteries (ASSLi-S). Our results demonstrate that different mass ratios of Cerium play a pivotal role in enhancing the ionic conductivity of the composite solid electrolytes, reducing impedance levels from 9150 O (20% Ce) to 4000 O (5% Ce) to 1730 O (10% Ce). At room temperature, the high initial specific capacity at 1C and reversible specific capacity after 100 cycles are 525 and 363 mAh/g, 605 and 403 mAh/g, 246.3 mAh/g and 63.28 mAh/g for 5% Ce, 10%, and 20%, respectively. Furthermore, long-term cycling tests of ASSLi-S cells at 0.5C reveal promising performance, with the cell containing 10% Ce solid electrolytes delivering an initial specific capacity of 1165.7 mAh/g and maintaining 335 mAh/g after 200 cycles. This represents a significant breakthrough, demonstrating that PEO-based solid electrolytes can achieve impressive electrochemical results at room temperature. SEM characterization was employed to assess the volume change in the solid electrolyte layer and elemental distribution of solid electrolyte materials through cross-sectional analysis. This analysis revealed that the failure modes of solid-state Li-S cells can also be attributed to the migration of sulfur elements from the cathode to the solid electrolyte layer during the cycling process. XRD was utilized to study the crystallinity of composite solid electrolytes. This study represents a significant stride in the progress of high-performance solid polymer electrolytes for All-Solid-State Li-S batteries, shedding light on the failure modes of such batteries. It underscores the potential of composites based on transition metal carbides in addressing crucial challenges for their practical implementation in Solid-State Lithium-Sulfur Batteries.

Strategies and characterizations enabling high performance PEO-based solid-state lithium-ion batteries

Strategies and characterization methods for achieving high performance PEO-based solid-state lithium-ion batteries

Enabling Stable Cycling of 4.2 V High‐Voltage All‐Solid‐State Batteries with PEO‐Based Solid Electrolyte

Constructing robust cathode/Li interfaces and intensifying ion transport kinetics for PEO-based solid-state lithium-sulfur batteries

Polyethylene Oxide-Based Composite Solid Electrolytes for Lithium Batteries: Current Progress, Low-Temperature and High-Voltage Limitations, and Prospects

Research Progress and Application of PEO-Based Solid State Polymer Composite Electrolytes

Development of the PEO Based Solid Polymer Electrolytes for All-Solid State Lithium Ion Batteries

PIM‐1 as a Multifunctional Framework to Enable High‐Performance Solid‐State Lithium–Sulfur Batteries

Polyethylene Oxide-Based Composites as Solid-State Polymer Electrolytes for Lithium Metal Batteries: A Mini Review

Composite Electrolytes of Pyrrolidone-Derivatives-peo Enable to Enhance Performance of All Solid State Lithium-Ion Batteries

Lithium-rich high entropy oxide with abundant oxygen vacancies for composite polymer all-solid-state Li-S batteries

Breaking the Trade‐Off Between Ionic Conductivity and Mechanical Strength in Solid Polymer Electrolytes for High‐Performance Solid Lithium Batteries

Design Strategies for Polymer Electrolytes with Ether and Carbonate Groups for Solid-State Lithium Metal Batteries

A High-Performance Self-Reinforced PEO-Based Blend Solid Electrolyte Membrane for Solid-State Lithium Ion Batteries

Novel PEO-based composite solid electrolytes for all-solid-state Li-S battery

Strategies of constructing highly stable interfaces with low resistance in inorganic oxide-based solid-state lithium batteries

Tailoring Stable PEO‐Based Electrolyte/Electrodes Interfaces via Molecular Coordination Regulating Enables 4.5 V Solid‐State Lithium Metal Batteries

Single Lithium-Ion Conducting Solid Polymer Electrolyte with Superior Electrochemical Stability and Interfacial Compatibility for Solid-State Lithium Metal Batteries

Garnet/polymer solid electrolytes for high-performance solid-state lithium metal batteries: The role of amorphous Li2O2

Advancements in Performance Optimization of Electrospun Polyethylene Oxide-Based Solid-State Electrolytes for Lithium-Ion Batteries

An All-Solid-State Battery Based on Sulfide and PEO Composite Electrolyte.