Abstract:Abstract Esterification of acetic acid and methanol to produce methyl acetate and water has been studied in a continuous packed bed catalytic reactive distillation column. Indion 180, an ion-exchange resin solid catalyst has loaded in an equivalent Katapak-S into the reactive section of the column. The experiments were conducted under different operating conditions of reboiler temperature, total feed flow rate of the reactants, methanol to acetic acid mole ratio, feed location of acetic acid and methanol with respect to reactive section, reflux ratio and catalyst amount to investigate the composition of distillate and reboiler respectively. The maximum methyl acetate composition and acetic acid conversion is obtained at reboiler temperature of 80 °C, reflux ratio of 2, total feed flow rate of 16.3 g/min, catalyst loading of 60 g and mole ratio of methanol to acetic acid is 1. From the experimental investigations, it is found that the composition of the methyl acetate in the distillate is 95% by mole at an optimized experimental condition. The experimental data has been compared with equilibrium and non-equilibrium model predictions and found that non-equilibrium model is able to predict the experimental data reasonably good. The calculated error from equilibrium model relative to experimental data is 4.71% and rate based model relative to experimental data is 0.61%. It is observed that the error is less in rate based model compared to equilibrium model.

Process Performance and Kinetics of the Esterification of Diketene to Methyl Acetoacetate in Helical Continuous-Flow Microreactors

Modeling and Analysis of New Reactor Concepts for Poly(ethylene Terephthalate) Esterification Process

Study on Kinetics of Methyl Esterification of Alkali Weight-Reduction Wastewater Residue

Kinetics and Modeling of Melt Polycondensation for Synthesis of Poly[(butylene Succinate)‐co‐(butylene Terephthalate)], 1 – Esterification

A Seven Lumped Kinetic Model for Industrial Catalyst in DMTO Process

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Direct Esterification in Helical Continuous-Flow Microreactors under an Aqueous Environment: Optimization, Reaction Kinetics, and Process Intensification

Kinetic Perspective on Methanol to Propylene Process Via HZSM-5 Catalyst: Balancing Between Reaction and Diffusion

Aminolysis of Ethyl Acetate in Continuous Flow and Its Reaction Kinetics

Mechanism and Kinetics of Hexamethylolmelamine Methyl Etherification

Experimental and simulation studies of a continuous reactive distillation for an esterification process

Microwave-assisted continuous reactive distillation process for preparation of ethyl acetate

Kinetic Verification and Comsol Modeling of the Diels-Alder Reaction of Conjugated Pentadiene with Maleic Anhydride in a Continuous Flow Capillary Reactor

Macroscopic Kinetics Modelling of Liquid–liquid Reaction System: Epoxidation of Fatty Acid Methyl Esters

Hydrolysis of Methyl Acetate and Methanol Mixture in a Catalytic Distillation Column

Microreactor technology for synthesis of ethyl methyl oxalate from diethyl oxalate with methanol and its kinectics

Transesterification of Methyl Oleate for Sustainable Production of Biolubricant: Process Optimization and Kinetic Study

Epoxidation of Fatty Acid Methyle Ester with hydrodynamic cavitation technology

Fatty Acid Methyl Ester Synthesis through Transesterification of Palm Oil with Methanol in Microchannels: Flow Pattern and Reaction Kinetics

Reaction Thermodynamic and Kinetics for Esterification of 1-Methoxy-2-Propanol and Acetic Acid over Ion-Exchange Resin

Apparent Kinetics and Thermodynamics Study of Methyl Ethyl Ketone Peroxide in Efficient Continuous-Flow Microreaction System and Its Kiloton Pilot Plant