Abstract:In order to further study the blast mitigation performance of polyurea and to investigate the protection mechanism and damage characteristics of polyurea-protected structures under contact explosion loads, based on earlier work, this paper investigated the response and energy absorption performance of polyurea under various frequency loads. Qtech T26 blast mitigation polyurea (T26 polyurea) was adopted to protect the reinforced concrete (RC) slab and damage analysis of the post-explosion specimens was carried out at micro and macro levels. The response and energy absorption capacity of the material towards different frequency loads were investigated by dynamic mechanical analysis (DMA). Protective performance of T26 polyurea on RC slab was examined with a 10 kg TNT contact explosion test. Scanning electron microscopy (SEM) was employed to analyze the microscopic fracture morphology of the typical areas of the coating after the explosion. The chemical structure changes of the blast-face coating before and after the explosion were compared by Fourier transform infrared spectroscopy (FTIR). The results show that the glass transition region of T26 polyurea is −40 °C to 10 °C, which is a large temperature range, and the microphase separation of T26 polyurea is low. It is significantly influenced by the ambient temperature and loading frequency. The energy absorption of T26 polyurea is realized through the interaction between the hard and soft segments. When the frequency is between 102 Hz and 106 Hz, the loss factor of T26 polyurea is between 0.20 and 0.31, which exhibits a good energy dissipation performance. In the contact explosion of 10 kg TNT, the fragmentation rate of the coated specimen decreased significantly compared with that of the unprotected specimen, realizing the zero fragmentation protection effect on the back-blast face. The maximum deformation area and the main energy absorption area of T26 polyurea under contact explosion is the ring area outside the longitudinal deformation area. The chemical structure of T26 polyurea changed significantly after the explosion; typically the N-H bonds, etc., were broken and the percentage of hydrogen bonding was reduced. T26 polyurea has realized the protection effect of zero fragmentation of large-equivalent contact explosion, which has a high application value for blast mitigation and blast-fragmentation prevention in actual engineering.

Experimental and analytical study on blast resistance performance of brick infill walls strengthened with polyuria

Blast Resistance of 240 mm Building Wall Coated with Polyurea Elastomer

Blast response of clay brick masonry unit walls unreinforced and reinforced with polyurea elastomer

Damage behavior and assessment of polyurea sprayed reinforced clay brick masonry walls subjected to close-in blast loads

Experimental and Numerical Study on CFRP Strip Strengthened Clay Brick Masonry Walls Subjected to Vented Gas Explosions

Experimental Investigation on the Performance of Polyurea-Coated Structure Under Blast Loads

Responses of Masonry Infill Walls Retrofitted with CFRP, Steel Wire Mesh and Laminated Bars to Blast Loadings

EXPERIMENTAL INVESTIGATION ON CONCRETE PERFORATED BRICK WALL SHINKAGE AT DIFFERENT AGES

Effect of Spraying Polyurea on the Anti-Blast Performance of the Ultra-High Performance Concrete Slab

Experimental and Numerical Study of Basalt Fiber Reinforced Polymer Strip Strengthened Autoclaved Aerated Concrete Masonry Walls under Vented Gas Explosions

Experimental and Numerical Study of Unreinforced Clay Brick Masonry Walls Subjected to Vented Gas Explosions

Performance of retrofitted autoclaved aerated concrete masonry walls subjected to gas explosions

Optimization Design and Dynamic Responses of CFRP Reinforced Masonry Infilled Wall Subjected to Vented Gas Explosion

Performance of Concrete-Filled Bilateral Steel Plate Composite Shear Walls with Replaceable Energy Absorbing and Protective Structures under the Blast Loads

Strengthening and converse strengthening effects of polyurea layer on polyurea–steel composite structure subjected to combined actions of blast and fragments

Dynamic response of reinforced masonry structure under blast load

Study of Blast Mitigation Performance and Fracture Mechanism of Polyurea under Contact Explosion

Blast responses of polyurea-coated concrete arches

Analysis and Design for the Comprehensive Ballistic and Blast Resistance of Polyurea-Coated Steel Plate

Recent Developments in Polyurea Research for Enhanced Impact Penetration Resistance and Blast Mitigation

Polyurea Coating for Foamed Concrete Panel:An Efficient Way to Resist Explosion