Abstract:<p>Three-dimensional seven-directional (3D7d) braided composites had potential application in aerospace field and they were successfully fabricated. The compression mechanical properties of composites are thoroughly studied based on different load modes and high temperature influence. Then, the failure mechanism is evaluated using Macro-fracture and SEM micrographs. The results show that as temperature increases, the stress vs. strain curves decrease monotonically and present nonlinearity feature. Meanwhile, the out-of-plane compression properties among three loading direction modes is the best, following by longitudinal, and transverse is the worst. 3D7d structure significantly improves the out-of-plane properties compared to 3D6d, 3D5d and 3D4d structure. Meanwhile, it also makes the transverse properties higher than those of 3D5d and 3D4d structure. Moreover, failure mechanism of 3D7d braided composites varies with loading mode and temperature. Out-of-plane compression shows multiple 45° shear failure, and compacted gradually. Longitudinal compression behaves as local outward expansion and multiple shear features along the braiding yarn/matrix interface. Transverse compression exhibits shear fracture at 45° in-plane direction. At high temperatures, the shear fracture feature still dominated the main failure. The matrix gets soft, cracks and comes plastic, and the interfacial adhesion of fiber/matrix is significantly reduced.</p>

Experimental Study on the Low-Temperature Compression Performance of 3D Five-Directional Braided Composites Applied to Extreme Environments

Experimental Investigation on the Compression Properties and Failure Mechanism of 3D Braided Composites at Room and Liquid Nitrogen Temperature

Liquid Nitrogen Temperature Effects on the Mechanical Behaviors of Three-Dimensional Seven-Directional Braided Composites

A novel mechanical behavior and failure mechanism analysis of 3D six-directional braided composites in liquid nitrogen subjected to compression

Longitudinal compression fatigue properties of 3D five-directional braided composites at different temperatures

Study on in-plane compression properties and numerical modeling of three dimensional five-directional braided composites

Experimental study on the fabrication, high-temperature properties and failure analysis of 3D seven-directional braided composites under compression

Evaluation of multi-directional compression behaviors and failure of three-dimensional orthogonal woven composites via liquid nitrogen temperature

Mechanical Properties and Failure Mechanisms of 3D Six-Directional Braided Composites at Elevated and Liquid Nitrogen Temperatures

High Temperature Mechanical Response and Failure Analysis of 3D Five-Directional Braided Composites with Different Braiding Angles.

Experimental Study on the Bending Properties and Failure Mechanism of 3d Multi-Axial Warp Knitted Composites at Room and Liquid Nitrogen Temperatures

Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle

High‐temperature Properties and Failure Mechanism of 3D Six‐directional Braided Composites under Out‐of‐plane Compression

Compressive properties and failure mechanism of three dimensional and five directional carbon fiber/phenolic braided composites

Mechanical Behavior and Failure Mechanism of Three-Dimensional Braided Composites at Different Temperatures

On the tensile properties and failure mechanisms of 3D six-directional braided composites at elevated temperatures

Transverse bending fatigue behaviors and failure mechanisms of 3D five-directional braided composites at different temperatures

A Comparative Study on the Tensile Properties and Failure Mechanism of 3D MWK Composites at Room and Liquid Nitrogen Temperature

Comparison Study on Bending Properties and Failure of 3d5d and 3d6d Carbon/phenolic Braided Composites at Room and Elevated Temperatures

Effect of temperature on bending properties and failure mechanism of three-dimensional braided composite

Mechanical Response and Failure of 3D MWK Carbon/epoxy Composites at Cryogenic Temperature