Abstract:SARS-CoV-2, the virus that causes the disease COVID-19, remains viable on solids for periods of up to 1 week, so one potential route for human infection is via exposure to an infectious dose from a solid. We have fabricated and tested a coating that is designed to reduce the longevity of SARS-CoV-2 on solids. The coating consists of cuprous oxide (Cu2O) particles bound with polyurethane. After 1 h on coated glass or stainless steel, the viral titer was reduced by about 99.9% on average compared to the uncoated sample. An advantage of a polyurethane-based coating is that polyurethane is already used to coat a large number of everyday objects. Our coating adheres well to glass and stainless steel as well as everyday items that people may fear to touch during a pandemic, such as a doorknob, a pen, and a credit card keypad button. The coating performs well in the cross-hatch durability test and remains intact and active after 13 days of being immersed in water or after exposure to multiple cycles of exposure to the virus and disinfection.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.0c11425.Chemical composition of Cu2O particles (Table S1), elemental composition of the Cu2O/PU film measured by EDS (Table S2), virus titration data (Tables S3–S10), alternative methods for preparing the Cu2O/ PU film, particle size distribution of Cu2O particles (Figure S1), SEM Images of the Cu2O/PU coating before and after plasma cleaning (Figure S2), XPS results for Cu2O/PU (Figure S3), XPS results for the PA polymer films (Figure S4), XPS results for the PDADMAC polymer films (Figure S5), histogram of residuals for the virus titer (Figure S6), viral titer for the polyurethane film (Figure S7), viral titer for the high-contact angle sample (Figure S8), images of various items coated in Cu2O/PU (Figure S9), viral titer for samples stored under water for 13 days (Figure S10), cross-hatch test results for Cu2O/PU on stainless steel (Figure S11), peel test results (Figure S12), viral titer for PA (polyallylamine) (Figure S13), and viral titer for PDADMAC (Figure S14) (PDF)This article has not yet been cited by other publications.

Study on Flexible Surface Dielectric Barrier Discharge Plasma Film for in Situ Inactivation of Bacteria and Viruses

Rapid Disinfection Performance of a Touchable Pulsed SDBD Nonthermal Plasma

Efficient inactivation of the contamination with pathogenic microorganisms by a combination of water spray and plasma-activated air

In-duct grating-like dielectric barrier discharge system for air disinfection

Systematical Investigations on Disinfection Effectiveness of Far-UVC (222 Nm) Irradiation: from Laboratory Study to Field Tests

Investigations on the surface disinfection efficacy of far-UVC 222 nm germicidal irradiance device in a controlled environment and field test

A low power flexible dielectric barrier discharge disinfects surfaces and improves the action of hydrogen peroxide

Inactivation mechanism of cold plasma combined with 222 nm ultraviolet for spike protein and its application in disinfecting of SARS-CoV-2

Disinfection of an ambulance using a compact atmospheric plasma device

Ozone as a disinfectant in laboratory surfaces against the SARS-cov-2 coronavirus

Combination of UV radiation with 3D structure media filter for indoor air disinfection

A Novel Approach on Dielectric Barrier Discharge Using Printed Circuit Boards

Design, construction and robust validation of a germicidal device based on UV irradiation: a necessity for hospital disinfection in the COVID-19 era

Human coronavirus 229E inactivation on porous and nonporous materials using dielectric barrier discharge (DBD) plasma

Corona discharges with water electrospray for Escherichia coli biofilm eradication on a surface

Bioaerosol Inactivation by a Cold Plasma Ionizer Coupled with an Electrostatic Precipitator

Nanoscale plasma-activated aerosol generation for in situ surface pathogen disinfection

A Surface Coating that Rapidly Inactivates SARS-CoV-2

The Virus Removal in UV Irradiation, Ozonation and Chlorination

Sustainable and effective antimicrobial surface based on cellulose thin films

Design and performance evaluation of a photocatalytic reactor for indoor air disinfection