Proteolytic measurement of mitochondrial aspartate aminotransferase in human serum.

Y. Watazu,H. Okabe,H. Sugiuchi,Y. Uji,Y. Shirahase,N. Kaneda

DOI: https://doi.org/10.1016/0009-9120(90)80023-C

IF: 3.625

1990-04-01

Clinical Biochemistry

Abstract:

What problem does this paper attempt to address?

Non-equivalent Mn4+ doping in mixed-anion host of K3Na(MoO2F4)2Â·H2O achieving short fluorescence lifetime and intense zero phonon line

Qiao Qu,Haiyan Zhang,Haipeng Ji

DOI: https://doi.org/10.1039/d4tc00218k

IF: 6.4

2024-03-12

Journal of Materials Chemistry C

Abstract:The parity-selection rule for the Mn4+ dâ†’d intra-configurational transition, if being relaxed, would generate Mn4+-doped red-emitting phosphor with short fluorescence lifetime, a desired feature when a phosphor is used in a white light-emitting diode (WLED) lamp applied as backlight in displays. We design non-equivalent substitution of Mn4+ for Mo6+ coordinated with Fâˆ’/O2âˆ’ mixed-anions, and obtained K3Na(MoO2F4)2Â·H2O:Mn4+ red phosphor which exhibits fast decay (luminescence lifetime of ~2 ms) and intense zero phonon line (ZPL) emission at 623 nm (ZPL/Î1⁄26 intensity ratio of 65.7% at 300 K) under 470 nm excitation. The local octahedron distortion accounting for the luminescence features was discussed and the crystal field strength and nephelauxetic effect were compared with analogues. The increasing trend of the ZPL/Î1⁄26 intensity ratio from 300 K to 80 K was explained, and the luminescence decay of a series of Mn4+ doping concentrations was studuied. The K3Na(MoO2F4)2Â·H2O:3%Mn4+, when encapsulated with garnet green phosphor on a blue LED, produced a WLED backlight with a wide color gamut above 103.5% of the NTSC standard.

materials science, multidisciplinary,physics, applied
Oxyfluoride K3MoO2F5·2H2O:Mn4+ red phosphor with enhanced luminescence and moisture resistance for WLED indoor lighting and wide gamut display applications

Xiaoyi Liu,Haiming Cheng,Hu Wang,Yanan Li,Guixia Liu,Shengda Liu,Dan Li,Jinxian Wang,Wensheng Yu,Xiangting Dong

DOI: https://doi.org/10.1016/j.jallcom.2023.171314

IF: 6.2

2023-07-01

Journal of Alloys and Compounds

Abstract:K3MoO2F5·2H2O:Mn4+ (KMOFM) oxyfluoride red phosphor was synthesized by co-precipitation strategy. Due to the non-equivalent doping of Mn4+, the phosphor has a strong ZPL emission peak at 623 nm with high color purity (97%). The crystal field strength and nephelauxetic effect were systematically discussed. By optimizing the synthesis process, the optimal doping concentration of Mn4+ was determined to be 0.02. The surface modification of organic reagents (paraffin wax (PW), oleic acid (OA) and methyl silicone oil (MSO)) can effectively enhance the luminescence intensity and moisture resistance of the phosphors, and the possible surface modification mechanism was also proposed. Meanwhile, the as-synthesized sample exhibits distinguished UV light-induced stability, and the surface modification can also improve the photoinduced stability. Moreover, the luminescence thermal stability and the thermal quenching mechanism were analyzed in detail. Furthermore, the CCT and CRI of the warm WLED devices prepared by the red KMOFM/surface-modified phosphors and yellow Y3Al5O12:Ce3+ phosphor are improved obviously, indicating that the prepared sample is a promising red phosphor applied to WLED lighting field. Noticeably, based on the characteristics of high PLQY (63.09%), high color purity (97%) and short fluorescence lifetime (< 4 ms) of the phosphor, we also fabricated a WLED device with wide color gamut (105.1% NTSC value), indicating that the phosphor can also be well applied to the field of wide color gamut fast response backlight display, which greatly expands the application value of the phosphor.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Insight into a Novel Rare-Earth-free Red-Emitting Phosphor Li3Mg2NbO6:Mn4+: Structure and Luminescence Properties

