Abstract:A key issue in designing and optimizing Stirling engines is to build a precise thermodynamic model to predict the output power, thermal efficiency, and detailed performance properties and provide useful information for further improvement. In this study, a thermodynamic model called Improved Simple Analytical Model (ISAM) was proposed, carefully considering heat and power losses in Stirling engines. A 100 W beta-type Stirling engine was built and tested with helium and nitrogen when pressure and rotary speed ranging from 1.6 MPa to 3 MPa and 260 r/min to 1380 rimin, respectively. Experimental information on performance, such as PV diagrams and temperatures of the heater and cooler, was much detailed. Increasing rotary speed brings a "thin" PV diagram because it made compression and expansion processes become more imperfect, indicating heat transfer enhancement was necessary for compression and expansion chamber in a high speed Stirling engine. Shaft power reached the maximum value of 30.1 W for helium and 21.0 W for nitrogen at rotary speeds of 1000 r/min and 650 r/min, respectively. Improving the mean pressure of gas increased the indicated power, cycle efficiency, shaft power, and electrical power. The maximum indicated power and cycle efficiency were 165 W and 16.5% for helium and 139 W and 12.2% for nitrogen in the same working conditions of 2.96 MPa and 1120 r/min. The ISAM agrees well with the experimental data with a deviation of 4.3-13.4% for helium and 1-7.1% for nitrogen. Analysis of energy losses with ISAM indicated that helium had larger shuttle and seal leakage losses and smaller flow resistance and regenerator heat transfer losses than nitrogen under the same working conditions. Flow resistance and regenerator heat transfer losses, which increased much more rapidly than seal leakage or shuttle heat losses with the increase in rotary speed and pressure, played an important role and resulted in different performances with the two working gases. This study provides comprehensive understanding of the influence mechanism of rotary speed, pressure and working gas in the view of heat/power losses for Stirling engine performance, and recommends that more work (e.g., mechanisms of heat and power losses and PV diagrams) should be performed to improve the precision of second-order models. (C) 2016 Elsevier Ltd. All rights reserved.

Thermochemical Recuperation for Stirling Engines by Diesel Steam Reforming: Thermodynamic Analysis

Experimental Investigation on Heat Transfer and Combustion of a Stirling Engine Combustor Fueled by Reformed Gas and Diesel Fuel

Working Mechanism and Characteristics of Gas Parcels in the Stirling Cycle

Investigation of Organic Rankine Cycle Integrated with Double Latent Thermal Energy Storage for Engine Waste Heat Recovery

Experimental Investigations on Dynamic Performance of Organic Rankine Cycle Integrated with Latent Thermal Energy Storage under Transient Engine Conditions

Solar Hybrid Steam-Injected Gas Turbine System with Novel Heat and Water Recovery

Using Supercritical Heat Recovery Process in Stirling Engines for High Thermal Efficiency

Thermodynamic analysis of an in-cylinder waste heat recovery system for internal combustion engines

Convective meta-thermal concentration for ultrahigh efficient Stirling engine with waste heat and cold utilization

A Third-Order Numerical Model and Transient Characterization of a Β-Type Stirling Engine

Thermal Management Evaluation for Advanced Aero-Engines Using Catalytic Steam Reforming of Hydrocarbon Fuels

Thermodynamic Analysis for a Chemically Recuperated Scramjet

Performance analysis and multi-objective optimization based on a modified irreversible Stirling cycle

An Analysis of the Thermodynamic Process of a Gas Turbine-based Chemical Recuperative Cycle

Waste Heat Recovery of Biomass Based Industrial Boilers by Using Stirling Engine

Thermodynamic Analysis of Supercritical Carbon Dioxide Cycle for Internal Combustion Engine Waste Heat Recovery

Analysis of Recuperation Supercritical Carbon Dioxide Cycle for Heat Recovery of an Aircraft Engine

Improved Simple Analytical Model and Experimental Study of a 100W Β-Type Stirling Engine

Performance Analysis of Heat Pipe Micro-Reactor with Stirling Engine Based on Full-Scope Multi-Physics Coupled Simulation

Theoretical Analysis of Engine Waste Heat Recovery by the Combined Thermo-Generator and Organic Rankine Cycle System

Numerical study on regenerative effectiveness of parallel-plate regenerator for Stirling engine