Abstract:A refractive index sensor based on the thinned and microstructure fiber Bragg grating (ThMs-FBG) was proposed and realized as a chemical sensing. The numerical simulation for the reflectance spectrum of the ThMs-FBG was calculated and the phase shift down-peak could be observed from the reflectance spectrum. Many factors influencing the reflectance spectrum were considered in detail for simulation, including the etched depth, length, and position. The sandwich-solution etching method was utilized to realize the microstructure of the ThMs-FBG, and the photographs of the microstructure were obtained. Experimental results demonstrated that the reflectance spectrum, phase shift down-peak wavelength, and reflected optical intensity of the ThMs-FBG all depended on the surrounding refractive index. However, only the down-peak wavelength of the ThMs-FBG changed with the surrounding temperature. Under the condition that the length and cladding diameter of the ThMs-FBG microstructure were 800 and 14 mum, respectively, and the position of the microstructure of the ThMs-FBG is in the middle of grating region, the refractive index sensitivity of the ThMs-FBG was 0.79 nm/refractive index unit with the wide range of 1.33-1.457 and a high resolution of 1.2 x 10(-3). The temperature sensitivity was 0.0103 nm/ degrees C, which was approximately equal to that of common FBG.

Refractive index sensing performance of stepped-mTFBG fabricated by flexibly-regulating wet etching process

Compact Microfiber Bragg Gratings with High-Index Contrast

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Miniaturized Metal-Dielectric-Hybrid Fiber Tip Grating for Refractive Index Sensing

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Study on spectral and refractive index sensing characteristics of etched excessively tilted fiber gratings

Microchanneled Chirped Fiber Bragg Grating Formed by Femtosecond Laser-Aided Chemical Etching for Refractive Index and Temperature Measurements

Demodulation Method for Tilted Fiber Bragg Grating Refractometer with High Sensitivity

Refractive Index Sensing Based on Higher-Order Mode Reflection of A Microfiber Bragg Grating

High sensitivity refractive index sensor based on tilted fiber Bragg gratings

Femtosecond Laser Line-by-line Tilted Bragg Grating Inscription in Single-Mode Step-Index TOPAS/ZEONEX Polymer Optical Fiber

Highly sensitive fiber Bragg grating refractive index sensors

Tilted Fiber Bragg Grating Inscription in Boron Co-Doped Photosensitive Optical Fiber Using 266 nm Solid State Laser Pulses

Etched multicore fiber Bragg gratings for refractive index sensing with temperature in-line compensation

Design and Characteristics of Refractive Index Sensor Based on Thinned and Microstructure Fiber Bragg Grating

Reflective Optical Fiber Sensors Based on Tilted Fiber Bragg Gratings Fabricated With Femtosecond Laser

Fabrication and Sensing Characteristics of Long-Period Fiber Grating in Capillary Fiber

Compact refractive index sensor based on offset splicing long-period fiber grating

A Refractometer Based on a Micro-Slot in a Fiber Bragg Grating Formed by Chemically Assisted Femtosecond Laser Processing.

Sensitivity-Tunable FBG Interrogation System Utilizing a Mechanically Induced Long Period Fiber Grating

High Sensitivity Refractometer Based on Tapering Two-Mode Fiber Embedded Long-Period Fiber Grating