Xicheng Wang,Xiaopeng Zhou,Yaxin Cao,Qi Wei,Zhengyan Zhao,Yuhua Wang

DOI: https://doi.org/10.1111/jace.16527

IF: 4.186

2019-01-01

Journal of the American Ceramic Society

Abstract:Red phosphor is indispensable to achieve warm white light in the white light diode (WLED) application. However, the current red phosphors suffer from high cost and harsh synthesis conditions. In this study, an oxide-based rare-earth-free red-emitting phosphor Li3Mg2NbO6:Mn4+ (LMN:Mn4+) has been successfully synthesized by a simple solid-state reaction method. The relationship between crystal structure and luminescence was investigated in detail. The site occupancy of the doping Mn4+ ion in the LMN host has been discussed from the point of bond valence sum. How the coordination environment of doping Mn4+ affects the energy level of doping Mn4+ ion has been illustrated via the Tanabe-Sugano energy-level diagram. Moreover, warm white light has been obtained using LMN:Mn4+ as compensator to the YAG:Ce3+.
A Novel Red-Emitting Na2NbOF5:Mn4+ Phosphor with Ultrahigh Color Purity for Warm White Lighting and Wide-Gamut Backlight Displays

Jingshan Hou,Wenxiang Yin,Langping Dong,Yang Li,Yufeng Liu,Zhifu Liu,Guoying Zhao,Ganghua Zhang,Yongzheng Fang

DOI: https://doi.org/10.3390/ma14185317

IF: 3.4

2021-09-15

Materials

Abstract:In this work, a novel red-emitting oxyfluoride phosphor Na2NbOF5:Mn4+ with an ultra-intense zero-phonon line (ZPL) was successfully synthesized by hydrothermal method. The phase composition and luminescent properties of Na2NbOF5:Mn4+ were studied in detail. The photoluminescence excitation spectrum contains two intense excitation bands centered at 369 and 470 nm, which match well with commercial UV and blue light-emitting diode (LED) chips. When excited by 470 nm blue light, Na2NbOF5:Mn4+ exhibits red light emission dominated by ZPL. Notably, the color purity of the Na2NbOF5:Mn4+ red phosphor can reach 99.9%. Meanwhile, the Na2NbOF5:Mn4+ phosphor has a shorter fluorescence decay time than commercial K2SiF6:Mn4+, which is conducive to fast switching of images in display applications. Profiting from the intense ZPL, white light-emitting diode (WLED) with high color rendering index of Ra = 86.2 and low correlated color temperature of Tc = 3133 K is realized using yellow YAG:Ce3+ and red Na2NbOF5:Mn4+ phosphor. The WLED fabricated using CsPbBr3 quantum dots (QDs) and red Na2NbOF5:Mn4+ phosphor shows a wide color gamut of 127.56% NTSC (National Television Standard Committee). The results show that red-emitting Na2NbOF5:Mn4+ phosphor has potential application prospects in WLED lighting and display backlight.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Intense red-emitting NaYSiO4: Eu3+, Mo6+ phosphors for white light-emitting diodes

Yan Wen,Yuhua Wang,Feng Zhang,Bitao Liu,Zhengyan Zhao,Jia Zhang,Zhigang Yang

DOI: https://doi.org/10.1149/1.3600350

IF: 3.9

2011-01-01

Journal of The Electrochemical Society

Abstract:Novel red phosphors Na(Y1-xEux)(Si1-yMoy)O-4 were developed for white light emitting diode applications and their luminescent properties were investigated in detail. The results indicated that NaY1-xEuxSiO4 samples can be effectively excited by near-ultraviolet light (393 nm) and the introduction of Mo6+ strongly enhanced the emission intensity of Eu3+ when samples were excited under 393 nm, which was ascribed to the improvement of absorption intensities of F-7(0) -> L-5(6) transitions. Besides, the quantum efficiencies of a series of Na(Y1-xEux)(Si1-yMoy)O-4 samples were calculated according to the average decay lifetimes. The composition-optimized Na(Y0.7Eu0.3)(Si0.7Mo0.3)O-4 sample exhibited the red light emission brightly with the chromaticity coordinates of (0.66, 0.34), whose integral intensity was calculated to be about 2.16 times of that of the commercial red phosphor Y2O3: Eu3+. Thus, Na(Y1-xEux)(Si1-yMoy)O-4 can be as red-phosphor candidates for white light-emitting diodes devices. (C) 2011 The Electrochemical Society. [DOI: 10.1149/1.3600350] All rights reserved.
Highly Regular, Uniform K3ScF6:Mn4+ Phosphors: Facile Synthesis, Microstructures, Photoluminescence Properties, and Application in Light-Emitting Diode Devices

