Abstract:Preparation process and microstructure of CF/CNTs reinforcements and mechanical properties of their composites. Chemical vapor deposition (CVD) method was performed to grow carbon nanotubes (CNTs) on oxidized carbon fiber (CF). First, CF was oxidized by a simple and gentle way to increase the number of active groups and the optimal treatment time was determined. Then, effects of catalyst concentration and growth time on morphologies and loading amount of CNTs, the properties of CF/CNTs reinforcements, and the interlayer properties of CF/CNTs composites were explored. When the catalyst concentration and growth time were controlled at a reasonable level, CNTs can be uniformly grown on the CF surface. The interlaminar shear strength (ILSS) was characterized and the fracture surfaces of CF/CNTs composites were observed. The results demonstrated that when the catalyst precursor was kept at 0.05 mol/L and the growth time was controlled at 10 min, CNTs had the best strength effect and the ILSS increased by 30.25% compared to that of composites without CNTs. The fracture surface showed that CNTs can penetrate the matrix at the interface and enhance the interface through mechanical interlocking effect. The CNTs‐induced interphase allows the stress inside the composites to propagate continuously between resin and fibers, thereby heightening the load carrying capacity. Highlights A simple and gentle way was performed to activate CF without strength reduction. The influence mechanism of various parameters was revealed in detail. The mechanism of CNTs enhancing the interface was revealed.

Effect of Electrochemical Anodization and Growth Time on Continuous Growth of Carbon Nanotubes on Carbon Fiber Surface

One‐step in‐situ growth of CNTs on oxidized carbon fiber: Effects of catalyst concentration and growth time on mechanical properties of carbon fiber

Catalyst Optimization and Reduction Condition of Continuous Growth of Carbon Nanotubes on Carbon Fiber Surface

Optimization of Electrical Intensity for Electrochemical Anodic Oxidation to Modify the Surface of Carbon Fibers and Preparation of Carbon Nanotubes/Carbon Fiber Multi-Scale Reinforcements

Continuous Growth of Carbon Nanotubes on Carbon Fiber Surface by Chemical Vapor Deposition Catalyzed by Cobalt with Thiourea

Influencing factors and growth kinetics analysis of carbon nanotube growth on the surface of continuous fibers

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Process Optimization of Continuous Preparation of Carbon Nanotubes/carbon Fiber Multi-Scale Reinforcement

Non-destructive and controllable catalyst deposition of in situ growing carbon nanotubes onto the carbon fibre fabric

In‐situ Growth of Bamboo‐like Carbon Nanotubes from Cu Catalyst on Continuous Carbon Fibre for Interfacial Enhancement

In-situ growth of CNT/CNF on carbon fiber surface and growth mechanism

Carbon Nanotube Growth on the Surface of Carbon Fibers by CVD

In situ growth of CNTs on carbon fiber by chemical vapor deposition

Surface Modification of Short Carbon Fibers with Carbon Nanotubes to Reinforce Epoxy Matrix Composites.

Influencing Mechanism Of Electrochemical Treatment On Preparation Of Cnts-Grafted On Carbon Fibers

Continuous and Scalable Fabrication and Multifunctional Properties of Carbon Nanotube Aerogels from the Floating Catalyst Method

Influence of Carbon Nanotubes Coatings Onto Carbon Fiber by Oxidative Treatments Combined with Electrophoretic Deposition on Interfacial Properties of Carbon Fiber Composite

Carbon Nanotubes Grown on Electrospun Polyacrylonitrile-Based Carbon Nanofibers Via Chemical Vapor Deposition

Analyses of Reinforcing Effects of in Situ Grown CNTs on Carbon Fibre Fabric/epoxy Composites at Micro- and Macroscale

In-situ Growth of Carbon Nano-tubes/Carbon Nano-fibers(CNTs/CNFs) on the Surface of Carbon Fibers and its Microstructure Investigation

Performance Improvement Of Continuous Carbon Nanotube Fibers By Acid Treatment