Abstract:A new technology to the pharmaceutical field is presented: surface decontamination by plasmas The technology is comparable to established barrier systems like e-beam, volatile hydrogen peroxide, or radiation inactivation of microbiological contaminations. This plasma technology is part of a fully automated and validated syringe filling line at a major pharmaceutical company and is in production operation. Incoming pre-sterilized syringe containers ("tubs") are processed by plasma, solely on the outside, and passed into the aseptic filling isolator upon successful decontamination. The objective of this article is to present the operating principles and develop and establish a validation routine on the basis of standard commercial biological indicators. Their decontamination efficacies are determined and correlated to the actual inactivation efficacy on the pharmaceutical packaging material.The reference setup is explained in detail and a short presentation of the cycle development and the relevant plasma control parameters is given, with a special focus on the in-process monitor determining the cycle validity. Different microbial inactivation mechanisms are also discussed and evaluated for their contribution and interaction to enhance plasma decontamination. A material-dependent inactivation behavior was observed. In order to be able to correlate the tub surface inactivation of Geobacillus stearothermophilus endospores to metallic biological indicators, a comparative study was performed. Through consistently demonstrating the linear inactivation behavior between the different materials, it becomes possible to develop an effective and time-saving validation scheme. Lay abstract: The challenge in new decontamination systems lies in a thorough validation of the inactivation efficacy under different operating regimes. With plasma, as an ionized gas, a new barrier concept is introduced into pharmaceutical aseptic processing of syringes. The presented system operates in vacuum and only decontaminates the outer surface of pre-sterilized syringe containers ("tubs"), before they are transferred into the aseptic area. The plasma does not penetrate into the tub. This article discusses the phase from development and test germ selection, across the identified sporicidal mechanisms, to a proposal for a validation scheme on the basis of commercially available biological indicators. A special focus is placed on an extensive investigation to establish a link between the tub surface microbial kill (polystyrene and Tyvek(and (2)) ) and biological indicator inactivation (stainless steel). Additionally, a rationale is developed on how an optical in-process monitor can be applied to establish a validatable limit on the base of the predetermined inactivation data of Geobacillus stearothermophilus endospores.

Decolorization of Continuous Dyeing Wastewater by Ozonation

Influence of in vivo-incorporated fluoride on collagen metabolism by mouse calvaria in organ culture.

Rapid Disinfection Performance of a Touchable Pulsed SDBD Nonthermal Plasma

Experimental Study on Bacteria Disinfection Using a Pulsed Cold Plasma Jet with Helium/oxygen Mixed Gas

Plasma Decontamination: A Case Study on Kill Efficacy of Geobacillus stearothermophilus Spores on Different Carrier Materials

Rapid Inactivation of Biological Species in the Air Using Atmospheric Pressure Nonthermal Plasma

Radiological case of the month. Hyperthyroidism as a cause of superior mesenteric artery syndrome.

A low power flexible dielectric barrier discharge disinfects surfaces and improves the action of hydrogen peroxide

Isolation and biological characterization of staphyloferrin B, a compound with siderophore activity from staphylococci.

Ambulance disinfection using Ultraviolet Germicidal Irradiation (UVGI): Effects of fixture location and surface reflectivity

Efficient inactivation of the contamination with pathogenic microorganisms by a combination of water spray and plasma-activated air

Use of a Hydrogen Peroxide Nebulizer for Viral Disinfection of Emergency Ambulance and Hospital Waiting Room

Nanoscale plasma-activated aerosol generation for in situ surface pathogen disinfection

In situ generation of cold atmospheric plasma-activated mist and its biocidal activity against surrogate viruses for COVID-19

A Novel Approach on Dielectric Barrier Discharge Using Printed Circuit Boards

Distributed compact plasma reactor decontamination for planetary protection in space missions

Air Disinfection-From Medical Areas to Vehicle

Separation of vacancy and interstitial depth profiles in ion-implanted silicon: Experimental observation

Mask disinfection using atmospheric pressure cold plasma

Effect of Cold Atmospheric Plasma on SARS-CoV-2 Inactivation: A Pilot Study in the Hospital Environment

Proposing an Affordable Plasma Device for Polymer Surface Modification and Microbial Inactivation