Hong Ming,Shuifu Liu,Lili Liu,Jiaqing Peng,Junxiang Fu,Fu Du,Xinyu Ye

DOI: https://doi.org/10.1021/acsami.8b01885

2018-06-13

Abstract:A new generation of red phosphors of complex fluoride matrices activated with Mn4+ has gained a broad interest in getting high color quality and low color temperature of solid-state white light-emitting diodes (WLEDs). However, besides their instability toward moisture, the extremely irregular and nonuniform morphologies of these phosphors have limited their practical industry applications. In the present study, a novel type of K3ScF6:Mn4+ red phosphor with highly regular, uniform, and high color purity was obtained successfully through a facile coprecipitation route under mild conditions. The crystal structure was identified with aids of the powder X-ray diffraction, Rietveld refinement, and density functional theory calculations. The prototype crystallizes in the space group Fm3 m with a cubic structure, and the lattice parameters are fitted well to be a = b = c = 8.4859(8) Å and V = 611.074(2) Å3. The Mn4+ ions occupy Sc3+ sites and locate at the centers of the distorted ScF6 octahedrons. A wide band gap of approximately 6.15 eV can provide sufficient space to accommodate impurity energy levels. Unlike most other Mn4+ ion-activated fluoride phosphors, the as-prepared K3ScF6:Mn4+ phosphors demonstrate highly uniform and regular morphologies with shapes transforming from cube to octahedron with increasing Mn4+ ion concentration. Under blue light excitation, the as-prepared K3ScF6:Mn4+ sample exhibits intense sharp-line red fluorescence (the strongest peak located at 631 nm) with high color purity. An excellent recovery in luminescence upon heating and cooling processes implies high stability of K3ScF6:Mn4+. Furthermore, a warm WLED fabricated with blue GaN chips merged with the mixture of K3ScF6:Mn4+ and the well-known commercial YAG:Ce3+ yellow phosphors exhibits wonderful color quality with lower correlated color temperature (3250 K) and higher color-rendering index ( Ra = 86.4). These results suggest that the K3ScF6:Mn4+ phosphor possesses stupendous potentiality for practical applications.
Warm-white-light Emission from Eu2+/Mn2+ -Coactivated NaSrPO4 Phosphor Through Energy Transfer

Yao Li,Hairong Li,Bitao Liu,Jia Zhang,Zhengyan Zhao,Zhigang Yang,Yan Wen,Yuhua Wang

DOI: https://doi.org/10.1016/j.jpcs.2012.09.020

IF: 4.383

2012-01-01

Journal of Physics and Chemistry of Solids

Abstract:A series of white-light-emitting NaSrPO4:Eu2+, Mn2+ phosphors were successfully synthesized by solid-state reaction and their photoluminescence properties were investigated. The NaSrPO4:Eu2+, Mn2+ phosphor system exhibits a broad excitation band in the wavelength range of 250–420nm, which is well-matched with ultraviolet (UV) light-emitting-diode (LED) chips (typically 365nm). As a result of fine-tuning of the emission composition of the Eu2+ and Mn2+ ions, warm-white-light emission can be realized in a single host lattice under 365nm excitation. Efficient resonant energy transfer from the Eu2+ to Mn2+ ions has been observed. The energy transfer efficiency and critical distance were calculated. The results indicate that the developed phosphor can be used as a potential candidate for white LEDs.
Core professional nursing values of baccalaureate nursing students who are men

Bonnie J Schmidt

DOI: https://doi.org/10.1177/0969733015579310

IF: 3.344

2016-09-01

Nursing Ethics

Abstract:Background: The perceptions of core professional nursing values of men in baccalaureate nursing programs are poorly understood. Objective: The study purpose was to understand and interpret the meaning of core professional nursing values to male baccalaureate nursing students. Research design and context: One-to-one interviews were conducted with male nursing students from a public university in the Midwest, following interpretive phenomenology. Ethical considerations: Measures to protect participants included obtaining Institutional Review Board approval, obtaining signed informed consent, and maintaining confidentiality. Findings: The study revealed five themes and several subthemes under an overarching finding of caring. Acquisition of professional nursing values began prior to the nursing program and continued to varying degrees throughout the program. Discussion: Several implications are offered for nursing education, nursing practice, research, and public policy. These include identification of common values, teaching-learning strategies, inclusive environments, teamwork, and conflict resolution. Conclusion: Caring was revealed using a metaphor of a puzzle.
Synthesis, optical characteristics and thermal stability of Mn4+-doped Na3GaF6 red-emitting phosphor for high-performance warm WLED

Yuchen Tao,Yunfang Bai,Long Li,Junze Tong,Jingjing Zhang,Yuting Xu,Hai Lin,Feng Hong

