Abstract:The effects of adding graphene to a polyetherimide matrix at various temperatures on its thermal conductivity were investigated by a series of molecular dynamics simulations within the framework of response surface methodology. In this work, an I‐optimal response surface model was used to systematically investigate the effects of graphene (Gr) content (Factor A; 0–10 wt%), temperature (Factor B; 0–200°C), and Gr layer structure (Factor C; monolayer versus five‐layer) on the thermal conductivities of PEI/Gr nanocomposites, which were determined using reverse non‐equilibrium molecular dynamics (RNEMD) simulation with the Müller‐Plathe algorithm. Based on a reduced quadratic model that was fit to the data, the effect of Factor A on thermal conductivity was found to be more pronounced for the PEI/Gr nanocomposite with the five‐layer Gr structure. Moreover, Factor B had expectedly the largest effect on thermal conductivity, followed by Factor C. However, these two factors were involved in significant interactions with Factor A. Based on numerical optimizations, the predicted thermal conductivities of the PEI/Gr nanocomposites varied from 0.057 (minimum) to 0.174 W m−1 K−1 (maximum). Overall, the maximum thermal conductivity of the PEI/Gr nanocomposite may be obtained at any given temperature in the range of 0–200°C by the addition of multi‐layer Gr (a cheaper alternative to monolayer Gr) at a content of 10 wt%. For example, the addition of 10 wt% five‐layer Gr to PEI at room temperature (25°) results yields an increase in its thermal conductivity of about 30%. Also, going from 0 to 100°C, an increase of about 76% is predicted for the thermal conductivity of the PEI/Gr nanocomposite containing 10 wt% five‐layer Gr. The results of this study shed light on the interactions between the three investigated factors. Highlights Thermal conductivities of polyetherimide/graphene (PEI/Gr) nanocomposites simulated. Graphene (Gr) content, temperature, and Gr layer structure affected the thermal behavior. Response surface methodology (RSM) aided in the identification of factorial interactions. Numerical optimization of the thermal conductivities enabled by a predictive model.

Modeling of Multilayer Coated Polyimide Graphene Nanocomposite Films and Thermal Conductivity

Enhanced in-plane thermal conductivity of polyimide-based composites via in situ interfacial modification of graphene

Synthesis Process Optimization of Polyimide Nanocomposite Multilayer Films, Their Dielectric Properties, and Modeling

The Liquid-Exfoliation of Graphene Assisted with Hyperbranched Polyethylene-G- Polyhedral Oligomeric Silsesquioxane Copolymer and Its Thermal Property in Polydimethylsiloxane Nanocomposite

Mesoscopic modeling and experimental validation of thermal and mechanical properties of polypropylene nanocomposites reinforced by graphene-based fillers

Hierarchically Multifunctional Polyimide Composite Films with Strongly Enhanced Thermal Conductivity

Preparation and characteristics of composite films with functionalized graphene/polyimide

Enhanced Mechanical and Thermal Properties of Polyimide Films Based on Functional Groups-Free Few-Layer Graphene

Synergistic Improvement in Thermal Conductivity of Polyimide Nanocomposite Films Using Boron Nitride Coated Copper Nanoparticles and Nanowires

Pea-Pod-like Carbon Microspheres Encapsulated by Graphene-like Carbon Nitride for Enhanced Thermal Conductivity in Polyimide Films

Multilayer polyimide nanocomposite films synthesis process optimization impact on nanoparticles dispersion and their dielectric performance

Enhanced thermal conductivity of carbon nitride-doped graphene/polyimide composite film via a “deciduous-like” strategy

Imidization-Induced Carbon Nitride Nanosheets Orientation Towards Highly Thermally Conductive Polyimide Film With Superior Flexibility And Electrical Insulation

A systematic molecular dynamics study of the thermal conductivities of polyetherimide/graphene nanocomposites using response surface methodology

Covalent Bond-Assisted Continuous Interface Structure for High Thermal Conductive Polyimide Composite Films

In Situ Fabrication of High Dielectric Constant Composite Films with Good Mechanical and Thermal Properties by Controlled Reduction

Dual covalent bond induced high thermally conductive polyimide composite films based on CNT@CN complex filler

Significantly enhanced and precisely modeled thermal conductivity in polyimide nanocomposites with chemically modified graphene via in situ polymerization and electrospinning-hot press technology

Synergistic effects of boron nitride sheets and reduced graphene oxide on reinforcing the thermal conduction, SERS performance and thermal property of polyimide composite films

Modeling the In-Plane Thermal Conductivity of a Graphite/polymer Composite Sheet with a Very High Content of Natural Flake Graphite

Relationship Between Microstructure of Lamellar Graphene Sheets and Properties of Polyimide/Graphene Nanocomposites Film under Different Imidization Stages