Abstract:A new type of concrete, namely alkali-activated slag and fly ash blended sea sand recycled aggregate concrete (AASRAC), is developed in this paper. By considering its future service under ocean environment, crack resistance of the new concrete should be emphasized and evaluated rationally. Similar to ordinary concrete, however, size effect would be inevitable in the determined tensile strength and fracture toughness based on traditional continuum mechanics. To address this issue, the intention of this paper is to propose an analytical fracture model to predict the tensile strength f(t), fracture toughness K-IC and energy G(F) by using tests on three-point-bending notched beams of AASRAC. The average aggregate size d(avg) and two discrete numbers beta and beta(w) are introduced to represent the material heterogeneity and discontinuity, respectively. The critical effective crack propagation length and critical crack-tip opening displacement are quantified as the d(avg) multiplied by beta and beta(w), respectively, when the maximum applied load F-max is reached. Closed-form solutions of the size-independent f(t), K-IC and G(F) are then obtained by using the experimentally measured F-max based on boundary effect model. The means, and upper and lower bounds of the fracture parameters with 95% reliability are determined from the normal distribution analysis. Results show that the fracture parameters can be yielded with reasonable accuracy if beta = 1.0 and beta(w) = 1.0. The predicted f(t), K-IC and G(F) are higher as the slag-to-fly ash mass ratio increases in AASRAC. The predicted f(t) based on the proposed model is significantly larger than the traditional splitting tensile strength. The main failure mode of the tested AASRAC beam is that about 80% of the recycled coarse aggregates are fractured due to the improved interfacial micro-structures between the mortar and aggregates. The proposed model can give a rational design method for the new concrete. (C) 2021 Elsevier Ltd. All rights reserved.

A Predictive Model for Determining Shear Strength and Shear Fracture Energy of FRP Bars in Alkali-Activated Slag Seawater Coral Aggregate Concrete

Effect of Aggregate Size on the Axial Compressive Behavior of FRP-Confined Coral Aggregate Concrete

Bond Behavior Between GFRP Bars and Coral Aggregate Concrete

Experimental Investigation on the Bond Performance of Sea Sand Coral Concrete with FRP Bar Reinforcement for Marine Environments

Bond strength and reliability analysis of stainless steel rebar embedded in fiber reinforced coral aggregate concrete

Study on Fracture Properties of Alkali-Activated Slag Seawater Coral Aggregate Concrete

Enhancement of Bond Performance of FRP Bars with Seawater Coral Aggregate Concrete by Utilizing Ecoefficient Slag-Based Alkali-Activated Materials

Flexural Behavior of FRP Bars Reinforced Seawater Coral Aggregate Concrete Beams Incorporating Alkali-Activated Materials

Machine Learning Driven Bond Performance Prediction Between FRP Bars and Coral Aggregate Concrete

A closed-form fracture model to predict tensile strength and fracture toughness of alkali-activated slag and fly ash blended concrete made by sea sand and recycled coarse aggregate

Axial Compressive Behavior of Seawater Coral Aggregate Concrete-Filled Frp Tubes

An Improved Prediction for Bond Strength of Deformed Bars in Concrete Externally Confined with Fiber-Reinforced Polymer

Bond Performance Between BFRP Bars and Alkali-Activated Seawater Coral Aggregate Concrete

Basalt FRP-confined Slag-Based Alkali-Activated Seawater Coral Aggregate Concrete: Concept and Axial Stress-Strain Behavior

Bond-slip Behavior of the FRP Bar-Sea Sand Concrete Interface and Its Effect on the Finite Element Analysis of RC Beam

Bond Performance between Fiber-Wrapped Ribbed Basalt Fiber-Reinforced Polymer Bars and Seawater Sea-Sand Concrete

Shear behaviour of seawater sea-sand coral aggregate concrete beams reinforced with FRP strip stirrups

Study on bond performance between FRP bars and seawater coral aggregate concrete

Fatigue bond behaviour between basalt fibre-reinforced polymer bars and seawater sea-sand concrete

Axial Compressive Behavior of GFRP-confined Seawater Coral Aggregate Concrete Incorporating Slag-Based Alkali-Activated Materials

Bond of FRP bars in fine‐grained alkali‐activated concrete