Abstract:The ever-increasing silicon photovoltaics industry produces a huge annual production of silicon waste (2.03 × 105 tons in 2019), while lignin is one of the main waste materials in the traditional paper industry (7.0 × 107 tons annually), which lead to not only enormous wastage of resources but also serious environment pollution. Lithium-ion batteries (LIBs) are the dominating power sources for portable electronics and electric vehicles. Silicon (Si)-based material is the most promising anode choice for the next-generation high-energy-density LIBs due to its much higher capacity than the commercial graphite anode. Here, we proposed the use of these silicon and lignin waste as sustainable raw materials to fabricate high-capacity silicon/carbon (Si/C) anode materials for LIBs via a facile coprecipitation method utilizing electrostatic attracting force, followed by a thermal annealing process. The as-achieved Si/C composite featured an advanced material structure with micrometer-sized secondary particles and Si nanoparticles embedded in the carbon matrix, which could tackle the inherent challenges of Si materials, including low conductivity and large volume change during the lithiation/delithiation processes. As expected, the obtained Si/C composite displayed an initial charge capacity of 1016.8 mAh g–1, which was 3 times that of a commercial graphite anode in the state-of-the-art LIBs, as well as a high capacity retention of 74.5% at 0.2 A g–1 after 100 cycles. In addition, this Si/C composite delivered superior rate capability with a high capacity of 575.9 mAh g–1 at 2 A g–1, 63.4% of the capacity at 0.2 A g–1. The utilization of industrial Si and lignin waste provides a sustainable route for the fabrication of advanced high-capacity anode materials for the next-generation LIBs with high economic and environmental feasibility.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16865?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16865</a>.Additional experimental data including SEM, TEM, and HR-TEM images of Si–C and Si/C composite after cycles and EIS spectra of Si/C and pure Si before cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16865/suppl_file/am0c16865_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A high-performance nano-Sn/G@C composite anode prepared by waste carbon residue from spent Lithium-ion batteries

Facile Fabrication of High-Performance Li-Ion Battery Carbonaceous Anode from Li-Ion Battery Waste

A Universal Molten Salt Method for Direct Upcycling of Spent Ni‐rich Cathode Towards Single‐crystalline Li‐rich Cathode

Recovered Cobalt-Nickel Sulfide from Spent Lithium-Ion Batteries As an Advanced Anode Material Toward Sodium-Ion Batteries

Scalable Synthesis of High-Performance Si/CNTs/C Anodes for Lithium-Ion Batteries Based on Recycling of Silicon Cutting Waste

The facile and controllable synthesis of ultrafine Sn nanocrystals loaded on carbon black for high‐performance lithium storage

Walnut Core-Like Hollow Carbon Micro/nanospheres Supported SnOx@C Composite for High Performance Lithium-Ion Battery Anode

Ball‐Milling Synthesis of Richly Oxygenated Graphene‐Like Nanoplatelets from used Lithium Ion Batteries and Its Application for High Performance Sodium Ion Battery Anode

Nitrogen-Doped porous carbon embedded Sn/SnO nanoparticles as high-performance lithium-ion battery anode

Hierarchical Composite from Carbon Nanofibers Wrapped SnS Core–Shell Nanoparticles as an Anode for Lithium-Ion Batteries

A nanoscale interlayer void design enabling high-performance SnO2-carbon anodes

SnO2 Nano-Crystals Anchored on N-doped Porous Carbon with Enhanced Lithium Storage Properties

Sustainable and facile synthesis of high-performance nitrogen-doped carbon/graphene@LiFePO4 cathode materials from spent LiFePO4

Nitrogen-Doped Carbon-Encapsulated SnO2@Sn Nanoparticles Uniformly Grafted on Three-Dimensional Graphene-like Networks as Anode for High-Performance Lithium-Ion Batteries

In situ fabrication of W-doped SnO2 nanoparticles anchored in ultrathin graphite nanosheets as high performance anode material for lithium ion batteries

Upcycling of Spent LiNi0.33Co0.33Mn0.33O2 to Single-Crystal Ni-Rich Cathodes Using Lean Precursors

Recycling of Lignin and Si Waste for Advanced Si/C Battery Anodes

Sn/SnO 2 @C Composite Nanofibers As Advanced Anode for Lithium-Ion Batteries

Resource recovery and regeneration strategies for spent lithium-ion batteries: Toward sustainable high-value cathode materials

Upcycling of Spent LiNi 0.33 Co 0.33 Mn 0.33 O 2 to Single-Crystal Ni-Rich Cathodes Using Lean Precursors

Cellulose-Hydrogel-Derived Self-Activated Carbon/SnO2 Nanocomposites for High-Performance Lithium Storage