Abstract:A new generation of red phosphors of complex fluoride matrices activated with Mn4+ has gained a broad interest in getting high color quality and low color temperature of solid-state white light-emitting diodes (WLEDs). However, besides their instability toward moisture, the extremely irregular and nonuniform morphologies of these phosphors have limited their practical industry applications. In the present study, a novel type of K3ScF6:Mn4+ red phosphor with highly regular, uniform, and high color purity was obtained successfully through a facile coprecipitation route under mild conditions. The crystal structure was identified with aids of the powder X-ray diffraction, Rietveld refinement, and density functional theory calculations. The prototype crystallizes in the space group Fm3 m with a cubic structure, and the lattice parameters are fitted well to be a = b = c = 8.4859(8) Å and V = 611.074(2) Å3. The Mn4+ ions occupy Sc3+ sites and locate at the centers of the distorted ScF6 octahedrons. A wide band gap of approximately 6.15 eV can provide sufficient space to accommodate impurity energy levels. Unlike most other Mn4+ ion-activated fluoride phosphors, the as-prepared K3ScF6:Mn4+ phosphors demonstrate highly uniform and regular morphologies with shapes transforming from cube to octahedron with increasing Mn4+ ion concentration. Under blue light excitation, the as-prepared K3ScF6:Mn4+ sample exhibits intense sharp-line red fluorescence (the strongest peak located at 631 nm) with high color purity. An excellent recovery in luminescence upon heating and cooling processes implies high stability of K3ScF6:Mn4+. Furthermore, a warm WLED fabricated with blue GaN chips merged with the mixture of K3ScF6:Mn4+ and the well-known commercial YAG:Ce3+ yellow phosphors exhibits wonderful color quality with lower correlated color temperature (3250 K) and higher color-rendering index ( Ra = 86.4). These results suggest that the K3ScF6:Mn4+ phosphor possesses stupendous potentiality for practical applications.

Manganese activated narrowband red-emitting Cs<sub>2</sub>KInF<sub>6</sub>:Mn<SUP>4+</SUP> phosphor with high colour purity for backlight display

A red-emitting phosphor K5In3F14:Mn4+ and its potential application in the backlighting

Mn<SUP>4+</SUP> doped narrowband red phosphors with short fluorescence lifetime and high color stability for fast-response backlight display application

Highly Regular, Uniform K3ScF6:Mn4+ Phosphors: Facile Synthesis, Microstructures, Photoluminescence Properties, and Application in Light-Emitting Diode Devices

Non-equivalent Mn4+ doping into A(2)NaScF(6) (A = K, Rb, Cs) hosts toward short fluorescence lifetime for backlight display application

Thermally Stable Red-Emitting Ca 18 K 3 Sc(PO 4 ) 14 :Mn 2+ Phosphor and Enhanced Luminescence by Energy Transfer Between Ce 3+ -Eu 2+ -Mn 2

Design, Preparation, and Optical Characteristics of Novel Red Phosphors A(2)NaInF(6):Mn4+(A = K and NH4) for Improving the Performance of WLED

A new path for the synthesis of high quantum efficiency narrow-band-emitting K<sub>2</sub>TiF<sub>6</sub>:Mn<SUP>4+</SUP> phosphor for wide-gamut displays

A novel Mn4+-activated layered oxide-fluoride perovskite-type KNaMoO2F4 red phosphor for wide gamut warm white light-emitting diode backlights

The electronic and optical properties of a narrow-band red-emitting nanophosphor K2NaGaF6:Mn4+ for warm white light-emitting diodes

Ultrafast Green Ion-Exchange and Short Lifetime of Efficient (nh4)3sif7:Mn4+ Millimeter-Sized Single Crystal for Backlight Displays

Green Route Synthesis and Optimized Luminescence of K2SiF6:Mn4+ Red Phosphor for Warm WLEDs

Optical Characteristics, Morphology Evolution and Thermal Stability of Novel Red-Emitting Mn4+-activated K2LiAl1-yGayF6 Solid Solution Phosphors for High-Performance Warm WLED

Mn 4+ non-equivalent doped fluoride phosphors with a short fluorescence decay time for backlighting

K2SiF6:Mn4+ red-luminescent crystals with high external quantum efficiency (EQEmax of 78%) and high thermal quenching temperature (T1/2 > 500 K) enabling high brightness warm white LEDs

Non-equivalent Mn4+ doping in mixed-anion host of K3Na(MoO2F4)2Â·H2O achieving short fluorescence lifetime and intense zero phonon line

A novel red phosphor Cs2NaGaF6:Mn4+ with ultra-strong zero-phonon lines and long wavelength phonon sidebands for high-quality WLEDs

Oxyfluoride K3MoO2F5·2H2O:Mn4+ red phosphor with enhanced luminescence and moisture resistance for WLED indoor lighting and wide gamut display applications

Utilizing the Unique Redox Reaction Between Transition Metal Ions to Improve Mn4+ Doping Concentration and Achieve a High‐Performance Red‐Emitting Cs2NbF6: Mn4+ Phosphor

Mn 4+ -Doped Heterodialkaline Fluorogermanate Red Phosphor with High Quantum Yield and Spectral Luminous Efficacy for Warm-White-Light-Emitting Device Application.

A Novel Red-Emitting Na2NbOF5:Mn4+ Phosphor with Ultrahigh Color Purity for Warm White Lighting and Wide-Gamut Backlight Displays