Abstract:Protein-rich (58.50%) Chlorella sp. was hydrothermally pretreated at 175 °C to remove part of N, and the obtained solid residue (ChSR) was then co-pyrolyzed with polypropylene (PP) to reduce O content and improve bio-oil quality. About 48.25% of N was enriched into the aqueous phase during hydrothermal pretreatment (HTP) process, and about 15.70% of bio-oil with low N content (3.45%) was obtained. Compared with that of raw sample, the structure of ChSR was further aromatized as revealed by 13C NMR analysis. The interaction between ChSR and PP was deeply investigated with the help of online TG-FTIR-MS and Py-GC/MS. The co-pyrolysis process of ChSR-PP blends was generally divided into two thermal decomposition stages. The first stage (150–400 °C) was mainly associated with decomposition of ChSR, while the second stage (400–550 °C) was the results of combination of thermal degradations of ChSR and PP, with the primary contribution from the degradation of PP. The addition of PP accelerated pyrolysis of ChSR and inhibited the release of C2H5O+/COOH+ and NH3 but promoted CO2 releasing at the first stage. However, ChSR delayed the pyrolysis of PP and prohibited release of H2 and light hydrocarbons (i.e., CH4, C2H2, C2H6, C3H7, and so on) from PP at the second stage. Kinetic analysis based on the Flynn-Wall-Ozawa (FWO) method revealed that the average activation energy (E) of the blends at the two decomposition stages were 159.10–164.12 kJ/kg and 194.20–219.86 kJ/kg, respectively. Results of Py-GC/MS indicated that, the synergistic effect between ChSR and PP significantly enhanced the formation of hydrocarbons (i.e., cyclohexane derivatives and 2,4-Dimethyl-1-heptene), and the interaction achieved maximum when the ratio of ChSR:PP was 80:20. The yields of O-containing compounds (alcohols, and phenols) and BTEXs (Benzene series) were decreased. It should be noted that both the amounts and kinds of N-heterocyclic compounds were decreased. Finally, the possible mechanism on interaction between ChSR and PP was also proposed. This work will provide useful information on better utilization of high-protein microalgae.

Microalgae Co-Pyrolysis with Waste Plastics to Prepare Low-O/n and Hydrocarbon-Rich Liquid Oil

Co-pyrolysis of microalgae and plastic: Characteristics and interaction effects

Co-pyrolysis of microalgae with low-density polyethylene (LDPE) for deoxygenation and denitrification

Influence of waste plastic on pyrolysis of low-lipid microalgae: A study on thermokinetics, behaviors, evolved gas characteristics, and products distribution

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Synergistic effects of catalytic co-pyrolysis of macroalgae with waste plastics

Screening and Optimization of Microalgae Biomass and Plastic Material Coprocessing by Hydrothermal Liquefaction

Characteristics and Synergistic Effects of Co-Pyrolysis of Microalgae with Polypropylene

Thermal behaviour and kinetic study of co-pyrolysis of microalgae with different plastics

Preparation of low-nitrogen and high-quality bio-oil from microalgae catalytic pyrolysis with zeolites and activated carbon

Catalytic Pyrolysis of Microalgae for Production of Aromatics and Ammonia

Co-pyrolysis of lignocellulosic biomass and microalgae: Products characteristics and interaction effect.

Co-pyrolysis of microalgae and other biomass wastes for the production of high-quality bio-oil: Progress and prospective

Co-pyrolysis of Hydrothermally Pre-Treated Microalgae Residue and Polymeric Waste (plastic/tires): Comparative and Dynamic Analyses of Pyrolytic Behaviors, Kinetics, Chars, Oils, and In-Situ Gas Emissions

Catalytic co-pyrolysis and kinetic study of microalgae biomass with solid waste feedstock for sustainable biofuel production

Synergistic effects on co-pyrolysis of low-temperature hydrothermally pretreated high-protein microalgae and polypropylene

Fueling sustainability: Co-pyrolysis of microalgae biomass and waste plastics for renewable energy and waste mitigation

Production of aromatic hydrocarbons by catalytic co-pyrolysis of microalgae and polypropylene using HZSM-5

Co-pyrolysis of de-oiled microalgal biomass residue and waste tires: Deeper insights from thermal kinetics, behaviors, drivers, bio-oils, bio-chars, and in-situ evolved gases analyses

Microwave vacuum co-pyrolysis of waste plastic and seaweeds for enhanced crude bio-oil recovery: Experimental and feasibility study towards industrialization