Abstract:As an excellent representative of all-inorganic perovskite materials, CsPbBr3 has been widely used in high-energy rays or high-energy particles detection for its outstanding high carrier mobility and long diffusion length. The great challenges and opportunities in these fields are crystal growth technology, especially the high-quality and large-sized CsPbBr3 single crystals. In this work, the influences of growth parameters (temperature gradient, growth rate, cooling rate) and thermal stress by the vertical Bridgman method on the quality and performance of CsPbBr3 crystals are systematically studied. The final results show that 10°C cm−1 is the optimized temperature gradient and 0.5 mm h−1 is the suitable growth rate for CsPbBr3 crystal growth. The study also shows that a cooling rate of 10°C h−1 for the general temperature interval and 1°C h−1 for the phase transition temperature interval is helpful to balance crystal growth efficiency as well as crystal quality. Crystal cracks caused by thermal stress as well as crystal adhesion on the ampoule can be effectively solved by depositing a uniform carbon film on the ampoule in advance. The optical, electrical and detection performance are also investigated. The optical characterization in the wavelength region ranging from ultraviolet to infrared indicates the crystal has a low density of deep-level defects and good crystal quality. The resistivity over 109 Ω cm and μτ of electrons over 10−2 cm−2 V−1 proves that the electrical performance of the crystal has met the basic requirement for nuclear radiation detection. The metal–semiconductor–metal structure Ti/Ni/CsPbBr3/Ni/Ti detector fabricated from the optimized CsPbBr3 single crystal has an energy resolution of 12.85% (137Cs, 662 keV). The purpose of this work is to provide a useful guide and reference for the future exploration of repeatable and improvable CsPbBr3 crystal growth technology.

Simulation of the Effect of Neutron Radiation on the Caesium Lead Bromide

Modelling the Response of CLLBC(Ce) and TLYC(Ce) SiPM-Based Radiation Detectors in Mixed Radiation Fields with Geant4

Lead-halide Cs4PbBr6 single crystals for high-sensitivity radiation detection

Study on Photon Beam Imaging Properties of CsPbBr 3 -PP Scintillator: Monte Carlo Simulation Approach

Study on Photon Beam Imaging Properties of CsPbBr3-PP Scintillator: Monte Carlo Simulation Approach

Study on the vertical Bridgman method of melt-grown CsPbBr3 single crystals for nuclear radiation detection

CsPbBr3@PbBrOH 3D/1D Molecular Matrix for a High-Performance Scintillator

Response of LaBr3:Ce Scintillation Detector Itself to Fast Neutrons

The Total Ionizing Dose Effects on Perovskite CsPbBr3 Semiconductor Detector

Characterization of a medium-sized CLLB scintillator: single neutron/gamma detector for radiation monitoring

Simulation study on the factors affecting the detection efficiency of a LaBr3(Ce)detector

Radiation hardness study of BC408 plastic scintillator under 80 MeV proton beam irradiations

Study of the thermal neutron activation of a gamma-ray detector for BNCT dose monitoring

Enhancing High-Voltage Stability of CsPbBr₃ Radiation Detectors Through Surface Treatment and Electrode Replacement

Extreme Γ-Ray Radiation Hardness and High Scintillation Yield in Perovskite Nanocrystals

A feasibility study using an array of LaBr3(Ce) scintillation detectors as a Compton camera for prompt gamma imaging during BNCT

Hadron-Induced Radiation Damage in Fast Heavy Inorganic Scintillators

Study of Boron Coated Straw Detectors for Small Angle Neutron Scattering on Cphs

Evaluation of Scintillator Detection Materials for Application within Airborne Environmental Radiation Monitoring

Experimental study on gamma ray induced light output deterioration in LaBr3:Ce scintillator