Enhancing the strength of Sc-containing Al-Cu-Li alloys by modifying the precipitation behavior through plastic deformation and heat treatment
Yuankang Xie,Shengdan Liu,Xiaobin Guo,Chaojie Liang,Yunlai Deng
DOI: https://doi.org/10.1016/j.matchar.2023.113558
IF: 4.537
2023-12-14
Materials Characterization
Abstract:Al-Cu-Li alloys are used extensively in the aerospace manufacturing industry for their outstanding properties, however, the addition of trace Sc elements will form high-temperature insoluble (Cu, Sc)-containing phases during homogenization leads to a decrease in age-strengthening, and there is a limited investigation on how to overcome this unfavorable factor. In this work, the effects of plastic deformation coupled with heat treatment on the microstructure and mechanical properties of Sc-containing Al-Cu-Li alloy were systematically investigated by using age-hardening curves and room-temperature tensile tests combined with characterization by TEM, EBSD, and SEM/EDS. The results show that plastic deformation before high-temperature treatment fragments and promotes the dissolution of coarse phases, suppresses the development of (Cu, Sc)-containing enriched phases, and simultaneously increases the content of Cu atoms within the Al matrix. Among all precipitates (GPB zones, S phases, T 1 phases) after T6 aging, T 1 phases act as the dominant strengthening phase of the alloy. At the same time, we found that the decrease in the Cu-containing residual phase after solid solution treatment will result in a remarkably increasing number density and volume fraction of T 1 phases at the peak aging. In a word, we obtain a good strength-ductility trade-off (the yield strength is ~500 MPa while maintaining ~10% elongation) Al-Cu-Li alloy with Sc element by optimizing the distribution of Cu elements and modulating the aging precipitation behavior. Our proposed process is expected to provide an experimental and theoretical guide toward the development of Al-Cu-Li alloys with superior properties.
materials science, multidisciplinary,metallurgy & metallurgical engineering, characterization & testing