Abstract:Masonry walls are commonly preferred in the construction of low-rise buildings due to their proven efficiency in resisting gravity loads and their relatively low material and labor costs. However, few studies investigating the behavior of retrofitted buildings under blast loading have been found in the literature. This paper describes the first comprehensive study investigating the efficiency of four retrofitting techniques for a low-rise masonry building under blast loading. The investigated retrofitting materials were textile-reinforced mortar (TRM), carbon-fiber-reinforced polymers (CFRPs), glass-fiber-reinforced polymers (GFRPs), and polypropylene bands (PPBs). Compared with regular reinforcing steel, these materials have light weight, high corrosion resistance, and perfect durability properties, in addition to their ease of application. A three-dimensional applied element model (AEM), which accounts for both geometric and material nonlinearities, was developed and validated to analyze an existing four-story masonry building under blast loading. Material nonlinearity was considered by including nonlinear models for masonry, mortar, TRM, CFRPs, and PPBs. Masonry blocks were modeled using brick elements, while the in-between mortar was modeled using spring elements. Validation of the AEM was by modeling masonry walls taken from the literature and comparing their results with counterparts obtained from experiments from the literature. Cracking pattern, displacements, support rotation, and load capacity for the investigated building with and without retrofitting using the four materials were compared. Costs were compared based on market prices. Retrofitting the case study building with TRM, CFRPs, GFRPs, and PPBs reduced maximum support rotation by 39%–98%, 28%–88%, 33%–92%, and 9%–84%, respectively, and increased blast load capacity by 35%–404%, 48%–91%, 83%–135%, and 26%–46%, respectively. The study revealed that retrofitting the investigated building with TRM provided the optimum behavior in terms of cost, crack propagation, and blast load capacity.

Responses of Masonry Infill Walls Retrofitted with CFRP, Steel Wire Mesh and Laminated Bars to Blast Loadings

Dynamic Progressive Collapse Response of Multi-Storey Frame Structures with Masonry Infills

Analysis of the Dynamic Response in Blast-Loaded CFRP-Strengthened Metallic Beams

Assessment of Retrofitting Techniques for a Four-Story Masonry Building to Resist Blast Loading

Quasi-static, Cyclic Loading Tests of RAC Brick Masonry Walls Strengthened by Basalt Textile Reinforced Concrete

Enhancement of the impact resistance of masonry walls using fiber-reinforced polymer composites

Numerical and Experimental Investigation on Cyclic Behavior of Masonry Infill Walls Retrofitted with CFRP

Experimental Study of Masonry Walls Strengthened with Cfrp

Seismic Performance of Unreinforced Masonry Walls with Various Retrofitting Methods

Out-of-plane strengthening of URM walls using different fiber-reinforced materials

Finite element modeling of FRP retrofitted RC column against blast loading

A Comparative Study on Blast-Resistant Performance of Steel and PVA Fiber-Reinforced Concrete: Experimental and Numerical Analyses

Investigating the Retrofitting Effect of Fiber-Reinforced Plastic and Steel Mesh Casting on Unreinforced Masonry Walls

Numerical Simulation Study of Progressive Collapse of Reinforced Concrete Frames with Masonry Infill Walls under Blast Loading

Blast response of clay brick masonry unit walls unreinforced and reinforced with polyurea elastomer

Experimental Study on the Blast Resistance Performance of FRP Grid & Mortar Reinforced Concrete Arch Structure

MECHANICAL BEHAVIOR OF MASONRY WALLS STRENGTHENED WITH CFRP

Quasi-static in-plane behavior of full-scale unreinforced masonry walls retrofitted using ferro-cement overlay

Spalling in Concrete Arches Subjected to Shock Wave and CFRP Strengthening Effect

EXPERIMENTAL STUDY OF A MASONRY BUILDING RETROFITTED INTEGRALLY BY PRE-FABRICATED RC PANELS

Study on the Impact Resistance of FRP Pasted onto a Blastproof Partition Wall under Out-of-Plane Repeated Impact Load