Abstract:A new model characterizing the IR drop in an active-matrix organic light-emitting diode (AMOLED) display is built successfully by this study, which can be used to effectively improve brightness uniformity by adjusting gray levels addressed accordingly to pixels in the panel. The IR-drop refers to the voltage drops along the thin power lines from the external driver at panel edge to internal pixels. The built IR-drop model is in a form of vector and matrix with parameters and variables such as equivalent resistances of horizontal/vertical power lines and the current through the drive thin film transistors (TFTs) and OLEDs in pixels. With precisely calibrated parameters, the model can be solved for the voltage drops at given sub-pixels in the AMOLED panel. Based on the solved dropped voltages at each pixel, the gray level assigned to the pixel can be adjusted accordingly to restore the desired pixel luminance. The proposed compensation was implemented in a 14-inch AMOLED panel with FHD resolution for performance validation. The experimental results show less than 2.5% of prediction error on voltage drops, leading to effective compensations that improves the measured pixel currents from 66.1% to 89.7%, 70.3% to 92.9%, and 48.8% to 85.1% of the desired, non-dropped currents, respectively, for red, green, and blue illuminance at the L255 gray level. Also from experiments are substantial improvements of 21.7%, 21.5%, and 35.3% on the brightness uniformity of the panel displayed for red-, green-, blue-images at L255 gray, respectively.

The IR Drop Effect of 2T1C and 3T1C Driving Modes in Top Emission AMOLED

A New IR-Drop Model That Improves Effectively the Brightness Uniformity of an AMOLED Panel

Effect of Transparent Capacitor on the Panel Uniformity of Bottom Emission AMOLED

A Method to Improve IR Drop Issue of Large-Size Top-Emission AMOLED

IR-Drop-Based Temperature Distribution in Large-Size AMOLED Panel

P‐13.10: A New Color Space Model for AMOLED Display Based on IR Drop

Power Consumption Model for AMOLED Display Panel Based on 2T-1C Pixel Circuit

P‐13.11: Highly Efficient Electric‐Thermal Simulation for AMOLED Design

A New Voltage Driving Scheme to Suppress Non-Idealities of Polycrystalline Thin-Film Transistors for Amoled Displays

Improvement in Brightness Uniformity by Compensating for the Threshold Voltages of Both the Driving Thin-Film Transistor and the Organic Light-Emitting Diode for Active-Matrix Organic Light-Emitting Diode Displays

Highly Uniform Low Gray AMOLED Pixel Using Stable Circuit and Duty Ratio Modulation Driving

Influence of Driving Current on Photometric Performances of a White Light OLED

Improving Flicker of Low-Refresh-Rate Driven Active-Matrix Organic Light-Emitting Diode Display

An AC Driving Pixel Circuit Compensating for TFTs Threshold-Voltage Shift and OLED Degradation for AMOLED

An Amoled Ac-Biased Pixel Design Compensating The Threshold Voltage And I-R Drop

An AMOLED AC-Biased Pixel Design Compensating the Threshold Voltage and<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mi>I</mml:mi><mml:mtext>-</mml:mtext><mml:mi>R</mml:mi></mml:math>Drop

Investigation on Improving Color Crosstalk for High-Transmittance TFT-LCDs

Ltps-Tft Pixel Circuit Compensating for Tft Threshold Voltage Shift and Ir-Drop on the Power Line for Amoled Displays

The Analysis Of Vertical Cross Talk On Top Emission Amoled

P‐127: Improving the Driving Voltage Stability of Tandem Red OLED

A 6T2C Pixel Circuit Compensating for TFT Electrical Characteristics Variations, Voltage Drop, and OLED Degradation