Abstract:One of the major applications (40% in Europe) of plastic is packaging, which is often printed to display required information and to deliver an attractive aesthetic for marketing purposes. However, printing ink can cause contamination in the mechanical recycling process. To mitigate this issue, the use of surfactants in an alkaline washing process, known as de-inking, has been employed to remove printing ink and improve the quality of recyclates. Despite the existence of this technology, there are currently no data linking the de-inking efficiency with typical printing ink compositions. Additionally, it is necessary to investigate the de-inking process under the process parameters of existing recycling plants, including temperature, NaOH concentration, and retention time. This study aims to evaluate the performance of commonly used printing inks with different compositions under various washing scenarios for plastic recycling in conjunction with different de-inking detergents containing surfactants or mixtures of surfactants. The results indicate that the pigments applied to the ink have no significant effect on the de-inking process, except for carbon black (PBk 7). Nitrocellulose (NC) binder systems exhibit high de-inkability (over 95%) under the condition of 55 °C and 1 wt.% NaOH. However, crosslinked binder systems can impede the de-inking effect, whether used as a binder system or as an overprint varnish (OPV). The de-inking process requires heating to 55 °C with 1 wt.% NaOH to achieve a substantial effect. Based on the findings in this work, breaking the Van der Waals forces, hydrogen bonds, and covalent bonds between the printing ink and plastic film is an essential step to achieve the de-inking effect. Further research is needed to understand the interaction between surfactants and printing inks, enabling the development of de-inkable printing inks and high-performance surfactants that allow for de-inking with less energy consumption. The surfactant and NaOH have a synergistic effect in cleaning the printing ink. NaOH provides a negative surface charge for the adsorption of the cationic head of the surfactant and can hydrolyze the covalent bonds at higher concentrations (>2 wt.%).

New Inkjet Printer Uses VOC-free Water- based Inks to Print on Packaging Film as a Short-run Printing Solution

Dynamics of Liquid Transfer from Nanoporous Stamps in High-Resolution Flexographic Printing

Development and Application of a New Technology of Using Water-Based Ink for Gravure Printing of Plastic Packaging

Novel Digital Carpet Printing Using Acid Ink

Transparent water-based UV-curable urethane acrylate ink-jet ink

Organic solvent free, high performance and cleaning reactive dye ink using hydroxypropyl methyl cellulose for inkjet printing

High-performance Inkjet Printing Ink: Properties and Application Effects of Vinyl sulfone Reactive Dye-based Inks

Research of Inkjet Printing of Water-Based Inkjet Ink for the Curved Surface

Vat Photopolymerization Bioprinting with a Dynamic Support Bath

Five-Axis Freeform Surface Color Printing Technology Based on Offset Curve Path Planning Method

Novel Waterborne UV-Curable Hyperbranched Polyurethane Acrylate/Silica with Good Printability and Rheological Properties Applicable to Flexographic Ink

Water-Based Additive-Free Chromic Inks for Printing of Flexible Photochromics and Electrochromics

Free-form Surface-Oriented Five-Axis Single-Point Color Printing Technology.

Water-based plastic printing ink and preparation method thereof

Coffee Ring-Free Inkjet Printing Using UV-Curable Quantum Dot-Acrylate Solution for High Resolution Displays

Embedded Extrusion Printing in Yield-Stress-fluid Baths

Pneumatic Conveying Printing Based on Super Hydrophobic Surface

Water-based ink for plastic printing and preparation method thereof

Screening the Impact of Surfactants and Reaction Conditions on the De-Inkability of Different Printing Ink Systems for Plastic Packaging

On‐Demand Picoliter‐Level‐Droplet Inkjet Printing for Micro Fabrication and Functional Applications

Water-based 3D inkjet printing of an oral pharmaceutical dosage form