Abstract:Previous studies on laterally loaded piles in clay have mainly focused on flexible and rigid piles. Little attention has been paid to semi-rigid piles (whose pile–soil stiffness lies somewhere between those of rigid and flexible piles), which may behave as either flexible piles or rigid piles, depending on the change in soil stiffness during cycling. This study aims to understand the cyclic lateral response of a repeatedly loaded semi-rigid pile in soft clay and the failure mechanisms of the soil around the pile, through a series of centrifuge model tests and three-dimensional finite element analyses using an advanced hypoplastic clay model. Numerical parametric studies were also performed to investigate the evolution of soil flow mechanisms with increasing pile rigidity. It is revealed that the semi-rigid pile behaved as if it were a flexible pile (i.e., flexural deformation dominated) during the first few cycles, but tended to behave like a rigid pile (i.e., rotational movement prevailed) during subsequent cycles, which progressively softened the surrounding soil. As a result, the mechanisms of soil flow around the semi-rigid pile exhibited an intermediate behaviour combining the mechanisms of both flexible and rigid piles. Three distinctive mechanisms were identified: a wedge-type mechanism near the surface, a full-flow mechanism (within the transverse sections) near the middle of the pile, and a rotational soil flow mechanism (in the vertical symmetrical plane of the pile) near the lower half of the pile. By ignoring the rotational soil flow mechanism, which has a much lower resistance than the full-flow mechanism, the American Petroleum Institute code (published in 2007) underestimated the cyclic bending moment and the lateral pile displacement by 10% and 69%, respectively. Application of jet grouting around the semi-rigid pile at shallow depth significantly altered the soil flow mechanism (i.e., it was a solely wedge-type mechanism around the grouted zone).

A Lateral Soil Resistance Model for XCC Pile in Soft Clay Considering the Effect of the Geometry of Cross Section

Limiting Force Profile for Laterally Loaded Piles in Undrained Clay

An Improved Model for the Horizontal Dynamic Response of Piles in Saturated Soil

Centrifuge Modelling of Lateral Loading Behaviour of a “Semi-Rigid” Mono-pile in Soft Clay

Analytical Elastoplastic Solutions of Laterally Loaded Long Piles

Influence of the Penetration of Adjacent X-section Cast-in-place Concrete (XCC) Pile on the Existing XCC Pile in Sand

Elastoplastic Analytical Computation of Long Piles under Combined Lateral Loads

Experimental Study on the Development of Surrounding Soil Stress During XCC Pile Installation in Sand

Behavior Analysis of Laterally Loaded Single Pile under Large Deflection

Cyclic Lateral Response and Failure Mechanisms of Semi-Rigid Pile in Soft Clay: Centrifuge Tests and Numerical Modelling

Elastoplastic Solutions for Single Piles under Combined Vertical and Lateral Loads

Analysis method for pile groups subjected to lateral and torsional loads

A Bounding-Surface-based Cyclic "P-Y Plus M-θ" Model for Unified Description of Laterally Loaded Piles with Different Failure Modes in Clay

Elastic Solutions for Partially Embedded Single Piles Subjected to Simultaneous Axial and Lateral Loading

Analytical Approach to Axially Loaded Concrete Core-Cement Soil Composite Pile

A Multi-Axial Bounding Surface P-Y Model with Application in Analyzing Pile Responses under Multi-Directional Lateral Cycling

Lateral Dynamic Responses of Coastal Group Piles Considering Pile‒water‒soil Interactions

Semi-analytical Solutions for Single Piles under Lateral Loads Based on Subgrade Reaction Method

Model tests on characteristics of ocean and offshore elevated piles with large lateral deflection

Nonlinear analysis of laterally loaded single pile in layered soil based on conical strain wedge model

Lateral Response Analysis of a Large‐Diameter Pile Under Combined Horizontal Dynamic and Axial Static Loads in Nonhomogeneous Soil