Abstract:In this paper, the transient breakdown voltage (TrBV) of a silicon-on-insulator (SOI) laterally diffused metal-oxide-semiconductor (LDMOS) device was increased by introducing a step P-type doping buried layer (SPBL) below the buried oxide (BOX). Device simulation software MEDICI 0.13.2 was used to investigate the electrical characteristics of the new devices. When the device was turned off, the SPBL could enhance the reduced surface field (RESURF) effect and modulate the lateral electric field in the drift region to ensure that the surface electric field was evenly distributed, thus increasing the lateral breakdown voltage (BVlat). The enhancement of the RESURF effect while maintaining a high doping concentration in the drift region (Nd) in the SPBL SOI LDMOS resulted in a reduction in the substrate doping concentration (Psub) and an expansion of the substrate depletion layer. Therefore, the SPBL both improved the vertical breakdown voltage (BVver) and suppressed an increase in the specific on-resistance (Ron,sp). The results of simulations showed a 14.46% higher TrBV and a 46.25% lower Ron,sp for the SPBL SOI LDMOS compared to those of the SOI LDMOS. As the SPBL optimized the vertical electric field at the drain, the turn-off non-breakdown time (Tnonbv) of the SPBL SOI LDMOS was 65.64% longer than that of the SOI LDMOS. The SPBL SOI LDMOS also demonstrated that TrBV was 10% higher, Ron,sp was 37.74% lower, and Tnonbv was 10% longer than those of the double RESURF SOI LDMOS.

Study of Breakdown Voltage Improvement of High-Voltage PLDMOS

Study of Drive-current Enhancement and Field Plate Optimization in 500V High-voltage NLDMOS

Off-state Avalanche Breakdown Induced Degradation in 20 V NLDMOS Devices

STUDY OF ULTRA HIGH VOLTAGE 500V NLDMOS WITH AGGRESSIVE DESIGN OF DRIFT REGION

The Investigation of Field Plate Design in 500 V High Voltage NLDMOS

Improving Breakdown Voltage Performance of SOI Power Device with Folded Drift Region

An improved on-resistance high voltage LDMOS with junction field plate

The Study of B V Degradation Mechanism for Ultra High Voltage LDMOS

A Novel 25v Pldmos Design in 700v Bcd Process

Analysis of the Breakdown Mechanism for an Ultra High Voltage High-Side Thin Layer Silicon-on-insulator P-Channel Lateral Double-Diffused Metal-Oxide Semiconductor

Experimental and Theoretical Study of an Improved Breakdown Voltage SOI LDMOS with a Reduced Cell Pitch

Breakdown Voltage Model and Structure Realization of a Thin Silicon Layer with Linear Variable Doping on a Silicon on Insulator High Voltage Device with Multiple Step Field Plates

The Optimization of Breakdown Voltage and Specific On-Resistance of 30V N-Vdmos with Short Channel

Numerical Investigation of Transient Breakdown Voltage Enhancement in SOI LDMOS by Using a Step P-Type Doping Buried Layer

Optimization of Impact Ionization in Metal–Oxide–Semiconductor Field-Effect Transistors for Improvement of Breakdown Voltage and Specific On-Resistance

Variation of Lateral Width Technique in SoI High-Voltage Lateral Double-Diffused Metal–Oxide–Semiconductor Transistors Using High-k Dielectric

Analysis of Simulation Approaches for the Breakdown Characteristics of SOI High-Voltage PMOS in a Fixed Power Supply

Increasing Breakdown Voltage of LDMOST Using Buried Layer

New Insight into Total-Ionizing-Dose Effect-Induced Breakdown Voltage Degradation for SOI LDMOS: Irradiation Charge Field Modulation

A Novel High Voltage LDMOS for HVIC with the Multiple Step Shaped Equipotential Rings

Study of the Degradation in LDMOS with STI Technology and Improve the Reliability with Several Methods