Abstract:<p>Porous hydrogel, as a high-efficiency adsorbent for heavy metals, suffers the drawbacks of the use of expensive and toxic reagents during the process of preparation, further limiting its application ranges. Besides, the heavy metals couldn't be transformed into nontoxic species, which leads to the environmental pollution risk. Herein, a three-dimensionally (3D) structured Cu–Fe embedded cross-linked cellulose hydrogel (nFeCu-CH) was innovatively fabricated by a novel self-assembly and in-situ reduction method, which exhibited exceptionally enhanced adsorption-reduction property towards Cr(VI) wastewater. The results of degradation experiment exhibited that the removal reaction followed Langmuir-Hinshelwood first order kinetic model and the degradation rate constant decreased with solution pH and initial Cr(VI) concentration, while increased with nFeCu-CH dosage and temperature. Regeneration studies demonstrated that more than 88% of Cr(VI) was removed by nFeCu-CH even after five times of cycling. nFeCu-CH exhibited excellent reductive activity, which had a close connection with the superiority of 3D crosslinked architectures and bimetallic synergistic effect. And 97.1% of Cr(VI) could be removed when nFeCu-CH dosage was 9.5 g/L, pH was 5, initial concentration of Cr(VI) was 20 mg/L and temperature was 303 K. Combined with cellulose hydrogel not only could provide additional active sites, but also could restrain the crystallite growth and agglomeration of nano-metallic particles, leading to the promotion of Cr(VI) removal. In addition, coating with Cu facilitated the generation and transformation of electrons according to the continuous redox cycles of Fe(III)/Fe(II) and Cu(II)/Cu(I), leading to the further improvement of the reductivity of nFeCu-CH. Multiple interaction mechanisms including adsorption, reduction and co-precipitation between nFeCu-CH and Cr(VI) were realized. The current work suggested that nFeCu-CH with highly reactive sites, excellent stability and recyclability was considered as an potential material for remediation of Cr(VI) contaminated wastewater.</p>

Design of Cryogel Based CNTs-anchored Polyacrylonitrile Honeycomb Film with Ultra-High S-NZVI Incorporation for Enhanced Synergistic Reduction of Cr(VI).

Nanocrystalline Celluloses-Assisted Preparation of Hierarchical Carbon Monoliths for Hexavalent Chromium Removal.

Synergy of Carboxymethyl Cellulose Stabilized Nanoscale Zero-Valent Iron and Penicillium Oxalicum SL2 to Remediate Cr(VI) Contaminated Site Soil

Formulation of NZVI-supported lactic acid/PAN membrane with glutathione for enhanced dynamic Cr(VI) removal

Facile Improvement of Nanoscale Zero-Valent Iron Activity with Exceptional Stability for Reduction of Cr(VI)

Nanocellulose encapsulated nZVI@UiO-66-NH 2 aerogel for high-efficiency p-chloronitrobenzene removal with selective reduction

Efficient Hexavalent Chromium Removal by Nano-Cerium Oxide Functionalized Biochar: Insight into the Role of Reduction

Construction of controlled hyper-crosslinked nanofibrous tubes for Cr(VI) removal: Response surface, kinetics, and isotherm

Highly Efficient Immobilization of NZVI Onto Bio-Inspired Reagents Functionalized Polyacrylonitrile Membrane for Cr(VI) Reduction.

Copolymer-Templated Synthesis of Nitrogen-Doped Mesoporous Carbons for Enhanced Adsorption of Hexavalent Chromium and Uranium

Efficient Chromium (VI) Removal with Zirconium Oxide-Carbon Nanotubes via Filtration-Steam Hydrolysis

Fe–Ni/MWCNTs Nano-Composites for Hexavalent Chromium Reduction in Aqueous Environment

Preparation, characterization and performance of an electrospun carbon nanofiber mat applied in hexavalent chromium removal from aqueous solution

Removal of Chromium (VI) by a Self-Regenerating and Metal Free G-C3n4/graphene Hydrogel System Via the Synergy of Adsorption and Photo-Catalysis under Visible Light

Effective Strategy to Fabricate ZIF-8@ZIF-8/polyacrylonitrile Nanofibers with High Loading Efficiency and Improved Removing of Cr(VI)

Integration of galvanic reactions and engineered nanoconfinement in iron-copper nanocomposites for highly-efficient remediation of Cr(VI)-contaminated acidic/alkaline water

Facile synthesis of ZIF-8 incorporated electrospun PAN/PEI nanofibrous composite membrane for efficient Cr(VI) adsorption from water

An ultralight and flexible nanofibrillated cellulose/chitosan aerogel for efficient chromium removal: Adsorption-reduction process and mechanism

In Situ Carbothermal Synthesis of Nanoscale Zero‐Valent Iron Functionalized Porous Carbon from Metal–Organic Frameworks for Efficient Detoxification of Chromium(VI)

A novel preparation of S-nZVI and its high efficient removal of Cr(VI) in aqueous solution

Cu–Fe embedded cross-linked 3D hydrogel for enhanced reductive removal of Cr(VI): Characterization, performance, and mechanisms