Abstract:To solve the contact/impact problem of flexible bodies in arbitrary shape, the finite element method is widely used to discretize the contact bodies. In the finite element method, two contact models are mainly used to compute the contact force, i.e., penalty function method and additional constraint method, which are different in constraint imposition strategy. The penalty function method regards the contact effect as a force function of local penetration at the contact point and its rate. This method has gained significant popularity because it does not bring extra dimensions to the dynamic equations and does not need to solve constraint equations either. However, as the non-penetration constraint is not precisely satisfied in the contact process when using the penalty function method, the accuracy of the numerical simulation depends on the choice of the penalty parameter. On the other hand, the additional constraint method can strictly satisfy the contact constraint condition by introducing the Lagrange multipliers into the dynamic equations, but the method poses some numerical difficulties due to the additional effort required to solve the multipliers. Considering the advantages and disadvantages of the two contact methods, the interactive mode method is proposed. This method divides the whole model into local static module and main dynamics module. The static module establishes a local finite element model of the contact region to compute the contact force, and the main dynamics module is used to obtain the kinematic variables of the whole body. In the simulation, the two modules are coupled by exchanging displacements and forces in each time step. In the current integration step, the main dynamics module provides the displacements of the boundaries of the local contact region at first, the values are transferred to the local finite model to compute the contact force next, and then the contact force is fed back to the dynamics module for the calculation of the next step. The proposed method combines the advantages of both the additional constraint method and the penalty function method, in which not only the artificial selection of penalty parameter is avoided, but also the non-penetration constraint of local contact region is satisfied and the numerical solution is convenient. The validity of the proposed method is verified by the comparison between simulation results and experimental results of a rod-plate impact case. Furthermore, a multi-point impact problem of a slider sliding in the gap chute is presented to validate the proposed method of dealing with the general impact problem.

Dynamic Modeling and Analysis for Inflatable Mechanisms Considering Adhesion and Rolling Frictional Contact

Dynamic Modeling and Simulation for Pneumatic Landing Airbag System with Frictional Contact

Dynamics Analysis of Spatial Mechanisms with Dry Spherical Joints with Clearance Using Finite Particle Method

Dynamic modeling of a sliding ring on an elastic rod with incremental potential formulation

Nonlinear Dynamic Formulation for Flexible Origami-Based Deployable Structures Considering Self-Contact and Friction

Dynamic Modeling for Foldable Origami Space Membrane Structure with Contact-Impact During Deployment

A Novel Inclined Membrane Contact Model for Analyzing the Pneu-Net Soft Actuator Lateral Wall Contact

Dynamic Modeling Method of Flexible Bodies with Contact/impact Based on Interactive Mode

Nonlinear Dynamic Modeling for A Flexible Laminated Composite Appendage Attached to A Spacecraft Body Undergoing Deployment and Locking Motions

Dynamic modeling and analysis of multi-link mechanism considering lubrication clearance and flexible components

Dynamic analysis of planar mechanical systems considering stick-slip and Stribeck effect in revolute clearance joints

Dynamic modelling and simulation analysis of a pneumatic toothed soft actuator

Air rudder mechanism dynamics considering two elements: Joint clearance and link flexibility

A regularized approach for frictional impact dynamics of flexible multi-link manipulator arms considering the dynamic stiffening effect

Dynamic Analysis for Peg-in-hole Assembly with Contact Deformation

Dynamic simulation for beam to beam frictionless contact using a novel region detection algorithm

A Methodology for Modeling and Simulating Frictional Translational Clearance Joint in Multibody Systems Including a Flexible Slider Part

On adhesive contact between spheres with rolling adhesion

Effective Enhanced Model for a Large Deformable Soft Pneumatic Actuator

A Molecular Dynamics Study on the Adhesive Contact with Effect of Tangential Forces

Dynamic investigation of a spatial multi-body mechanism considering joint clearance and friction based on coordinate partitioning method