DOI: https://doi.org/10.1016/j.molstruc.2023.137237

IF: 3.841

2024-03-01

Journal of Molecular Structure

Abstract:Nowadays, Mn4+-activated fluoride red phosphors with high color purity, strong zero phonon line emission and relatively short decay time are crucial for improving the optical performance of WLED and emerging applications. In this work, a series of red-emitting Mn4+-activated fluoride phosphors in consideration of the non-equivalent substitution of Mn4+ for Ga3+ in the Na3GaF6 host are synthesized via the coprecipitation method at room temperature. The use of different reaction solvents successfully regulates the morphology, size and luminescence intensity of the phosphor. Under blue light excitation, Na3GaF6:Mn4+ sample shows a bright narrow-band red emission with exceptional correlated color temperature (4029 K). Moreover, the emission of strong zero phonon line induces the outstanding color purity of red light (93%). In addition, the critical concentration of Mn4+ is determined to be 0.04 and the concentration quenching mechanism is also systematically discussed. Noticeably, when Na3GaF6:Mn4+ phosphor achieves maximum fluorescence emission, its fluorescence lifetime value is only 3.48 ms. Additionally, the theoretical calculated results demonstrate that Na3GaF6 host can provide strong crystal field strength for Mn4+, and the Racah parameters (B and C) and nephelauxetic ratio (β 1) are used to evaluate the nephelauxetic effect of Mn4+, which is compared with other types of Mn4+-activated phosphors. The activation energy, chromaticity shift and chromaticity coordinate variation are systematically calculated to analyze the thermal stability of Na3GaF6:Mn4+ red phosphor. Meanwhile, by employing the as-prepared phosphor Na3GaF6:Mn4+ as a red component, a high-performance warm WLED shows a full spectrum emission, and the corresponding cold white light emission is also transformed into the warm white light emission (CCT = 4224 K, Ra = 89.1 and LE = 111.72 lm/W). Moreover, under high driving current, such WLED exhibits stable output light efficiency. These results suggest that Na3GaF6:Mn4+ as red phosphor has a stupendous potential for warm WLED in indoor lighting.

chemistry, physical
K2SiF6:Mn4+ red-luminescent crystals with high external quantum efficiency (EQEmax of 78%) and high thermal quenching temperature (T1/2 > 500 K) enabling high brightness warm white LEDs

Wenrui Zhang,Yayun Zhou,Ce Shi,Jiajun Ren,Liying Zhang,Haipeng Ji

DOI: https://doi.org/10.1039/d4tc04035j

IF: 6.4

2024-11-30

Journal of Materials Chemistry C

Abstract:Mn4+-activated fluoride phosphor is one of the crucial red-emitting phosphors for white lighting systems driven by light-emitting diodes (LEDs). In this study, we successfully synthesized high-quality K2Si1-xF6:xMn4+ (x = 0.03–0.70) crystals, measuring approximately 1 mm in size, through a new cooling-induced crystallization method. These crystals exhibit narrow line-type photoluminescence emission bands and exceptional optical properties, including high absorption efficiency up to 93.5% and external quantum efficiency up to 68.9%, which are among the record values for Mn4+-doped fluoride phosphors. Furthermore, they exhibit a notably elevated luminescence thermal quenching temperature (T1/2) exceeding 500 K. A comprehensive investigation into the phase transformation, zero-phonon line tuning, and fluorescence decay behavior as a function of increasing Mn concentrations was also conducted. Practical applications were demonstrated through the fabrication of warm white LEDs, integrating a blue LED with garnet yellow phosphor and the as-synthesized K2Si1-xF6:xMn4+ (nominal x of 0.20) crystals as the red component. The white LEDs exhibit an impressive luminous efficacy of 192.1 lm·W−1, a color rendering index of Ra = 87.5 and R9 = 62 under a 20 mA driving current. Our study highlights the outstanding properties of Mn4+-doped fluoride crystals with bulk size rather than conventional powdery form and the potential of the cooling-induced crystallization method for cultivating the crystals.

materials science, multidisciplinary,physics, applied
Morphology controllable BaNbF5.5(OH)1.5:Mn4+ red phosphor with strong zero phonon line for WLED application

Xiaoyi Liu,Haiming Cheng,Hu Wang,Yanan Li,Yunkai Dong,Feng Hong,Guixia Liu,Dan Li,Xiangting Dong,Jinxian Wang,Wensheng Yu

DOI: https://doi.org/10.1016/j.jallcom.2023.168806

IF: 6.2

2023-05-01

Journal of Alloys and Compounds

Abstract:A hydroxy fluoride red phosphor BaNbF5.5(OH)1.5:Mn4+ with dual morphology was designed and manufactured by co-precipitation strategy. The crystal phase structure, controlled morphology and photoluminescence performances were systematically investigated. The Mn4+ non-equivalent doped hydroxy fluoride phosphor has similar luminescence performance to fluoride phosphors, and it is worth noting that it presents a very strong zero phonon line (ZPL) at ∼629 nm at blue light excitation and has high color purity (98.5%). Crystal field intensity (D q ), Racah parameters (B and C) and nephelauxetic effect ratio parameter β 1 of the sample were calculated and analyzed, the results indicate that the BaNbF5.5(OH)1.5 matrix provides a strong crystal field environment for Mn4+. The effects of the experimental conditions on the morphology of the phosphors were analyzed, and optimal synthetic conditions were determined. Because of the short fluorescence decay lifetime (τ < 4 ms), this red phosphor may be a prospective red emitting candidate for backlight displays. Moreover, the as-prepared BaNbF5.5(OH)1.5:Mn4+ red phosphor possesses distinguished UV light-induced stability. Thermal stability and hydrophobic stability of the phosphor were analyzed. Thanks to the strong ZPL, WLED device prepared with this phosphor can produce warm white light and show remarkable photoelectric properties, with a color rendering index (CRI, Ra) of up to 92.5 and a correlated color temperature (CCT, Tc) as low as 3944 K. The results indicate that the red phosphor BaNbF5.5(OH)1.5:Mn4+ has application possibilities in WLED illumination and display backlighting.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Orderly‐Layered Tetravalent Manganese‐Doped Strontium Aluminate Sr4Al14O25:Mn4+: an Efficient Red Phosphor for Warm White Light Emitting Diodes

