Abstract:With the development of ultra-precision machining technology, parts with microstructures on the surface are playing an increasingly important role in engineering practice. The scanning interference microscope measurement method is widely used in the measurement of microscopic surface topography. This paper proposes a method of interference microscopy combined with subaperture stitching. The first step is to divide and measure the sub-aperture. There is a partial overlap area between the divided adjacent subapertures. The white light interferometer measures each sub-aperture in turn. The second step is edge feature detection. There are highly steep edge features between the bottom of the groove and the surface of the surface microgroove. The stitching algorithm detects edge features by detecting the slope threshold of the sub-aperture. The third step is to correct the abscissa. Project the detected edge feature data onto the OXY plane to generate a 2D data set. The multi-dimensional motion scanning platform inevitably has motion errors in the measurement process, so the edge characteristic curves of adjacent sub-apertures have obvious lateral displacement in the overlapping area. The lateral displacement and angle of the lateral coordinate of each sub-aperture are corrected by the least square method. The fourth step is the height coordinate correction. The stitching algorithm minimizes the height difference between the corresponding points in the overlapping area, and solves it with a linear least squares problem model. We have completed the measurement of the fringe pattern on the computer-generated hologram (CGH) substrate and the complete topography of the long groove on the 10mm hemisphere. After the sub-aperture global iterative stitching algorithm, there is no stitching trace in the simulation result. For the long groove on the hemisphere, we designed a four-dimensional scanning motion platform and a special fixture to ensure that the long groove on the hemisphere rotates around an axis perpendicular to the geodesic line. The center of the white light interference fringe is always at the center of the long slot aperture.

Width Determination for Deep Grooves in Dark-Field Confocal Microscopy Measurements

Width determination for deep grooves based on avariable point spread function imaging model

Advances of Confocal Microscopy in Three-Dimensional Surface Topography Measurement

A lateral differential confocal microscopy for accurate detection and localization of edge contours

Depth localization of subsurface defects by optical dark-field confocal microscopy

Intrinsic Spatial Shift of Local Focus Metric Curves in Digital Inline Holography for Accurate 3D Morphology Measurement of Irregular Micro-Objects

Width Gauging of Surface Slot Using Laser-Generated Rayleigh Waves

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

Deep-learning-assisted Sidewall Profiling White Light Interferometry System for Accurately Measuring 3D Profiles and Surface Roughness on the Groove Sidewalls of Precision Components.

Rapid Measurement Of A High Step Microstructure With 90 Degrees Steep Sidewall

New Advance In Confocal Microscopy

On-machine Measurement of a Slow Slide Servo Diamond-Machined 3D Microstructure with a Curved Substrate

3D measurement decoupling criterion in optical microscopy

3D Dark-Field Confocal Microscopy for Subsurface Defects Detection.

High-resolution white light scanning stitching measurement of full-surface microstructure

Differential Confocal Microscopy with A Wide Measuring Range Based on Polychromatic Illumination

Axial Peak Extraction in the Measurement of Subsurface Structures with Annular Illumination Confocal Microscopy

Measuring Linewidth For Micro-Components Based On Regular-Reflective Triangulation Measuring Method

A Novel Wafer Defocus Measurement Method for Spot-Scanning Imaging System Using Laser Triangulation

Step-height Measurement by Means of a Dual-Frequency Interferometric Confocal Microscope.

Virtual Double-Slit Differential Dark-Field Chromatic Line Confocal Imaging Technology