Abstract:By incorporating 1‐cyclohexene‐1‐ethanamine cation into the host 1‐phenylbutylamine cation spacer and fabricating mixed‐cations quasi‐2D perovskites, a homogeneous phase distribution in quasi‐2D perovskite films is achieved through precise tuning of the phase formation energy. The resulting PeLEDs exhibit remarkable performance with an external quantum efficiency (EQE) of 5.8% at 467 nm. Organic and inorganic hybrid perovskites are a class of solution‐processable semiconductors that hold significant promise for light‐emitting diode applications. However, the development of efficient blue perovskite light‐emitting diodes (PeLEDs) has remained a critical challenge. Although significant advancements have been achieved in the development of sky‐blue PeLEDs, the performance of pure‐blue and deep‐blue PeLEDs still lags. In this manuscript, by incorporating 1‐cyclohexene‐1‐ethanamine cation (CEA+) into the host 1‐phenylbutylamine cation (PBA+) spacer and fabricating mixed‐cations quasi‐2D perovskites, a homogeneous phase distribution in quasi‐2D perovskite films is achieved through precise tuning of the phase formation energy. The resulting PeLEDs exhibit remarkable performance with an external quantum efficiency (EQE) of 5.8% at 467 nm, which is one of the highest EQEs among the deep‐blue light quasi‐2D PeLED devices with emission wavelengths below 470 nm, Additionally, the device demonstrates a half‐lifetime of ≈ 25 min. Furthermore, the PeLEDs utilizing mixed‐cation perovskite exhibit a stable electroluminescence (EL) spectrum under varying voltage biases, even when the chlorine content in the halogen sites reaches as high as 30%. Overall, this work offers a novel and promising avenue to achieve both high EQE and a stable EL spectrum in blue‐light quasi‐2D PeLEDs.

Tailoring the 2D/3D Phase Segregation for Highly Efficient Si-Based Perovskite Light-Emitting Diodes

Multifunctional Additives for Bright, Efficient and Stable Lead-bromide Perovskite LEDs

Efficient and High-Radiance Silicon-Based Perovskite Light-Emitting Diodes Through Phase Segregation Control

Deep‐Red Perovskite Light‐Emitting Diodes with External Quantum Efficiency Exceeding 21% Enabled by Ligand‐Modulated Dimensionality Control

Tailoring the Surface Morphology and Phase Distribution for Efficient Perovskite Electroluminescence.

Perovskite Light‐Emitting Diodes with EQE Exceeding 28% through a Synergetic Dual‐Additive Strategy for Defect Passivation and Nanostructure Regulation

Unraveling Size-Dependent Ion-Migration for Stable Mixed-Halide Perovskite Light-Emitting Diodes

Improved Efficiency for Silicon‐Based Perovskite Light‐Emitting Diodes Via Interfacial Hydrophilic Modification

Efficient and Stable Red Perovskite Light‐Emitting Diodes via Thermodynamic Crystallization Control

Multiple Phase Regulation Enables Efficient and Bright Quasi-2D Perovskite Light-Emitting Diodes

Efficient Quasi-2D Perovskite Light-Emitting Diodes Enabled by Regulating Phase Distribution with a Fluorinated Organic Cation

Phase Distribution Management for High-Efficiency and Bright Blue Perovskite Light-Emitting Diodes

Ions-induced Assembly of Perovskite Nanocomposites for Highly Efficient Light-Emitting Diodes with EQE Exceeding 30

Rearranging the Phase Distribution of Quasi-2D Perovskite for Efficient and Narrow Emission Perovskite Light-Emitting Diodes

Rational Interface Engineering for Efficient Flexible Perovskite Light-Emitting Diodes.

High-performance large-area quasi-2D perovskite light-emitting diodes

Co‐Interlayer Engineering for Homogenous Phase Quasi‐2‐D Perovskite and High‐Performance Deep‐Blue Light‐Emitting Diodes

Highly bright and stable single-crystal perovskite light-emitting diodes

High‐Efficiency Top‐Emitting Green Perovskite Light Emitting Diode with Quasi Lambertian Emission

Smoothing Energy Transfer Enabling Efficient Large‐Area Quasi‐2D Perovskite Light‐Emitting Diodes

Efficient Green Quasi-Two-Dimensional Perovskite Light-Emitting Diodes Based on Mix-Interlayer