Abstract:Nano-sized SnO2 powder can be fabricated by the sol-gel method and analyzed by means of XRD, TEM, etc. The results show that the grain size of SnO2 is less than 100nm, in which the sintering temperature has a great influence. When the sintering temperature is lower than 500 degrees C, the grain size has good heat stability, however when the temperature is higher than 500 degrees C, the grain size of SnO2 will grow due to the increase in temperature. The sensor made of this powder has good gas sensing properties and the response and reversion time are 8s and 20s respectively. The optimum working current is 170mA, while the sensor has high sensitivity to some gases, especially CH4. The environment around us, either global or local, is becoming worse due to chemical pollutants and as a consequence of the ever increasing activity of human beings around the world. In the past, major attention has been paid to typical air pollutants which cause a green-house effect, ozone layer destruction, acid rain and so on. Now, the atmosphere contains a variety of artificially produced chemical components, as well as the apprehension of other effects by pollutants which has increased recently. Therefore, it is necessary to analyze and control these gases. Semiconductor detecting methods are an economical and effective way. At present, SnO2, a surface-controlled sensor, is the main type of gas sensing materials used in the world. The use of SnO2 is prompted by the finer grain and the higher surface ratio, the more obvious change of conductance and the higher sensitivity. Compared with traditional materials, nano-sized materials are composed of superfine particles and more atoms in surfaces and boundaries, therefore nano-sized materials off on many excellent properties. Nano-sized materials offer effective prospects in sensing materials field(2). Using nano-sized powder materials will improve the gas sensing properties of SnO2 semiconductors.

SnO2 as a gas sensor in detection of volatile organic compounds: A review

Recent Advances of SnO2-Based Sensors for Detecting Volatile Organic Compounds

Resistive-type VOCs and pollution gases sensor based on SnO2: A review

Porous SnO2 nanospheres as sensitive gas sensors for volatile organic compounds detection.

Gas-sensing Properties of SnO2–TiO2-based Sensor for Volatile Organic Compound Gas and Its Sensing Mechanism

SnO2 Nanostructured Materials Used As Gas Sensors for the Detection of Hazardous and Flammable Gases: A Review

Semiconductor Metal Oxides As Chemoresistive Sensors for Detecting Volatile Organic Compounds

Sensitivity Improvement of Tio2-Doped Sno2 to Volatile Organic Compounds

Gas Sensors Based on SnO2 Nanomaterials toward Hazardous Gases Detection

Snowflake-Shaped ZnO Nanostructures-Based Gas Sensor for Sensitive Detection of Volatile Organic Compounds

Investigation and fabrication of nano-sized SnO2 powder and its gas sensing properties

Synthesis of porous flower-like SnO2/CdSnO3 microstructures with excellent sensing performances for volatile organic compounds

Porous SnO 2 nanoflowers derived from tin sulfide precursors as high performance gas sensors

Xylene Gas Sensing Properties of Hydrothermal Synthesized SnO2-Co3O4 Microstructure

SnO2 mesoporous nanoparticle-based gas sensor for highly sensitive and low concentration formaldehyde detection

Mesoporous SnO2 sensor prepared by carbon nanotubes as template and its sensing properties to indoor air pollutants

Ultrasensitive Formaldehyde Sensor Based on SnO2 with Rich Adsorbed Oxygen Derived from a Metal Organic Framework.

Synthesis of SnO 2 nanoparticles for formaldehyde detection with high sensitivity and good selectivity

Fabrication of ZnO Quantum Dots@sno2 Hollow Nanospheres Hybrid Hierarchical Structures for Effectively Detecting Formaldehyde

Study on the Gas-Sensitive Properties for Formaldehyde Based on SnO2-ZnO Heterostructure in UV Excitation

Mesoporous Sno2 Nanospheres Sensor for Fast Detection of Hcho and Its Application in Safety Detection of Aquatic Products