Abstract:In this study gravity-driven membrane (GDM) ultrafiltration is investigated for the pretreatment of seawater before reverse osmosis (RO). The impacts of temperature (21 ± 1 and 29 ± 1 °C) and hydrostatic pressure (40 and 100 mbar) on dynamic flux development and biofouling layer structure were studied. The data suggested pore constriction fouling was predominant at the early stage of filtration, during which the hydrostatic pressure and temperature had negligible effects on permeate flux. With extended filtration time, cake layer fouling played a major role, during which higher hydrostatic pressure and temperature improved permeate flux. The permeate flux stabilized in a range of 3.6 L/m2 h (21 ± 1 °C, 40 mbar) to 7.3 L/m2 h (29 ± 1 °C, 100 mbar) after slight fluctuations and remained constant for the duration of the experiments (almost 3 months). An increase in biofouling layer thickness and a variable biofouling layer structure were observed over time by optical coherence tomography and confocal laser scanning microscopy. The presence of eukaryotic organisms in the biofouling layer was observed by light microscopy and the microbial community structure of the biofouling layer was analyzed by sequences of 16S rRNA genes. The magnitude of permeate flux was associated with the combined effect of the biofouling layer thickness and structure. Changes in the biofouling layer structure were attributed to (1) the movement and predation behaviour of the eukaryotic organisms which increased the heterogeneous nature of the biofouling layer; (2) the bacterial debris generated by eukaryotic predation activity which reduced porosity; (3) significant shifts of the dominant bacterial species over time that may have influenced the biofouling layer structure. As expected, most of the particles and colloids in the feed seawater were removed by the GDM process, which led to a lower RO fouling potential. However, the dissolved organic carbon in the permeate was not be reduced, possibly because some microbial species (e.g. algae) could convert CO2 into organic substances. To further improve the removal efficiency of the organic carbon, combining carrier biofilm processes with a submerged GDM filtration system is proposed.

Enhanced Filtration Performance of Biocarriers Facilitated Gravity-Driven Membrane (GDM) by Vacuum Ultraviolet (VUV) Pretreatment: Membrane Biofouling Characteristics and Bacterial Investigation

Chemical-free vacuum ultraviolet irradiation as ultrafiltration membrane pretreatment technique: Performance, mechanisms and DBPs formation

Optimization of Gravity-Driven Membrane (GDM) Filtration Process for Seawater Pretreatment.

Improved Ultrafiltration Performance Through Dielectric Barrier Discharge/sulfite Pretreatment: Effects of Water Matrices and Mechanistic Insights

Gravity-driven membrane coupled with oxidation technology to modify the surface properties and biofilm formation: Biofouling mitigation

Effect of vacuum ultraviolet/ozone pretreatment on alleviation of ultrafiltration membrane fouling caused by algal extracellular and intracellular organic matter

Application of UV/chlorine pretreatment for controlling ultrafiltration (UF) membrane fouling caused by different natural organic fractions

Comparative study of UV/chlorine and VUV/chlorine as ultrafiltration membrane pretreatment techniques: Performance, mechanisms and DBPs formation

VUV coupled with low-dose H2O2 as pretreatment prior to UF: Performance, mechanisms, DBPs formation and toxicity evaluation

Biological pretreatment coupled gravity-driven membrane filtration for purifying decentralized domestic wastewater toward resource reuse

Reduction of fouling of gravity-driven membrane by combined treatment of persulphate/nanoscale zero-valent iron/ultraviolet and dynamic dual coagulant flocs layer

Application of high-dose UV irradiation as nanofiltration pretreatment for drinking water production: Organic fouling mitigation and micropollutant removal

Membrane Fouling in Ultrafiltration of Natural Water after Pretreatment to Different Extents

Gravity-driven Membrane Filtration As Pretreatment for Seawater Reverse Osmosis: Linking Biofouling Layer Morphology with Flux Stabilization.

Improved Performance of Gravity-Driven Membrane Filtration for Seawater Pretreatment: Implications of Membrane Module Configuration.

Fabrication of Tween-20 Coated PVDF Membranes for Wastewater Treatment: Optimization of Preparation Parameters, Removal and Membrane Fouling Control Performance

Pre-depositing versus mixing powdered activated carbons for gravity-driven membrane systems during treated domestic wastewater filtration: Permeability stabilization and removal performance

Ultraviolet Grafting of Bismuth Oxide Enhances the Photocatalytic Performance of PVDF Membrane and Improves the Problem of Membrane Fouling

Modification of polyvinylidene fluoride membrane with ciprofloxacin to improve the bacteriostatic performance

Impact of Membrane Pore Morphology on Multi-Cycle Fouling and Cleaning of Hydrophobic and Hydrophilic Membranes During MBR Operation

Performance of gravity-driven membrane systems for algal water treatment: Effects of temperature and membrane properties