Abstract:Battery thermal management system (BTMS) is of great significance to keep battery of new energy vehicle (NEV) within favorable thermal state, which attracts extensively attention from researchers and automobile manufacturers. As one BTMS scheme, pumped two‐phase system displays excellent cooling capacity owing to large amount of latent heat usage, while there is limited research efforts focusing on the feasibility of the BTMS scheme. This paper experimentally investigates thermal performance of a pumped two‐phase BTMS heated by a dummy battery with relative high heat fluxes. The effects of heat fluxes, flow rates and cold source temperatures on thermal performance have been studied and conclusions have been drawn accordingly. The results show that the thermal performance of the system is generally enhanced with the increase of the refrigerant flow rates. When the heat flux and cold source temperature are 0.11 W/cm2 and 10°C, respectively, tavg and △tmax are decreased by 3.4°C and 0.5°C, respectively, when the refrigerant flow rate is increased from 0.20 to 1.67 L/min. Meanwhile, heat transfer coefficient is also improved with an increase of the flow rates, while the enhancements become less obvious under high heat flux. In addition, the tavg and △tmax of cold plate surface are increased when the heat flux is elevated, while the tavg at the low flow rate is increased slightly. However, the increase of △tmax is more obvious at the low flow rate, compared to that at high flow rate. When the heat flux is increased from 0.11 to 0.60 W/cm2, tavg is increased by 3.8°C under the flow rate of 0.2 L/min, while that at the flow rate of 1.67 L/min is almost doubled. Meanwhile, the heat transfer coefficient is increased monotonously at the low flow rate, while that at the high flow rate is first decreased and then increased. Besides, lower surface temperatures can be obtained with low cold source temperatures. However, cold source temperatures affect temperature uniformity less.

Prediction on Thermal Performance of Refrigerant-Based Battery Thermal Management System for a HEV Battery Pack

Heating Strategy for Electric Vehicular Battery Pack Based on CFD Analysis

Theoretical and Experimental Investigations on Liquid Immersion Cooling Battery Packs for Electric Vehicles Based on Analysis of Battery Heat Generation Characteristics

Performance simulation of a heat pipe and refrigerant-based lithium-ion battery thermal management system coupled with electric vehicle air-conditioning

System simulation on refrigerant-based battery thermal management technology for electric vehicles

Thermal performance predictions for an HFE-7000 direct flow boiling cooled battery thermal management system for electric vehicles

Thermal performance analysis and burning questions of refrigerant direct cooling for electric vehicle battery

Experimental and numerical studies on an efficient transient heat transfer model for air-cooled battery thermal management systems

Design and analysis of electric vehicle thermal management system based on refrigerant-direct cooling and heating batteries

Optimized Design and Operation Control of Refrigerant Direct Cooling Thermal Management System for Power Battery

Experimental and numerical simulation study on the integrated thermal management system for electric vehicles

Optimizing a direct flow cooling battery thermal management with bod baffles for electric vehicles: An experimental and simulation study

Experimental study on thermal performance of a pumped two‐phase battery thermal management system

Numerical and Experimental Investigation on the Performance of Battery Thermal Management System Based on Micro Heat Pipe Array

Hybrid Battery Thermal Management System in Electrical Vehicles: A Review

Optimization of the Cooling Performance of Symmetric Battery Thermal Management Systems at High Discharge Rates

Review of thermal management system for battery electric vehicle

Performance Analysis of a Battery Thermal Management System Combining Thermoelectric, Composite Phase Change Material, and Liquid Cooling under Extreme Operating Conditions

CFD Simulation and Modelling of a Battery Thermal Management System: Comparison between Indirect and Immersion Cooling

Heating performance of heat pump air conditioning system for battery electric vehicle with different refrigerants

A review of air-cooling battery thermal management systems for electric and hybrid electric vehicles