Abstract:Proper alloying magnesium with element scandium (Sc) could transform its microstructure from alpha phase with hexagonal closed-packed (hcp) structure into beta phase with body-cubic centered (bcc) structure. In the present work, the Mg-30 wt% Sc alloy with single alpha phase, dual phases (alpha + beta) or beta phase microstructure were developed by altering the heat-treatment routines and their suitability for usage within bone was comprehensively investigated. The beta phased Mg-30 wt% Sc alloy showed the best mechanical performance with ultimate compressive strength of 603 +/- 39 MPa and compressive strain of 31 +/- 3%. In vitro degradation test showed that element scandium could effectively incorporate into the surface corrosion product layer, form a double-layered structure, and further protect the alloy matrix. No cytotoxic effect was observed for both single alpha phased and beta phased Mg-30 wt% Sc alloys on MC3T3 cell line. Moreover, the beta phased Mg-30 wt%Sc alloy displayed acceptable corrosion resistance in vivo (0.06 mm y(-1)) and maintained mechanical integrity up to 24 weeks. The degradation process did not significantly influence the hematology indexes of inflammation, hepatic or renal functions. The bone-implant contact ratio of 75 +/- 10% after 24 weeks implied satisfactory integration between beta phased Mg-30 wt%Sc alloy and the surrounding bone. These findings indicate a potential usage of the bcc-structured Mg-Sc alloy within bone and might provide a new strategy for future biomedical magnesium alloy design. Statement of Significance Scandium is the only rare earth element that can transform the matrix of magnesium alloy into bcc structure, and Mg-30 wt%Sc alloy had been recently reported to exhibit shape memory effect. The aim of the present work is to study the feasibility of Mg-30 wt%Sc alloy with different constitutional phases (single alpha phase, single beta phase or dual phases (alpha+beta) as biodegradable orthopedic implant by in vitro and in vivo testings. Our findings showed that beta phased Mg-30 wt%Sc alloy which is of bcc structure exhibited improved strength and superior in vivo degradation performance (0.06 mm y(-1)). No cytotoxicity and systematic toxicity were shown for beta phased Mg-30 wt%Sc alloy on MC3T3 cell model and rat organisms. Moreover, good osseointegration, limited hydrogen gas release and maintained mechanical integrity were observed after 24 weeks' implantation into the rat femur bone. (C) 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Influence of Sc on the microstructure, degradation behavior, biocompatibility in vitro and mechanical property of Mg-2Zn-0.2Zr alloy

Mechanical, corrosion, and biocompatibility properties of Mg-Zr-Sr-Sc alloys for biodegradable implant applications

Influence of Sc on microstructure and mechanical properties of Al–Si–Mg–Cu–Zr alloy

Effect of Sc microalloying on microstructure evolution and mechanical properties of extruded Al-Zn-Mg-Cu alloys

Impact of scandium and terbium on the mechanical properties, corrosion behavior, and biocompatibility of biodegradable Mg-Zn-Zr-Mn alloys

Influence of Sc Content on the Microstructure and Mechanical Properties of Cast Al-2Li-2Cu-0.5Mg-0.2Zr Alloy

Microstructures and Properties of Biomedical Mg-Zn-Sn-Zr Rolled Alloys

Effect of Sc/Zr ratio on the microstructure and mechanical properties of new type of Al–Zn–Mg–Sc–Zr alloys

Effects of Mg and Sc Additions on the Microstructure, Mechanical Properties, and Thermal Stability of a Cast Al-2Li-2Cu-0.2Zr Alloy after Thermal Exposure

Microstructures and Mechanical Properties of Mg-Sc Binary Alloy

Improving in vitro and in vivo corrosion resistance and biocompatibility of Mg-1Zn-1Sn alloys by microalloying with Sr

Influence of Sc and Zr additions on microstructure and properties evolution of Al–Zn–Mg alloy

In Vitro and in Vivo Studies of Mg-30Sc Alloys with Different Phase Structure for Potential Usage Within Bone.

Effects of Sc Addition on the Microstructure and Mechanical Properties of Cast Al-3Li-1.5Cu-0.15Zr Alloy

Evaluation of As‐extruded Ternary Zn–Mg–Zr Alloys for Biomedical Implantation Material: in Vitro and in Vivo Behavior

Influence of minor Sc additions on grain refinement and microstructure characteristics of a high Zn-containing Al-Zn-Mg-Cu-Zr alloy

Microstructure and Mechanical Properties of Casting Al-3Li-2Mg-1Zn-0.1Zr Alloys Modified by Sc Additions

Microstructure, Mechanical Properties, in Vitro Degradation and Cytotoxicity Evaluations of Mg–1.5Y–1.2Zn–0.44Zr Alloys for Biodegradable Metallic Implants

In Vitro Degradation Performance and Biological Response of a Mg–Zn–Zr Alloy

Microstructure, Mechanical Properties, Corrosion Behavior and Biocompatibility of As-Extruded Biodegradable Mg–3Sn–1Zn–0.5Mn Alloy

Effect of Sc and Zr on Microstructure and Mechanical Properties of As‐Cast Al–Li–Cu Alloys