Mingying Peng,Xuewen Yin,Peter A. Tanner,Chujun Liang,Pengfei Li,Qinyuan Zhang,Jianrong Qiu

DOI: https://doi.org/10.1111/jace.12391

IF: 4.186

2013-01-01

Journal of the American Ceramic Society

Abstract:Searching for an efficient non rare earth‐based oxide red phosphor, particularly excitable by light in the wavelength from 380 to 480 nm and unexcitable by green light, is essential for the development of warm white light emitting diodes ( WLED s). Here, we report a promising and orderly‐layered candidate: Sr 4 Al 14 O 25 : Mn 4+ with CIE color coordinates (0.722, 0.278). It has higher luminescence efficiency particularly upon blue excitation and is much cheaper than the commercial red phosphor 3.5 MgO ·0.5 MgF 2 · GeO 2 : Mn 4+ ( MMG : Mn 4+ ). In sharp contrast to Eu 2+ ‐doped (oxy)nitrides, the phosphor can be synthesized by a standard solid‐state reaction at 1200°C in air. The effects of flux boron content, environment, and preparation temperature, sintering dwelling time as well as Mn concentration have been systematically investigated for establishing the optimal synthesis conditions. The low temperature emission spectra reveal that there are at least three types of Mn 4+ ions in Sr 4 Al 14 O 25 : Mn 4+ due to the substitution for the distorted octahedral Al 3+ sites. The AlO 6 layers where Mn 4+ prefers to reside are well separated from one another by AlO 4 tetrahedra in one dimension parallel to axis a . This scenario can efficiently isolate Mn 4+ ions from local perturbations, thereby enabling the high efficiency of luminescence. The energy transfer rates and mechanism are discussed.
Novel Mn4+-activated fluoride red phosphors induced by alkaline metal ions replacement: Green synthesis, luminescence enhancement, high stability and application in warm WLED

Junze Tong,Long Li,Haiqing Su,Feng Hong,Edwin Yue Bun Pun,Hai Lin

DOI: https://doi.org/10.1016/j.ceramint.2023.08.295

IF: 5.532

2023-08-01

Ceramics International

Abstract:Red-emitting Mn4+-doped fluoride phosphors are promising fluorescent material for use in high-performance warm white light emitting diodes (WLEDs). However, Low stability and non-green synthesis method limit the development and commercialization of such phosphor. Herein, a series of novel (Li/Na/Cs)0.4Ba0.8SiF6:Mn4+ phosphors with optimized fluorescence properties induced by alkaline metal ions replacement are successfully synthesized via a green and eco-friendly approach. Under the irradiation of 460 nm blue light, Cs0.4Ba0.8SiF6:Mn4+ red phosphor with narrow band emission peak has the best optical performance. The optimal doping concentration of Mn4+ in Cs0.4Ba0.8SiF6 host and the reason for concentration quenching are systematically analyzed. Furthermore, the moisture resistance and thermal stability of this phosphor are discussed. After being soaked in deionized water for 90 min, the PL intensity of Cs0.4Ba0.8SiF6:Mn4+ phosphor can maintain at 40% of that in air, which is 4 times higher than commercial K2SiF6:Mn4+. At the operating temperature of LED (423 K), Cs0.4Ba0.8SiF6:Mn4+ red phosphor can exhibit stable light output intensity and color. A warn WLED with low correlated color temperature of 4336 K, high color rendering index of 88.4 and high lumen efficiency of 105.96 lm/W is fabricated via using Cs0.4Ba0.8SiF6:Mn4+ phosphor as a component of red-light, and the warm WLED can maintain stable output even at high driving currents. Overall, the alkali metal ion replacement and green synthesis strategies have opened up a new perspective for the synthesis of efficient Mn4+-doped fluoride phosphors, which has dual benefits for optimizing the performance of WLED and environmental protection.

materials science, ceramics
Mn4+-activated Sc-based Hexafluoride Red Phosphor K5Sc3F14: Synthesis, Luminescence, and Its Applications in Blue-Pump WLEDs

Zhenjuan Duan,Shengchun Yang,Yu Chen,Yan Zhou,Kan Hu,Fangfang Hao,Yong Liu,Xujun He,Xiaodong Wen

