Abstract:Polycrystalline Ni of two purities (99.967% (4N) and 99.5% (2N)) was deformed to an ultra-high strain of εvM=100 (εvM, von Mises strain) by high pressure torsion at room temperature. The 4N and 2N samples at this strain are nanostructured with an average boundary spacing of ∼100nm, a high density of dislocations and a large fraction of high angle boundaries (>15°) of 0.68–0.74, as determined by transmission electron microscopy, and 0.8–0.83, as determined by electron backscattering diffraction. The deformed samples were annealed isochronally for 1h at temperatures from 100 to 600°C, and the evolution of the structural parameters (boundary spacing, average boundary misorientation angle and the fraction of high angle boundaries), crystallographic texture and hardness were determined. Based on microstructural parameters the energy stored in the deformed state was estimated to be 14MPa and 24MPa for 4N Ni and 2N Ni, respectively. The isochronal annealing leads to a drop in hardness in three stages: a relatively small decrease at low temperatures (recovery), followed by a rapid decrease at intermediate temperatures (recrystallization) and a slow decrease at high temperature (grain growth). Both recovery and recrystallization of the 2N Ni are strongly retarded by the presence of impurities reducing the mobility of boundaries. In the recrystallization stage, changes in hardness, microstructure and texture show that the 4N Ni recrystallizes discontinuously, in spite of a large fraction of high angle boundaries in the deformed state. This finding contradicts previous experiments and theory, which suggest that recrystallization is continuous when the fraction of high angle boundaries is high. In the 2N Ni, the observations suggest that some structural coarsening (continuous recrystallization) may take place simultaneously with discontinuous recrystallization. The findings emphasize the importance of alloying, which can delay the process of recovery and recrystallization and thereby enable tailoring of the microstructure and properties through an optimized annealing treatment.

Tailoring Hydrogen Embrittlement Resistance of Pure Ni by Grain Boundary Engineering

Energetics and kinetics of hydrogen at the grain boundary of the Ni alloys: A first-principles study

Hydrogen Embrittlement Behavior of Pure Ni and Ni–20Cr Alloy with Different Grain Sizes

Atomistic investigation of hydrogen induced decohesion of Ni grain boundaries

Hydrogen-prompted heterogeneous development of dislocation structure in Ni

Hydrogen Embrittlement Prompt Fracture in Ni-based Single Crystal Superalloy

Interaction Between Recrystallization and Helium Behavior in Cold-Rolled Nickel

Multi-scale structural heterogeneity promoting hydrogen embrittlement in additively manufactured pure nickel

Study on the Hydrogen Embrittlement of Nanograined Materials with Different Grain Sizes by Atomistic Simulation

Mechanism of Hydrogen Embrittlement in a Gamma-Prime Phase Strengthened Fe–Ni Based Austenitic Alloy

Effects of Alloy Compositions on Hydrogen Behaviors at a Nickel Grain Boundary and a Coherent Twin Boundary

Tailoring the Thermal Stability of Nanocrystalline Ni Alloy by Thick Grain Boundaries

The hydrogen embrittlement of pure Ni fabricated by additive manufacturing

The effect of trapped hydrogen on mechanical behavior of Ni3(Si,Ti) intermetallic compound

Influence of hydrogen behaviors on tensile properties of equiatomic FeCrNiMnCo high-entropy alloy

Enhancing the hydrogen embrittlement resistance of 304 steel by grain boundary engineering

Effects of grain boundary character distribution on hydrogen-induced cracks initiation and propagation at different strain rates in a nickel-saving and high-nitrogen austenitic stainless steel

Thermal Behavior of Ni (99.967% and 99.5% Purity) Deformed to an Ultra-High Strain by High Pressure Torsion

Grain Boundary Feature and Its Effect on Mechanical Property of Ni 690 Alloy Layer Produced by GTAW

Defeating Hydrogen-Induced Grain-Boundary Embrittlement Via Triggering Unusual Interfacial Segregation in FeCrCoNi-type High-Entropy Alloys

Hydrogen-induced transgranular to intergranular fracture transition in bi-crystalline nickel