Abstract:The effects of adding graphene to a polyetherimide matrix at various temperatures on its thermal conductivity were investigated by a series of molecular dynamics simulations within the framework of response surface methodology. In this work, an I‐optimal response surface model was used to systematically investigate the effects of graphene (Gr) content (Factor A; 0–10 wt%), temperature (Factor B; 0–200°C), and Gr layer structure (Factor C; monolayer versus five‐layer) on the thermal conductivities of PEI/Gr nanocomposites, which were determined using reverse non‐equilibrium molecular dynamics (RNEMD) simulation with the Müller‐Plathe algorithm. Based on a reduced quadratic model that was fit to the data, the effect of Factor A on thermal conductivity was found to be more pronounced for the PEI/Gr nanocomposite with the five‐layer Gr structure. Moreover, Factor B had expectedly the largest effect on thermal conductivity, followed by Factor C. However, these two factors were involved in significant interactions with Factor A. Based on numerical optimizations, the predicted thermal conductivities of the PEI/Gr nanocomposites varied from 0.057 (minimum) to 0.174 W m−1 K−1 (maximum). Overall, the maximum thermal conductivity of the PEI/Gr nanocomposite may be obtained at any given temperature in the range of 0–200°C by the addition of multi‐layer Gr (a cheaper alternative to monolayer Gr) at a content of 10 wt%. For example, the addition of 10 wt% five‐layer Gr to PEI at room temperature (25°) results yields an increase in its thermal conductivity of about 30%. Also, going from 0 to 100°C, an increase of about 76% is predicted for the thermal conductivity of the PEI/Gr nanocomposite containing 10 wt% five‐layer Gr. The results of this study shed light on the interactions between the three investigated factors. Highlights Thermal conductivities of polyetherimide/graphene (PEI/Gr) nanocomposites simulated. Graphene (Gr) content, temperature, and Gr layer structure affected the thermal behavior. Response surface methodology (RSM) aided in the identification of factorial interactions. Numerical optimization of the thermal conductivities enabled by a predictive model.

Significantly enhanced and precisely modeled thermal conductivity in polyimide nanocomposites with chemically modified graphene via in situ polymerization and electrospinning-hot press technology

Enhanced in-plane thermal conductivity of polyimide-based composites via in situ interfacial modification of graphene

Reduced Graphene Oxide Heterostructured Silver Nanoparticles Significantly Enhanced Thermal Conductivities in Hot-Pressed Electrospun Polyimide Nanocomposites

The Liquid-Exfoliation of Graphene Assisted with Hyperbranched Polyethylene-G- Polyhedral Oligomeric Silsesquioxane Copolymer and Its Thermal Property in Polydimethylsiloxane Nanocomposite

Thermal conductivity and mechanical properties enhancement of CF / PPBESK thermoplastic composites by introducing graphene

Experiments and Modeling of Thermal Conductivity of Flake Graphite/polymer Composites Affected by Adding Carbon-Based Nano-Fillers

Enhanced through-plane thermal conductivity in Polymer nanocomposites by constructing graphene-supported BN nanotubes

Thermal conductivity of graphene-based polymer nanocomposites

Vertically Aligned and Interconnected Graphite and Graphene Oxide Networks Leading to Enhanced Thermal Conductivity of Polymer Composites

Enhanced Thermal Conductivity in Polyamide 6 Composites Based on the Compatibilization Effect of Polyether-Grafted Graphene

Polyimide-based composites reinforced by carbon nanotube-grafted carbon fiber for improved thermal conductivity and mechanical property

Thermal conductivity of graphite nanofibers electrospun from graphene oxide-doped polyimide

Improved Thermal-Mechanical Performance of Polyimide Composites by Structural Design

Thermal Properties Of Carbon Nanofiber Reinforced High-Density Polyethylene Nanocomposites

Improving Thermal Conductivity and Tribological Performance of Polyimide by Filling Cu, CNT, and Graphene

Modeling the In-Plane Thermal Conductivity of a Graphite/polymer Composite Sheet with a Very High Content of Natural Flake Graphite

Mesoscopic modeling and experimental validation of thermal and mechanical properties of polypropylene nanocomposites reinforced by graphene-based fillers

Effect of graphene and carbon-nitride nanofillers on the thermal transport properties of polymer nanocomposites: A combined molecular dynamics and finite element study

A systematic molecular dynamics study of the thermal conductivities of polyetherimide/graphene nanocomposites using response surface methodology

Effect of non-covalent functionalisation on thermal and mechanical properties of graphene-polymer nanocomposites

Enhanced thermal conductivity in copolymerized polyimide