DOI: https://doi.org/10.1016/j.saa.2024.125382

2024-01-01

Abstract:Due to the advantages of low phonon energy, structural diversity, excellent thermal stability and optical properties, fluoride compounds have sparked considerable research attention. On this foundation, a novel red-emitting phosphor, K5Sc3F14:Mn4+ (abbreviated as KSF:Mn4+), was successfully designed and synthesized via a conventional co-precipitation process. The phosphor was comprehensively analyzed in terms of its phase, structure, morphology, elemental composition, and optical performance. Under blue light (473 nm) excitation, seven discernible emission peaks appear at 599, 609, 613, 622, 630, 634, and 647 nm, which can be attributed to the 2Eg to 4A2g transition of the Mn4+ ions. Furthermore, the optimal molar ratio of K5Sc3F14:K2MnF6 and crystal-field parameters (CFPs) are amply discussed. Ultimately, a warm WLED lamp with a high CRI (Ra = 87.5) and a low CCT (3289 K) was successfully created through the combination of a synthesized KSF:Mn4+ phosphor and a well-known YAG:Ce3+ phosphor, demonstrating that the developed phosphor is an appealing red component for high-performance warm white illumination.
Orderly-layered tetravalent manganese-doped strontium aluminate Sr 4 Al 14 O 25: Mn 4+: An efficient red phosphor for warm white light emitting diodes

Mingying Peng,Xuewen Yin,Peter A. Tanner,Chuqi Liang,Pengfei Li,Qinyuan Zhang,Jianrong Qiu

DOI: https://doi.org/10.1111/jace.12391

IF: 4.186

2013-01-01

Journal of the American Ceramic Society

Abstract:Searching for an efficient non rare earth-based oxide red phosphor, particularly excitable by light in the wavelength from 380 to 480nm and unexcitable by green light, is essential for the development of warm white light emitting diodes (WLEDs). Here, we report a promising and orderly-layered candidate: Sr4Al14O25:Mn4+ with CIE color coordinates (0.722, 0.278). It has higher luminescence efficiency particularly upon blue excitation and is much cheaper than the commercial red phosphor 3.5MgO<bold>0</bold>.5MgF2GeO2:Mn4+ (MMG:Mn4+). In sharp contrast to Eu2+-doped (oxy)nitrides, the phosphor can be synthesized by a standard solid-state reaction at 1200 degrees C in air. The effects of flux boron content, environment, and preparation temperature, sintering dwelling time as well as Mn concentration have been systematically investigated for establishing the optimal synthesis conditions. The low temperature emission spectra reveal that there are at least three types of Mn4+ ions in Sr4Al14O25:Mn4+ due to the substitution for the distorted octahedral Al3+ sites. The AlO6 layers where Mn4+ prefers to reside are well separated from one another by AlO4 tetrahedra in one dimension parallel to axis a. This scenario can efficiently isolate Mn4+ ions from local perturbations, thereby enabling the high efficiency of luminescence. The energy transfer rates and mechanism are discussed.
Large Negative-Thermal-Quenching Effect in Phonon-Induced Light Emissions in Mn4+-Activated Fluoride Phosphor for Warm-White Light-Emitting Diodes.

Fei Tang,Zhicheng Su,Honggang Ye,Wenpei Gao,Xiaoqing Pan,Shijie Xu

DOI: https://doi.org/10.1021/acsomega.8b01127

IF: 4.1

2018-01-01

ACS Omega

Abstract:Currently, hunting for anti-temperature-degradation high-efficiency phosphors has become crucially significant for fabricating high-brightness phosphor-converted white light-emitting diodes (pc-WLEDs). Herein, we show that photoluminescence in a kind of full-solution-processed K2SiF6:Mn4+ red phosphor exhibits an extraordinarily large negative thermal quenching property. For instance, under the excitation of 477 nm laser light, the sample photoluminescence intensity amazingly increases by 347-fold when the temperature is increased from 4 to 477 K. The temperature-driven transition probability enhancement of the phonon-induced luminescence around Mn4+ ions in the phosphor is argued to be responsible for the large negative-thermal-quenching phenomenon. We also demonstrate a pc-WLED with R a of 82 and correlated color temperature of 2701 K by using the K2SiF6:Mn4+ red phosphor + commercial yellow phosphor of YAG:Ce3+.
Designed synthesis, morphology evolution and enhanced photoluminescence of a highly efficient red dodec-fluoride phosphor, Li3Na3Ga2F12:Mn4+, for warm WLEDs

