Abstract:In ducts with varying cross-sectional area and sustaining a subsonic non-isentropic mean flow, the axially varying flow conditions affect the acoustic energy balance of the system. This is significant in understanding and controlling thermo-acoustic phenomena, particularly in combustors. This work aims at quantifying the acoustic energy change in such configurations, using the acoustic absorption coefficient, $\Delta$. The acoustic response of the duct to acoustic forcing is determined using an analytical model, neglecting the effect of entropy fluctuations on the acoustic field, and subsequently, $\Delta$ is estimated. The model predictions of $\Delta$ are validated using a linearised Euler equations (LEEs) solver. The model was found to be accurate for Mach numbers below $0.25$, provided the lower frequency limit set by the analytical solution is satisfied. For conically varying area ducts with linear mean temperature gradient, it was observed that $\Delta$ showed very little dependence on frequency, and that the absolute value of $\Delta$ tended to be maximised when the upstream boundary was anechoic rather than non-anechoic. More importantly, $\Delta$ was also observed to show stronger dependence on the mean temperature gradient than area gradient variation for such configurations. Further parametric and optimisation studies for $\Delta$ revealed a crucial finding that a positive mean temperature gradient, representing a heated duct caused acoustic energy absorption. Similarly, a negative mean temperature gradient, representing a cooled duct caused acoustic energy generation -- a key result of this analysis. This behaviour was shown to be consistent with a simplified analysis of the acoustic energy balance. Based on this finding, a linearly proportional reduction in acoustic energy generation was achieved by changing the mean temperature gradient.

Three-Dimensional Analytical Solutions for Acoustic Transverse Modes in a Cylindrical Duct with Axial Temperature Gradient and Non-Zero Mach Number

Basic Analysis on a Thermoacoustic Engine with Gas and Liquid

Thermo-mechanical Performance of Layered Transversely Isotropic Media Around a Cylindrical/tubular Heat Source

Three-dimensional Semi-Analytical Solutions for the Transient Response of Functionally Graded Material Cylindrical Panels with Various Boundary Conditions

Thermoacoustic Model For Time-Averaged Flowing Streaming Within Parallel Plate And Cylindrical Tube Subjected To Oscillating Flow

Numerical Simulation of Nonlinear Phenomena in a Standing-Wave Thermoacoustic Engine with Gas-Liquid Coupling Oscillation

Performances Analysis of Asymmetric Minimum Length Nozzles

Three-Dimensional Acoustic Analysis of a Rectangular Duct with Gradient Cross-Sections in High-Speed Trains: A Theoretical Derivation

Acoustic absorption and generation in ducts of smoothly varying area sustaining a mean flow and a mean temperature gradient

Biglobal linear stability analysis of a ducted 2D premixed flame: intrinsic thermoacoustic mode and role of exceptional point

LAMINAR FLOW AND HEAT TRANSFER IN THE DEVELOPING REGION OF HELICAL SQUARE DUCTS

Theoretical analysis of sound propagation and entropy generation across a distributed steady heat source

Analytical Characterization of Low-Frequency Instabilities in a Simple Duct System

Numerical investigation of azimuthal thermoacoustic instability in a gas turbine model combustor

Large eddy simulation and low-order modelling of azimuthal thermoacoustic instability in a gas turbine model annular combustor

Numerical Analysis of High Frequency Transverse Instabilities in a Can-Type Combustor

A 2D Low-Order Thermoacoustic Network Model of Annular Combustor with Baffles in the Plenum

Numerical simulation of sound attenuation in an acoustically lined duct in high-temperature air flows

Theoretical Study and Numerical Validation of Sound Radiation from Coaxial Annular Duct

A solution for the quasi-one-dimensional linearised Euler equations with heat transfer

1D solutions for compressible two-phase flows in a heated and cooled duct: mechanical equilibrium