Abstract:Abstract During a severe accident in a pressurized water reactor, if the coolant pipe ruptures in a multi-openings compartment, a mixture of hydrogen, vapor, and air migrates and diffuses between compartments, driven by density disparities during the extended period following the cessation of coolant rapid discharge. The same phenomenon occurs during a “wet bypass” in a fusion reactor, a mixture of hydrogen, tritium (HT/HTO), vapor, and air migrates and diffuses between the suppression system, vacuum vessel, and Tokamak gallery. In the scenarios mentioned above, the buoyancy-driven flow resulting from the mixing of light and heavy gases will influence the long-term hydrogen risk and migration of radioactive materials. Previous research has primarily focused on studying the migration behavior of multi-component gas mixtures propelled by jet flow. An experimental device (A4Q-FB) with a multi-openings container was established, to clarify the influence of buoyancy-driven flow on gas migration. The test is carried out with well-controlled boundary conditions, in which, a mixture of helium and vapor with a mass fraction of 2:15 is injected through a vertically downward nozzle into the compartment filled with air. The injection was stopped after 11200 s from the beginning of the experiment, and other boundary conditions were controlled to be unchanged, and the data of the temperature and concentration of the gases inside the container and the flow velocity of the gas mixture in the openings were obtained. In this study, a three-dimensional analysis model for this test was developed, and the predictive accuracy for gas mixture migration and diffusion behavior was assessed. The results indicate a fundamental alignment between the simulation outcomes and the trends observed in the experimental data. This consistency suggests the reliability of the model in the macro-level predictions of phenomena and supports our understanding of the gas mixture migration under buoyancy-driven flow. The simulation results indicate a maximum relative error of 12% in predicting the concentration of vapor at the top and a maximum relative error of 20% in estimating the gas flow velocity within the top openings. The simulation also provides the 3D distribution of velocity and concentration in both container and openings.

Plif Experiment and Verification of Boron Mixed Diffusion Model Driven by Turbulence in Nuclear Reactor

Simulation and Experimental Verification of Boron Diffusion and Mixing in T-Tube Flow

Development and Validation of Boron Diffusion Model in Nuclear Reactor Core Subchannel Analysis

Laser-Driven Proton-Boron Fusions: Influences of the Boron State

Experimental Investigation on Distribution of Boric Acid in a Vertical 1 × 2 Rod Array Channel

Experimental investigation of local boron concentration in a 2 × 2 rod bundle channel under subcooled boiling flow

Boron Transport Model with Physical Diffusion for RELAP5

Development of Boron Dilution Model in COBRA-EN

Numerical Simulation of Inherent Boric Mixing Phenomenon Inside Reactor Annular Down-Comer

Study of boron diffusion models and dilution accidents in nuclear reactor: A comprehensive review

CFD/RELAP5 coupling analysis of the ISP No. 43 boron dilution experiment

Study on Bubbly Flow Behavior in Natural Circulation Reactor by Thermal-Hydraulic Simulation Tests with SF6-Gas and Ethanol Liquid

Integrated modeling of boron powder injection for real-time plasma-facing component conditioning

Experimental analyses and computational simulations of dilution events for an SMR pressurizer test facility

Measurement of Boron Concentration with the Serpentuator System

Numerical Study of Gas Flow and Diffusion Driven by Buoyancy in a Multi-Openings Compartment

Experimental investigations on flow-induced vibration characteristics of fuel rod with an independent channel for small lead-based reactor

Mixing in the Confined Vortical Flow in Non-Aligned T-jets Reactors

Understanding Flow Fouling Deposition and Solute Hideout-Return Behavior at the Phase Change Interface

Experimental simulation on LOCA of a nuclear heating reactor

Experimental Research on the Pressure Response of Gravity Boron Injection System