Abstract:Biological materials possess unique and desirable energy-absorbing mechanisms and structural characteristics worthy of consideration by engineers. For example, high levels of energy dissipation at low strain rates via triggering of crack delocalization combined with interfacial hardening by platelet interlocking are observed in brittle materials such as nacre, the iridescent material in seashells. Such behaviours find no analogy in current engineering materials. The potential to mimic such toughening mechanisms on different length scales now exists, but the question concerning their suitability under dynamic loading conditions and whether these mechanisms retain their energy-absorbing potential is unclear. This paper investigates the kinematic behaviour of an 'engineered' nacre-like structure within a high strain-rate environment. A finite-element (FE) model was developed which incorporates the pertinent biological design features. A parametric study was carried out focusing on (i) the use of an overlapping discontinuous tile arrangement for crack delocalization and (ii) application of tile waviness (interfacial hardening) for improved post-damage behaviour. With respect to the material properties, the model allows the permutation and combination of a variety of different material datasets. The advantage of such a discontinuous material shows notable improvements in sustaining high strain-rate deformation relative to an equivalent continuous morphology. In the case of the continuous material, the shockwaves propagating through the material lead to localized failure while complex shockwave patterns are observed in the discontinuous flat tile arrangement, arising from platelet interlocking. The influence of the matrix properties on impact performance is investigated by varying the dominant material parameters. The results indicate a deceleration of the impactor velocity, thus delaying back face nodal displacement. A final series of FE models considered the identification of an optimized configuration as a function of tile waviness and matrix properties. In the combined model, the optimized configuration was capable of stopping the ballistic threat, thus indicating the potential for bioinspired toughened synthetic systems to defeat high strain-rate threats.

Energy-absorption Characteristics of Nacre-inspired Carbon/Epoxy Composite Tubes under Impact Loading

Damage-Tolerance Strategies for Nacre Tablets

Experimental investigation on the energy absorption behaviour of nacre-inspired composite circular tubes under axial compression

Fabrication and Characterisation of Alumina/aluminium Composite Materials with a Nacre-Like Micro-Layered Architecture

Nacre-inspired Design of CFRP Composite for Improved Energy Absorption Properties

Cost-effective Fabrication of Bio-Inspired Nacre-Like Composite Materials with High Strength and Toughness

Nacre-inspired topological design tuning the impact resistant behaviors of composite plates

Interfacial Strength-Controlled Energy Dissipation Mechanism and Optimization in Impact-Resistant Nacreous Structure

Anomalous inapplicability of nacre-like architectures as impact-resistant templates in a wide range of impact velocities

Rigidity-toughness Coupling in Architected Composite Materials for Enhanced Impact Resistance

Ballistic Behavior of Bioinspired Nacre-like Composites

Energy-absorbing characteristics of hollow-cylindrical hierarchical honeycomb composite tubes under conditions of dynamic crushing

Experimental Investigation on the Crashworthiness of Braided Glass/Epoxy Tubes Subjected to Axial Impacting

Improved Ballistic Performance of a Continuous-Gradient B4C/Al Composite Inspired by Nacre

Energy Absorption Properties Of Braided Glass/Epoxy Tubes Subjected To Quasi-Static Axial Crushing

Biologically inspired crack delocalization in a high strain-rate environment

MICROSCOPIC MECHANISM OF ENERGY ABSORPTION BEHAVIOR FOR GLASS/EPOXY TUBES UNDER IMPACT LOADING

Axial Impact Behavior and Energy Absorption Efficiency of Composite Wrapped Metal Tubes

Energy-absorbing Characteristics of Hollow-Cylindrical Hierarchical Honeycomb Composite Tubes Inspired a Beetle Forewing

Bioinspired nacre-like 2024Al/B4C composites with high damage tolerance

Energy absorption behavior of composite tube structures