Abstract:Last decade has seen a growing trend toward smartphone-based biochemical sensing systems. Meanwhile, flexible electrochemical sensing devices like wristbands, patches, and tattoos have been widely developed for in situ detections of analyzes in accessible biofluids. For these devices, the connectivity with smartphone and the flexibility of the whole device are hard to achieve at the same time, due to the need for rigid batteries or wired connections. Here, a smartphone-based battery-free and flexible electrochemical patch is developed for real-time calcium and chloride ions detections in various biofluids. The patch is integrated with near field communication (NFC) module, on-site signal processing circuitry, and an all-printed stretchable electrode array which can maintain stable conductivity during stretching, without the need for serpentine designs. The device enables wireless power harvesting, on-site signal processing, and wireless data transmission capabilities. NFC-enabled smartphones can wirelessly power the patch and get the detection results through inductive coupling between antennas. The calcium and chloride sensors showed good sensitivity, repeatability, selectivity, and stability in quantitative detections of target ions. Ex situ measurements in serum, urine, tear, and sweat demonstrated good consistency with specialized instrument. Real-time on-body sweat analysis with the patch was also performed, which further indicated the usability and stability of the device in wearable applications. This platform provides a battery-free, wireless, and flexible solution for smartphone-based electrochemical sensing systems, which can be applied to rapid analysis of various biofluids.

A 17.7µW CDS-CTIA for Wireless-powered Wearable Electrochemical Sweat Sensors.

Battery‐Free and Wireless Epidermal Electrochemical System with All‐Printed Stretchable Electrode Array for Multiplexed in Situ Sweat Analysis

An ASIC Solution for Intelligent Electrodes and Active-Cable Used in a Wearable ECG Monitoring System.

A Multi-Parameter Bio-Electric ASIC Sensor with Integrated 2-Wire Data Transmission Protocol for Wearable Healthcare System

Three-dimensional Paper-Based Microfluidic Electrochemical Integrated Devices (3D-PMED) for Wearable Electrochemical Glucose Detection

Smartphone-based Battery-Free and Flexible Electrochemical Patch for Calcium and Chloride Ions Detections in Biofluids

A 10-Channel, 120 nW/Channel, Reconfigurable Capacitance-to-Digital Converter for Sub- μW Robust Wearable Sensing

A Miniaturized Flexible Patch Based on CNT Fiber Sensors and Highly Integrated SoC for Analysis of Sweat

A Wireless Artificial Mechanoreceptor in 180-nm CMOS

A Low-Power Portable ECG Sensor Interface with Dry Electrodes

A Wide Dynamic Range And Fast Update Rate Integrated Interface For Capacitive Sensors Array

A 300-mV 220-nW event-driven ADC with real-time QRS detection for wearable ECG sensors

Ultra-Small Wearable Flexible Biosensor for Continuous Sweat Analysis.

A 27.5 Fj/step SAR Capacitance-to-Digital Converter Based on Correlated Double Sampling

A Portable Electrochemical Measurement Platform for Wearable-Flexible Sweat Sensors

An ECG-on-Chip for Wearable Cardiac Monitoring Devices

A 0.6V 3.8μw ECG/bio-impedance Monitoring IC for Disposable Health Patch in 40nm CMOS

Finger-actuated wireless-charging wearable multifunctional sweat-sensing system for levodopa and vitamin C

The Optimization Of Analog Front-End For Fully Integrated Wearable Sweat Sensor

A multichannel electrochemical all-solid-state wearable potentiometric sensor for real-time sweat ion monitoring

A Wearable Paper‐Based Sweat Sensor for Human Perspiration Monitoring