Abstract:Investigating the coupling effects of temperature levels and number of heating-water cooling cycles on thermal damage, cracking failure mechanisms, and mechanical responses of HDR (hot dry rock) is a vital issue during the exploitation of geothermal energy. In this study, a large number of granite samples exposed to high temperature treatment (25, 150, 300, 450, 600 °C) with multiple heating and water cooling cycles (1, 5, 10, 15) were carried out micro observations of X-ray diffraction (XRD) and scanning electron microscopy (SEM), and uniaxial compression tests with acoustic emission (AE) signals monitoring. The results show that, as the temperature level or number of heating and water cooling cycles increases, uniaxial compressive strength, elastic modulus, crack damage stress, and the damage index all present a reduction, while the peak axial strain, dilatancy volumetric strain and Poisson’s ratio increase. A genetic algorithm is established to evaluate the coupling influences of temperature and number of heating-water cooling cycles on the uniaxial compressive strength and dilatancy volumetric strain. The AE activities tend to be active due to crack initiation, development and coalescence. For a large temperature level or number of cycles, the AE signals remain active during the whole deformation process, while increase rate of the accumulated AE counts with time gradually slows down. The granites undergo a typical splitting failure mode, characterized by several tensile cracking planes at a low temperature or number of cycles, but present complicated crack networks of a turtle shape with increasing temperature or number of cycles, resulting in a larger fractal dimension of the induced surface cracks. The failure mechanism of rock gradually transfers from brittleness-dominated to ductility-dominated due to accumulated thermal damage. Then, the micro thermal damage mechanism of uncompressed granites is analyzed through microscopic observations of XRD and SEM. A power function is proposed to describe the relations between longitudinal wave velocity and uniaxial compressive strength. With increasing temperature or number of cycles, the maximum diffraction intensity of quartz decreases by 25.82%–38.89% and 13.42%–31.93%, respectively, and the micro thermal defects gradually develop, resulting in weakened macro bearing capacity.Article highlightsHeating and water cooling cycles effects on mechanical properties of granites.Heating and water cooling cycles effects on micro thermal damage and failure mechanisms of granites.Micro mechanisms for the macro strength responses.

Macroscopic and Microscopic Research on Egyptian Granodiorite Behavior Exposed to the Various Heating and Cooling Strategies

Thermal-Induced Microstructure Deterioration of Egyptian Granodiorite and Associated Physico-Mechanical Responses

On the Physical and Mechanical Responses of Egyptian Granodiorite after High-Temperature Treatments

Experimental Investigation on the Damage Evolution of Thermally Treated Granodiorite Subjected to Rapid Cooling with Liquid Nitrogen

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Experimental study on response characteristics of micro–macroscopic performance of red sandstone after high-temperature treatment

Experimental Research on the Mechanical Properties of Heated Granite after Rapid Cooling

Micro/macro physical and mechanical variation of red sandstone subjected to cyclic heating and cooling: an experimental study

Influence of Cooling Speed on the Physical and Mechanical Properties of Granite in Geothermal‐related Engineering

The role of multiple heating and water cooling cycles on physical and mechanical responses of granite rocks

Mesoscopic and macroscopic investigation of a dolomitic marble subjected to thermal damage

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite

Effect of Rapid Thermal Cooling on Mechanical Rock Properties

Experimental investigation on physical and mechanical properties of thermal cycling granite by water cooling

Comparative Study on Mechanical Properties and Crashing Characteristics of Granite After Real-Time High-Temperature and Natural-Cooling

Analysis of physical and mechanical properties of granite under different cooling methods under high-temperatures thermal cycles

Laboratory Investigation on Physical and Mechanical Properties of Granite After Heating and Water-Cooling Treatment

Structural Properties and Failure Characteristics of Granite after Thermal Treatment and Water Cooling

Experimental investigation on the macro- and micromechanical properties of water-cooled granite at different high temperatures

Real-Time Measurement of Mechanical Behavior of Granite During Heating–Cooling Cycle: A Mineralogical Perspective