Abstract:Bond parameters between alkali-activated slag seawater coral aggregate concrete (ASSCAC) and fiber reinforced polymer (FRP) bars are necessary to be determined rationally for future service of the new concrete structures in marine environment. The intention of this paper is to develop a predictive model for determining the realistic local shear strength and shear fracture energy incorporating the heterogeneity and discontinuity in the interface region. First, central pull-out tests were performed to study the bond properties between FRP bars and ASSCAC. Ordinary Portland cement CAC (OPCAC) was prepared for comparison. It is found that the ribs on the bar surfaces were seriously abrased and the extent of damage was more serious in the ASSCAC. Subsequently, a microstructure characteristic parameter was introduced indicating the heterogeneity of the interface region and determined as the rib spacing on the bar surface according to the analysis of failure process. The shear crack propagation was discretized by a discrete number. The local shear strength and shear fracture energy were then linked to the maximum pull-out load via the microstructure characteristic parameter and discrete number. Once the maximum load was given from the test, the two bond parameters were conveniently predicted from each specimen. The results indicated that the predicted local shear strength was apparently higher than the maximum average bond stress which was usually used to represent the local shear strength in traditional methods. As the bond length-to-microstructure characteristic parameter ratio increased, the predicted local shear strength showed a certain reduction but the predicted local shear fracture energy was significantly enhanced because of the reduced boundary effect. Moreover, the predicted bond parameters of the FRP bars in the ASSCAC were generally larger than those in the OPCAC.

Machine Learning Driven Bond Performance Prediction Between FRP Bars and Coral Aggregate Concrete

Machine Learning Prediction of Interfacial Bond Strength of Frp Bars with Different Surface Characteristics to Concrete

The Application of Machine Learning Algorithms to Bond Strength between Steel Rebars and Concrete Using Bayesian Optimization

Bond strength prediction of FRP bars to seawater sea sand concrete based on ensemble learning models

A Predictive Model for Determining Shear Strength and Shear Fracture Energy of FRP Bars in Alkali-Activated Slag Seawater Coral Aggregate Concrete

Hybrid machine learning-based prediction model for the bond strength of corroded Cr alloy-reinforced coral aggregate concrete

Prediction of Bond Strength and Failure Mode of FRP Bars Embedded in UHPC or UHPSSC Utilising Extreme Gradient Boosting Technique

Interpretable Machine Learning Models for Predicting the Bond Strength Between UHPC and Normal-Strength Concrete

Flexural Strength Prediction of Concrete Beams Reinforced with Hybrid FRP and Steel Bars Based on Machine Learning

Use of Interpretable Machine Learning Approaches for Quantificationally Understanding the Performance of Steel Fiber-Reinforced Recycled Aggregate Concrete: from the Perspective of Compressive Strength and Splitting Tensile Strength

Ensemble Machine Learning-Based Approach for Predicting of FRP–Concrete Interfacial Bonding

Interpretable Machine Learning-Based Prediction Model for Concrete Cover Separation of FRP-Strengthened RC Beams

An Improved Prediction for Bond Strength of Deformed Bars in Concrete Externally Confined with Fiber-Reinforced Polymer

Analytical bond strength of deformed bars in concrete confined with transverse reinforcement and FRP

Performance of different machine learning techniques in predicting the flexural capacity of concrete beams reinforced with FRP rods

Evaluating the bond strength of FRP in concrete samples using machine learning methods

Machine Learning Approach to Predict the Strength of Concrete Confined with Sustainable Natural FRP Composites

CFRP-RC fracture strength prediction: A novel approach using deep learning

Prediction of Bond Strength of FRP-Concrete Based on Multiple Linear Regression Method

Estimation of bond strength between UHPC and reinforcing bars using machine learning approaches

Bond Behavior Between GFRP Bars and Coral Aggregate Concrete