Abstract:The formula describing the relationship between the dielectric constant of a composite and the dielectric constants or volume rates of its components is called a dielectric model. The establishment of a cement concrete dielectric model is the basic and key technique for applying electromagnetic wave technology to concrete structure quality testing and internal damage detection. To construct the dielectric model of carbon nanofiber reinforced concrete, the carbon nanofiber reinforced concrete was measured by the transmission and reflection method for dielectric constant ε, and ε,, in the frequency range of 1.7~2.6 GHz as the fiber content was 0, 0.1%, 0.2%, 0.3% and 0.5%. Meanwhile, concrete was considered as a composite material composed of three phases, matrix (mortar), coarse aggregate (limestone gravel) and air, and the dielectric constants and volume rates of each component phase were tested. The Brown model, CRIM (Complex Refractive Index Model) model and Looyenga model commonly used in composite materials were modified based on the experimental data, suitable dielectric models of carbon nanofiber reinforced concrete were constructed, and a reliability check and error analysis of the modified models were carried out. The results showed that the goodness of fit between the calculated curves based on the three modified models and the measured curves was very high, the accuracy and applicability were very strong and the variation rule for the dielectric constant of carbon nanofiber concrete with the frequency of electromagnetic wave could be described accurately. For ε, and ε,,, the error between the dielectric constant calculated by the three modified models and the corresponding measured values was very small. For the dielectric constant ε,, the average error was maintained below 1.2%, and the minimum error was only 0.35%; for the dielectric constant ε,,, the average error was maintained below 3.55%.

Study on Dielectric Model for Capacitance-Based Nondestructive Testing of Water Content in Concrete

A New Electrical Resistance Measurement Method of Carbon Fiber-Reinforced Polymer Tubes Based on C⁴D Technique

Theoretical Analyses and Experimental Research on A Cement Concrete Dielectric Model

Comprehensive Dielectric Model of Cement Concrete Including Frequency and Temperature

Theoretical Model for Estimation of Ice Content of Concrete by Using Electrical Measurements

Experimental study of capillary water absorption in damage concrete and prediction of water content distribution

Dielectric Model of Carbon Nanofiber Reinforced Concrete

Mechanical and Microstructure Characterization of Fresh High- and Normal- Strength Concrete with Non-Contact Electrical Resistivity Measurement

The Relationship Between Electrical Capacitance-Based Dielectric Constant and Soil Water Content

Determination of Water Content for Early-Age Concrete Based on Dielectric Constant

Numerical Modeling Of The Effect Of Concrete Porosity Evolution On Electrochemical Chloride Removal From Concrete Structures

Mesoscale Modeling of Water Penetration into Concrete by Capillary Absorption

Monitoring of Mix-Proportions of Concrete by Using Microwave Permittivity Measurement

Dielectric constant modelling of Chinese-standard concretes for wireless monitoring of structures

Theoretical modeling on the temperature-dependent dielectric properties of concrete pavement materials

Modeling of Ion Diffusion Coefficient in Saturated Concrete

Prediction model for the thermal conductivity of concrete based on its composite structure

Characterization of Microstructure and Moisture Distribution Evolution of Concrete Using AC Impedance Spectroscopy

Water Transport in Concrete Coupled with Short-term Sustained Compressive Loading

Mesoscale Modeling of Chloride Penetration in Unsaturated Concrete Damaged by Freeze-Thaw Cycling

Piezopermittivity of cement mortar with various water contents and its application to capacitance-based structural self-sensing of stress