Jun Lin,Mengmeng Zhu,Hongzhou Lian,Yuexiao Pan,Ya-shih Huang

DOI: https://doi.org/10.1039/C7TC04878E

2018-01-18

Abstract:Red phosphors of the Mn4+ doped dodec-fluoride Li3Na3Ga2F12:Mn4+ (LNGF:Mn) with various morphologies have been synthesized from K2MnF6, LiF, NaF and Ga2O3 in HF at room temperature with excess LiF and NaF relative to the stoichiometric composition of LNGF:Mn. The formation mechanism of the red phosphor LNGF:Mn has been discussed based on detailed experimental results compared with that of the identified phosphor Li3Na3Al2F12:Mn4+ (LNAF:Mn). The optical properties of LNGF:Mn have been systematically investigated and compared with those of red phosphors Li3GaF6:Mn4+ (LGF:Mn), Na3GaF6:Mn4+ (NGF:Mn) and LNAF:Mn in detail. It is observed that the as-obtained phosphor LNGF:Mn exhibits superior properties in chromaticity coordinates as well as a high luminescence efficiency with a strong potential to enhance the performance of solid-state lighting. The HF-concentration-dependent morphologies of the phosphor LNGF:Mn have been investigated by scanning electron microscopy (SEM). The luminescence of the phosphor LNGF:Mn has been enhanced by optimizing the synthetic parameters, such as the concentrations of HF and K2MnF6. The white light-emitting diode (WLED) encapsulated with the as-obtained red phosphor LNGF:Mn and a commercial yellow one, Y3Al5O12:Ce3+ (YAG:Ce), on a GaN chip produces a warm white light with a color rendering index (CRI) of 91.32 at a correlated color temperature (CCT) of 3986.08 K.

Physics,Materials Science
Synthesis of an efficient Mn4+-doped fluoride red phosphor with excellent fluorescence stability by green synthesis method for warm WLED

Fengxi Hu,Yizheng Hu,Junze Tong,Long Li,Feng Hong,Jingjing Zhang,Yuting Xu,Hai Lin

DOI: https://doi.org/10.1016/j.optmat.2023.114129

IF: 3.754

2023-08-01

Optical Materials

Abstract:Currently, Mn4+-doped fluoride phosphors have become a research hotspot, which can help compensate for the missing red component in cold white light-emitting diodes (WLEDs). However, significant synthesis defects limit the development of such fluorescent powders due to the use of highly toxic solvent HF. To improve this situation, a simple green synthesis method should be explored to synthesize Mn4+-activated fluoride phosphor. In this study, a series of red-emitting Mn4+-activated BaTiF6 phosphors are successfully synthesized via the non-toxic reaction system (HNO3/HCl + NH4F). Its crystal structure, morphology, optical characteristics and thermal stability are systematically evaluated. Under blue light excitation, BaTiF6:Mn4+ exhibits a bright narrow-band red emission with exceptional correlated color temperature (3909 K) and color purity (90%). Additionally, the critical concentration of Mn4+ is determined to be 0.03 and the concentration quenching mechanism is also systematically discussed. By calculating the crystal field strength (D q), Racah parameters (B and C) and nephelauxetic effect ratio parameter β 1, it is confirmed that BaTiF6 host can provide a strong crystal field environment for Mn4+. Moreover, these results are compared with other matrix materials. Intriguingly, the optimal sample exists satisfactory thermal stability, whose fluorescence intensity at 423 K retains 49% of that at 298 K and the activation energy reaches up to 0.925 eV. In addition, the chromaticity shift and chromaticity coordinate variation are calculated as 17 × 10−3 and (−0.0063, 0.0063), respectively. Meanwhile, the feasibility of the as-fabricated WLEDs for interior illumination is examined. A high-performance warm WLED with low correlated color temperature (CCT = 4470 K) and high color rendering index (Ra = 88.3) is achieved by using BaTiF6:Mn4+ as a red-emitting material, moreover, WLED exhibits strong output stability under high driving current. The findings of this work provide a comprehensive understanding for rational design of high-performance Mn4+-activated fluoride red phosphors through a simple green synthesis method.

materials science, multidisciplinary,optics
Na0.2la0.2sr1.6wo6:Mn4+: an Efficient Far-Red-Emitting Phosphor Via a Cation-Pair Partial Substitution

xinyue liu,Xinyong Gong,Kang Cheng,Weichao Huang,Chaoyong Deng

DOI: https://doi.org/10.2139/ssrn.4254761

2022-01-01

SSRN Electronic Journal

Abstract:A novel far-red emitting phosphor Na0.2La0.2Sr1.6MgWO6: Mn4+ can be fabricated by high-temperature solid-state reaction. Photoluminescence excitation and photoluminescence spectra of this phosphor were analyzed in detail. Effective far-red light peaking at 691 nm was observed when the phosphors were excited by 350 nm or 467 nm. By using a [Na+-La3+] unit substituting [Sr2+-Sr2+] unit partially, the far-red emission intensity of Sr2MgWO6:0.006Mn4+ can be improved about 6.5 times. Moreover, thermal stability of the optimized co-doped phosphor was investigated by thermal luminescence spectra and the value of I373K/I298K. Finally, there are a broad spectral overlap between the emission band of Na0.2La0.2Sr1.6MgWO6: Mn4+ phosphors and the absorption band of phytochrome PFR under near-ultraviolet light spectrum. Therefore, the obtained phosphors Na0.2La0.2Sr1.6MgWO6: Mn4+ have potential to be a new type far-red luminescent powder for indoor plant growth LEDs.
A red-emitting phosphor K5In3F14:Mn4+ and its potential application in the backlighting

