Abstract:To investigate mechanical behavior on in & post impact of CFRP tubes varying wall thickness and impactor, low‐velocity impact (LVI), compression‐after‐impact (CAI), and flexure‐after‐impact (FAI) tests were conducted and three main conclusions can be obtained. First, because of the point‐line contact for flat impactor, two peaks are found in the force‐displacement curves. Second, the failure mode of CAI is brittle fracture at the impact circumferential area. Third, FAI strength mainly depends on the no‐impact surface of tubes. With the help of the high‐speed camera and self‐designed fixture, it was investigated that the effects of the impactors in a variety of shapes on the mechanical behavior and failure mode of carbon fiber‐reinforced polymer (CFRP) tubes with a range of inner diameter during the low‐velocity impact (LVI) of four impact energies. Then, the three‐dimensional digital image correlation (3D‐DIC) system was carried out to monitor the damage evolution of the LVI‐damaged specimens under compressive and flexural loading. In addition, the residual compressive and flexural strength of all kinds of cases were compared and discussed. The results show that the increase in wall thickness can improve the LVI, compression‐after‐impact (CAI), and flexure‐after‐impact performance. The failure mode of compression changes to brittle fracture failure at the impact circumferential region. The CAI strength of the specimen damaged by a flat impactor is 23.89% less than that of a hemispherical one, but there is little difference in flexural loading. Highlights Mechanical behavior on in & post LVI of CFRP tubes varying wall thickness and impactor. Due to point‐line contact for flat impactor, two peak forces are in the F‐D curves. LVI property and residual strength are improved with the increase of wall thickness. Compressive failure mode is brittle fracture at the impact circumferential area. Flexure‐after‐impact strength mainly depends on the no‐impact surface of tubes.

Experimental and Numerical Investigation into the Dynamic Impact Responses of CFRP Header Rail

Experimental study on dynamic behavior of CFRP-to-steel interface

Dynamic Behavior of CFRP-Strengthened Reinforced Concrete Beams Without Stirrups under Impact Loading

Numerical Study of CFRP-Bonded Pressure Pipes Subject to Impact Load

Experimental Investigation on Performance of Cantilever CFRP-wrapped Circular RC Columns under Lateral Low-Velocity Impact

Impact Testing of Reinforced Concrete Beams Shear-Strengthened with Fiber-Reinforced Polymer Wraps

Tests for anti-shear failure mechanism of CFRP-strengthened RC Beams without Stirrups under impact loading

Impact responses and residual flexural properties of narrow CFRP laminates

On Crashworthiness and Energy-Absorbing Mechanisms of Thick CFRP Structures for Railway Vehicles

Study on High-Velocity Impact Perforation Performance of CFRP Laminates for Rail Vehicles: Experiment and Simulation

Crashworthiness and Failure Analyses of FRP Composite Tubes under Low Velocity Transverse Impact

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Experimental and theoretical study on the response of the X-frame CFRP sandwich beam under the local impulsive loading

In-plane compression response of woven CFRP composite after low-velocity impact: Modelling and experiment

Experimental and numerical study on the ballistic impact resistance of the CFRP sandwich panel with the X-frame cores

Experimental and numerical studies on bending characteristics of woven CFRP reinforced aluminum thin-walled automotive structures

Numerical and Experimental Investigation on Mechanical Responses of Plain Woven CFRP Composite under Various Loading Cases

Experimental investigation on the low‐velocity impact response and the residual strength of CFRP tubes

Numerical Simulation on Impact Test of CFRP Strengthened Reinforced Concrete Beams

A comparative study on the energy absorption mechanism of aluminum/CFRP hybrid beams under quasi-static and dynamic bending