Abstract:Lower-limb exoskeletons can aid restoring mobility in people with movement disorders. Cable-driven exoskeletons can offload their actuators away from the human body to reduce the weight imposed on the user and enable precise control of joints. However, ensuring limb coordination through bidirectional motion control of joints using cables raise the technical challenge of preventing the occurrence of undesired cable slackness or counteracting forces between cables. Thus, motivation exists to develop a control design framework that integrates both a joint control loop to ensure suitable limb tracking and a cable control loop to maintain cable tension properly. In this article, a two-layer control structure consisting of high and low-level controllers are developed to ensure a knee-joint exoskeleton system follows the desired joint trajectories and adjusts the cable tension, respectively. A repetitive learning controller is designed for the high-level knee joint tracking objective motivated by the periodic nature of the desired leg swings (i.e., to achieve knee flexion and extension). Low-level robust controllers are developed for a pair of cables, each actuated by an electric motor, to track target motor trajectories composed of motor kinematics and offset angles to mitigate cable slackness. The offset angles are computed using admittance models that exploit measurements of the cable tensions as inputs. Each electric motor switches its role between tracking the knee joint trajectory (i.e., the motor acts as the leader motor to achieve flexion or extension) and implementing the low-level controller (i.e., the motor acts as the follower motor to reduce slackness). Hence, at any time, one motor is the leader and the other is the follower. A Lyapunov-based stability analysis is developed for the high-level joint controller to ensure global asymptotic tracking and the low-level follower controller to guarantee global exponential tracking. The designed controllers are implemented during leg swing experiments in six able-bodied individuals while wearing the knee joint cable-driven exoskeleton. A comparison of the results obtained in two trials with and without using the admittance model (i.e., exploiting cable tension measurements) is presented. The experimental results indicate improved knee joint tracking performance, smaller control input magnitudes, and reduced cable slackness in the trial that leveraged cable tension feedback compared to the trial that did not exploit tension feedback.

Improved Pulley Set-Based Force Sensing Mechanism Used in a Cable-Driven Exoskeleton under Nonlinear Framework

An Upper-Limb Power-Assist Exoskeleton Using Proportional Myoelectric Control

Sensorless model-based tension control for a cable-driven exosuit

Closed-Loop Kinematic and Indirect Force Control of a Cable-Driven Knee Exoskeleton: A Lyapunov-Based Switched Systems Approach

A cable-driven exosuit for upper limbs: design, control, and evaluation

Force Transmission Analysis and Optimization of Bowden Cable on Body in a Flexible Exoskeleton

A Resistance Compensation Control Algorithm for a Cable-Driven Hand Exoskeleton for Motor Function Rehabilitation

Two-Stage Trajectory-Tracking Control of Cable-Driven Upper-Limb Exoskeleton Robots with Series Elastic Actuators: A Simple, Accurate, and Force-Sensorless Method

Development of a soft cable-driven hand exoskeleton for assisted rehabilitation training

Optimal Design of a 3-DOF Cable-Driven Upper Arm Exoskeleton

Study on the Control Method of Knee Joint Human–Exoskeleton Interactive System

Closed-loop Control Design and Motor Allocation for a Lower-limb Cable-driven Exoskeleton: A Switched Systems Approach

Towards Human-like Walking with Biomechanical and Neuromuscular Control Features: Personalized Attachment Point Optimization Method of Cable-Driven Exoskeleton

Tracking control with external force self-sensing ability based on position/force estimators and non-linear hysteresis compensation for a backdrivable cable-pulley-driven surgical robotic manipulator

An untethered cable-driven ankle exoskeleton with plantarflexion-dorsiflexion bidirectional movement assistance

A Hybrid Method Combining Data-Driven and Model-Based Algorithms for External Force-Sensing and Haptics Control of Cable-Pulley-Driven Surgical Robotic Manipulator

Ex Situ Sensing Method for the End-Effector's Six-Dimensional Force and Link's Contact Force of Cable-Driven Redundant Manipulators

Design and Control of the Compact Cable-driven Series Elastic Actuator Module in Soft Wearable Robot for Ankle Assistance

A Planar Cable-Driven Under-Sensing Model to Measure Forces and Displacements

Force Sensing and Compliance Control for a Cable-Driven Redundant Manipulator

Bio-Inspired Cable-Driven Actuation System for Wearable Robotic Devices: Design, Control and Characterization