Abstract:Purpose Although ceramic additive manufacturing (AM) could be used to fabricate complex, high-resolution parts for diverse, functional applications, one ongoing challenge is optimizing the post-process, particularly sintering, conditions to consistently produce geometrically accurate and mechanically robust parts. This study aims to investigate how sintering temperature affects feature resolution and flexural properties of silica-based parts formed by vat photopolymerization (VPP) AM. Design/methodology/approach Test artifacts were designed to evaluate features of different sizes, shapes and orientations, and three-point bend specimens printed in multiple orientations were used to evaluate mechanical properties. Sintering temperatures were varied between 1000°C and 1300°C. Findings Deviations from designed dimensions often increased with higher sintering temperatures and/or larger features. Higher sintering temperatures yielded parts with higher strength and lower strain at break. Many features exhibited defects, often dependent on geometry and sintering temperature, highlighting the need for further analysis of debinding and sintering parameters. Originality/value To the best of the authors' knowledge, this is the first time test artifacts have been designed for ceramic VPP. This work also offers insights into the effect of sintering temperature and print orientation on flexural properties. These results provide design guidelines for a particular material, while the methodology outlined for assessing feature resolution and flexural strength is broadly applicable to other ceramics, enabling more predictable part performance when considering the future design and manufacture of complex ceramic parts.

Process Optimization for Hydrothermal-Assisted Jet Fusion Additive Manufacturing of Ceramics

Binder-free Additive Manufacturing of Ceramics Using Hydrothermal-Assisted Jet Fusion

Hydrothermal-Assisted Transient Binder Jetting of Ceramics for Achieving High Green Density

STUDY OF DROPLET DIFFUSION IN HYDROTHERMAL-ASSISTED TRANSIENT JET FUSION OF CERAMICS

Hydrothermal Assisted Transient Jet Fusion of Ceramics: A Test Case Using Bentonite Clay

Slurry-based photoinitiator jetting process for ceramic additive manufacturing

Process Data-Based Knowledge Discovery in Additive Manufacturing of Ceramic Materials by Multi-Material Jetting (CerAM MMJ)

On enhancing the manufacturability and conversion of additively manufactured polymer-derived ceramics

Process Development of Porcelain Ceramic Material with Binder Jetting Process for Dental Applications

Understanding the consolidation mechanism of selective laser sintering/powder bed selective laser process of ceramics: Hydroxyapatite case

Lithography-based additive manufacturing of ceramics: Materials, applications and perspectives

Binder Jetting Additive Manufacturing of Ceramics: A Literature Review

Additive manufacturing of dense zirconia ceramics by fused deposition modeling via screw extrusion

The Influence of Printing Parameters, Post-Processing, and Testing Conditions on the Properties of Binder Jetting Additive Manufactured Functional Ceramics

Pressure‐assisted Binder Jetting for Additive Manufacturing of Mock Energetic Composites

Postprocessing Study for the Controllable Structures of Ceramic Green Parts Realized by a Flexible Binder Jetting Printing (BJP) Solution

Effect of sintering temperature on feature resolution and flexural strength of ceramics fabricated through vat photopolymerization additive manufacturing

3D printing of ceramics with controllable green‐body configuration assisted by the polyvinyl alcohol‐based physical gels

High-resolution multiceramic additive manufacturing based on digital light processing

Development of ceramic additive manufacturing: process and materials technology

Process development for green part printing using binder jetting additive manufacturing