Jiaojiao Yang,Qingmei Fan,Jie Li,Yanqing Ye,Qiang Zhou,Yayun Zhou,Zhengliang Wang

DOI: https://doi.org/10.1016/j.optmat.2022.112223

IF: 3.754

2022-04-01

Optical Materials

Abstract:A red-emitting phosphor with a short fluorescence lifetime plays an important role in LED backlighting. Herein, new red phosphor K5In3F14:Mn4+ (0.59%) with a tetragonal structure was prepared with the non-equivalent doping of Mn4+. The typical luminescent behaviors of Mn4+ can be observed from the phosphors. Different from the fluoride phosphors with the equivalent doping of Mn4+, K5In3F14:Mn4+ (0.59%) has a short decay time (2.74 ms). The white LED fabricated with K5In3F14:Mn4+ (0.59%) and commercial β-SiALON:Eu2+ emits bright white light under a 20 mA current, and its color gamut is up to 103% of the National Television System Committee (NTSC) standard value. So, K5In3F14:Mn4+ (0.59%) is a potential red component for LED backlighting.

materials science, multidisciplinary,optics

Proteolytic measurement of mitochondrial aspartate aminotransferase in human serum.

Non-equivalent Mn4+ doping in mixed-anion host of K3Na(MoO2F4)2Â·H2O achieving short fluorescence lifetime and intense zero phonon line

Oxyfluoride K3MoO2F5·2H2O:Mn4+ red phosphor with enhanced luminescence and moisture resistance for WLED indoor lighting and wide gamut display applications

Insight into a Novel Rare-Earth-free Red-Emitting Phosphor Li3Mg2NbO6:Mn4+: Structure and Luminescence Properties

A Novel Red-Emitting Na2NbOF5:Mn4+ Phosphor with Ultrahigh Color Purity for Warm White Lighting and Wide-Gamut Backlight Displays

Intense red-emitting NaYSiO4: Eu3+, Mo6+ phosphors for white light-emitting diodes

Highly Regular, Uniform K3ScF6:Mn4+ Phosphors: Facile Synthesis, Microstructures, Photoluminescence Properties, and Application in Light-Emitting Diode Devices

Warm-white-light Emission from Eu2+/Mn2+ -Coactivated NaSrPO4 Phosphor Through Energy Transfer

Core professional nursing values of baccalaureate nursing students who are men

Synthesis, optical characteristics and thermal stability of Mn4+-doped Na3GaF6 red-emitting phosphor for high-performance warm WLED

K2SiF6:Mn4+ red-luminescent crystals with high external quantum efficiency (EQEmax of 78%) and high thermal quenching temperature (T1/2 > 500 K) enabling high brightness warm white LEDs

Morphology controllable BaNbF5.5(OH)1.5:Mn4+ red phosphor with strong zero phonon line for WLED application

Orderly‐Layered Tetravalent Manganese‐Doped Strontium Aluminate Sr4Al14O25:Mn4+: an Efficient Red Phosphor for Warm White Light Emitting Diodes

Novel Mn4+-activated fluoride red phosphors induced by alkaline metal ions replacement: Green synthesis, luminescence enhancement, high stability and application in warm WLED

Mn4+-activated Sc-based Hexafluoride Red Phosphor K5Sc3F14: Synthesis, Luminescence, and Its Applications in Blue-Pump WLEDs

Orderly-layered tetravalent manganese-doped strontium aluminate Sr 4 Al 14 O 25: Mn 4+: An efficient red phosphor for warm white light emitting diodes

Large Negative-Thermal-Quenching Effect in Phonon-Induced Light Emissions in Mn4+-Activated Fluoride Phosphor for Warm-White Light-Emitting Diodes.

Designed synthesis, morphology evolution and enhanced photoluminescence of a highly efficient red dodec-fluoride phosphor, Li3Na3Ga2F12:Mn4+, for warm WLEDs

Synthesis of an efficient Mn4+-doped fluoride red phosphor with excellent fluorescence stability by green synthesis method for warm WLED

Na0.2la0.2sr1.6wo6:Mn4+: an Efficient Far-Red-Emitting Phosphor Via a Cation-Pair Partial Substitution

A red-emitting phosphor K5In3F14:Mn4+ and its potential application in the backlighting