Abstract:Abstract.A general method is presented for the rigorous solution of Eshelby’s problem concerned with an arbitrary shaped inclusion embedded within one of two dissimilar elastic half-planes in plane elasticity. The bonding between the half-planes is considered to be imperfect with the assumption that the interface imperfections are uniform.Using analytic continuation, the basic boundary value problem is reduced to a set of two coupled nonhomogeneous first-order differential equations for two analytic functions defined in the lower half-plane which is free of the thermal inclusion. Using diagonalization, the two coupled differential equations are decoupled into two independent nonhomogeneous first-order differential equations for two newly defined analytic functions. The resulting closed-form solutions are given in terms of the constant imperfect interface parameters and the auxiliary function constructed from the conformal mapping which maps the exterior of the inclusion onto the exterior of the unit circle.The method is illustrated using several examples of an imperfect interface. In particular, when the same degree of imperfection is realized in both the normal and tangential directions between the two half-planes, a thermal inclusion of arbitrary shape in the upper half-plane does not cause any mean stress to develop in the lower half-plane. Alternatively, when the imperfect interface parameters are not equal, then a nonzero mean stress will be induced in the lower half-plane by the thermal inclusion of arbitrary shape in the upper half-plane. Detailed results are presented for the mean stress and the interfacial normal and shear stresses caused by a circular and elliptical thermal inclusion, respectively. Results from these calculations reveal that the imperfect bonding condition has a significant effect on the internal stress field induced within the inclusion as well as on the interfacial normal and shear stresses existing between the two half-planes especially when the inclusion is near the imperfect interface.

Static and Transient Thermal Conductions and Associated Thermal Stresses in an Elastic Strip with a Rigid Line Inclusion

General Solution for Inhomogeneous Line Inclusion with Non-Uniform Eigenstrain

Transient Mode-Iii Problem of the Elastic Matrix with a Line Inclusion

THERMAL STRESSES IN JOINED SEMI-INFINITE SOLIDS

Effect of a thin surface coating layer on thermal stresses within an elastic half-plane

Three-phase Elliptical Inclusions with an Internal Stress Field of Linear Form

Anti-plane Pull-out of a Rigid Line Inclusion from an Elastic Medium

Three-phase inclusions of arbitrary shape with internal uniform hydrostatic thermal stresses

A Rigid Line Inclusion in a Nonlocal Elastic Medium – Mode I Deformation

Study on the Crack–inclusion Interaction with Coupled Mechanical and Thermal Strains

Elastic fields in two imperfectly bonded half-planes with a thermal inclusion of arbitrary shape

Analysis of Inclusion in Thermoelectric Materials: the Thermal Stress Field and the Effect of Inclusion on Thermoelectric Properties

Thermal-Mechanical Finite Element Analysis Of The Rolling-Sliding Contact With Inclusion

Thermal-stress Analysis for a Strip of Finite Width Containing a Stack of Edge Cracks

Uniform Hydrostatic Thermal Stress Fields Inside Two Interacting Inclusions of Irregular Shape and Related Problem

Thermal shock fracture in a cracked strip: Incorporating convective heat transfer between lateral surfaces and ambient environment

Solutions to Eshelby'S Problems of Non-Elliptical Thermal Inclusions and Cylindrical Elastic Inclusions of Non-Elliptical Cross Section

Multiple Elastic or Rigid Line Inclusions in a Multilayered Orthotropic Solid

Three-Phase Inclusions of Arbitrary Shape with Internal Uniform Hydrostatic Stresses in Finite Elasticity

On the Interfacial Stress of the Orthotropic Solid Containing Elliptic Inclusion

An Isoparametric Inclusion Model for Determining the Thermo-Elastic Fields Produced by Varying Eigen-temperature Gradients