Abstract:A linear failure criterion is widely used in slope stability analyses. However, the strength envelope of almost all geomaterials has the nature of nonlinearity. This paper computes rigorous upper bounds on slope stability factors under the condition of plane strain with a nonlinear yield criterion by employing the upper bound theorem of plasticity. A stability factor (or a limit load) computed using a linear Mohr-Coulomb (MC) failure criterion which circumscribes the actual nonlinear failure criterion is an upper bound value of the actual stability factor (or limit load). In this paper, an improved method using a generalized tangential technique to approximate a nonlinear failure criterion is proposed to estimate the stability factor of a slope on the basis of the upper bound theorem of plasticity. Using the generalized tangential technique, the curve of the nonlinear failure criterion is simplified as a set of straight lines according to the linear MC failure criterion. The straight line is tangential to the curve of the nonlinear failure criterion. The set of straight lines of the linear MC failure criterion is employed to formulate the slope stability problem as a classical optimization problem. The objective function formulated in this way is minimized with respect to the location of sliding body center and the location of tangency point. Two typical slope stability problems (a homogeneous soil slope with two slope angles and a vertical cut slope with a tension crack) are analyzed using the proposed method. For the soil slope with two slope angles, the computed results are compared with published solutions by others. The comparison shows that the proposed method gives reasonable and consistent values of the stability factor of the slope. For the vertical cut slope with a tension crack, a statically admissible stress field is constructed for the slope. The stress field does not violate the nonlinear failure criterion. Lower bound solutions are obtained by satisfying stress equilibrium conditions. The upper bound solutions obtained from the proposed method are equal to the lower bound solutions for the vertical cut slope. The agreement further supports the validation of the proposed approach. The influences of the strength parameters in the nonlinear criterion on the stability of slopes are also studied and discussed in this paper.

Seismic Bearing Capacity of Strip Footing with Nonlinear Mohr–Coulomb Failure Criterion

Seismic Bearing Capacity of Strip Footings with Modified Pseudo-dynamic Method

THE CRITICAL EDGE LOAD OF COMPOSITE GROUND REINFORCED BY STONE COLUMNS UNDER RIGID FOUNDATION

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Method of Rigorous Characteristics for Seismic Bearing Capacity of Strip Footings Placed Adjacent to Homogeneous Soil Slopes

Modified pseudo–dynamic bearing capacity of strip footing on rock masses

The Bearing Capacity Factor Nγ of Strip Footings on C–ϕ–γ Soil Using the Method of Characteristics

A pseudo-static approach to the seismic bearing capacity of eccentrically loaded footing lying on rock obeying a generalized Hoek–Brown strength criterion

Oblique and eccentric bearing capacity of embedded strip footings using the method of rigorous characteristics

Slope Stability Analysis with Nonlinear Failure Criterion

DEM–FEM Analysis of Soil Failure Process Via the Separate Edge Coupling Method

Rupture sismique des fondations par perte de capacité portante: Le cas des semelles circulaires

Seismic stability and failure mode of the slope containing a two-pile foundation

Seismic analysis of coastal slope stability considering strength nonlinearity and tension cut-off

Effects of Strength Anisotropy and Strain Softening on Soil Bearing Capacity through a Cosserat Nonlocal Finite-Element Method

Seismic pseudo-static active earth pressure of narrow c-φ soils on gravity walls under translational mode

Stochastic Bearing Capacity and Failure Mechanism of Footings Placed Adjacent to Slopes considering the Anisotropic Spatial Variability of the Clay Undrained Strength

Probabilistic failure envelopes of strip foundations on soils with non-stationary characteristics of undrained shear strength

Time-domain dynamic constitutive model suitable for mucky soil site seismic response

Modified Mohr–Coulomb criterion for nonlinear strength characteristics of rocks

Ultimate bearing capacity of strip footings on Hoek-Brown rock slopes – A stress characteristics solution