Abstract:To explore an innovative approach to prepare high-performance Mo-based refractory alloys, the rapid solidification mechanisms of undercooled Mo-40%Co hyperperitectic alloy were investigated by both electromagnetic levitation (EML) and drop tube (DT) techniques. During EML experiments, typical peritectic solidification still prevailed even at the maximum undercooling of 252 K (0.14 T-T). The dendrite growth velocity of primary sigma-Mo3Co2 compound varied with alloy undercooling by a power relation, which attained 24.3 mm s(-1). As the bulk undercooling increased, the conspicuous dendrite fragmentation of primary phase took place, resulting in its grain refinement and volume fraction reduction. Meanwhile, the second recalescence degree exhibited a decreasing tendency, which indicated that the peritectic reaction was remarkably suppressed in the undercooled state. Under free fall condition, two critical diameters were determined for tiny alloy droplets and the corresponding undercooling thresholds were calculated as 361 and 443 K, respectively. When the alloy droplet was larger than 707 mu m, the typical peritectic solidification proceeded and the final microstructure was composed of primary sigma-Mo3Co2 dendrites and interdendritic epsilon-Mo6Co7 peritectic phase. With the reduction of droplet diameter, the direct nucleation of peritectic phase was induced. In this case, the epsilon-Mo6Co7 intermetallic compound regions appeared preferentially at the periphery of alloy droplets, whereas the typical peritectic microstructure filled in the center area. Once the droplet diameter decreased to 93 mu m, the peritectic solidification characteristics disappeared completely and the metastable epsilon-Mo6Co7 single phase became the unique growth morphology.

Optimized Tribological Performance Deriving from Multiple Strengthening Effects of Fe–Ni–Mo–Cr Alloy

Excellent Tribological Performance at Elevated Temperatures and Associated Mechanisms of Novel AlCoCrFeNi-MoS2 Solid Self-Lubricating Composite

Promotion or Suppression of Eutectic and Peri-Eutectic Growth in Containerlessly Processed Fe–Ni–Ti Alloys

High Temperature Tribological Performance of a Cost-Effective Eutectic High Entropy Alloy Al0.8CrFeNi2.2: Comparison with AlCoCrFeNi2.1

Domain Structure Ordering and Magnetic Property Enhancement of Containerlessly Processed Quaternary Fe-Mo-Ni-Cr Alloy

Rapid Growth Kinetics and Microstructure Modulation of Intermetallic Compounds Within Containerlessly Solidifying Mo-Co Refractory Alloys

Microstructure Control and Micromechanical Property Enhancement of CoCrFeNiZr 0.5 Alloy under Melt Quenching and Electrostatic Levitation Conditions

Magnetic and Compressive Properties of Ternary Ni–Fe–Ti Eutectic Alloy Processed by Electromagnetic Levitation Technique

Rapid solidification of undercooled FeCoNiCu multi-principal element alloy: Mechanical and tribological properties

Enhanced Tensile Performance of Ternary Fe-Ni-Ti Peri-Eutectic Alloy Through Directional Solidification Associated with Thermal Processing

Effect of Microstructure Evolution on Micro/Nano‐Mechanical Property of Fe–Co–Ni Ternary Alloys Solidified under Microgravity Condition

Influence of Molybdenum Content and Load on the Tribological Behaviors of In-Situ Cr3C2-20 Wt % Ni Composites

Simultaneously enhancing mechanical and tribological performance in undercooled Co-18.5 at. % B alloys

Tribological Behavior of In-Situ (cr, Mo)/Fe3al-20 Wt.%Al2o3 Composites at Elevated Temperatures

Influence of Al and Mo on microstructure and tribological behaviors of Co-based superalloy

Enhancement of Tribological Characteristics for Fe-0.55C PM Steel via Addition of Mo-Ni under Different Deformation Ratios

Interfacial Morphology and Tribo-Corrosion Behaviour of Fe-15.3 Wt % Cr-3.1 Wt % B-6.2 Wt % Mo Alloy in Molten Aluminium

Joint Effect of Mo and Cr on Microstructure and Properties of Ti–Al–Mo–Cr–B Alloys

Tribology, corrosion, and tribocorrosion performance of aged lightweight steels: Effects of oxide film and carbide

An atomic insight into the stoichiometry effect on the tribological behaviors of CrCoNi medium-entropy alloy

Tribological performance of a cost-effective CrFeNiAl0.3Ti0.3 high entropy alloy based self-lubricating composite in a wide temperature range